ANNA: a toolbox for Newtonian Noise Analysis Journal: To be determined.
P. Reumers, X. Kuci, S. François, G. Degrande · 2026
Read ANNA: a toolbox for Newtonian Noise Analysis Journal: To be determined. by P. Reumers, X. Kuci, S. François, G. Degrande (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-15157.txt.
Introduction
Reumers and co-authors present a finite element method for computing Newtonian noise in gravitational wave detectors. Seismic waves shake the soil and change its density, which tugs on the interferometer mirrors. Their formulation splits the noise into total, bulk, and surface parts on a finite element mesh. Coupling matrices depend only on geometry and material, so new wave fields reuse them cheaply. Tests on plane waves and a Rayleigh wave case match reference results. The method ships in the ANNA toolbox for MATLAB and Python.
Catalog record
| CREATOR | P. Reumers, X. Kuci, S. François, G. Degrande |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 79590 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.15157
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
ANNA: a toolbox for Newtonian Noise Analysis Journal: To be determined. P. Reumers, X. Kuci, S. François, G. Degrande Abstract The Einstein Telescope (ET) is a third-generation underground gravitational wave observatory designed to achieve an unprecedented sensitivity down to 3 Hz. Waves propagating in the soil due to anthropogenic or natural vibration sources generate density fluctuations which cause gravitational attraction, resulting in motion of the mirrors of the laser interferometer known as Newtonian noise. The latter is computed by integrating density fluctuations due to seismic wave fields over the soil domain surrounding the test mass. ANNA Newtonian Noise Analysis is a toolbox that computes Newtonian Noise from a seismic wave field defined on a finite element mesh, using Gaussian quadrature. 3D finite element meshes composed of linear and quadratic tetrahedral (4-node and 10-node) and brick (8-node and 20-node) elements are supported. The user computes (or interpolates) a seismic wave field on a finite element mesh and the toolbox computes the total Newtonian noise, as well as the bulk and surface contributions. ANNA runs in the MATLAB programming and numeric computing platform and is compatible with the open-source GNU Octave Scientific Programming Language; a Python version is also available. The toolbox is verified for plane P- and S-waves propagating in an elastic homogeneous full space with a mirror suspended in a spherical cavity, assuming that the wavelength is much larger than the radius of the cavity, so that wave scattering can be ignored. Excellent agreement with analytical solutions is obtained. Similar good agreement is reported for the Newtonian noise on a test mass suspended at a finite distance above the free surface of a homogeneous elastic halfspace in which a Rayleigh wave propagates. The proposed finite element framework provides a physically consistent and computationally efficient approach for computing gravitational-seismic coupling in heterogeneous media. 1 Introduction The Einstein Telescope is a third-generation gravitational wave detector that is planned to be constructed in the coming decade [ 1 ] . It consists of an underground triangular laser interferometer and is designed to observe gravitational waves – ripples in the 4D space-time continuum – due to e.g. binary black hole or binary neutron star mergers. The mirrors of the laser interferometer are installed in suspension towers placed inside large caverns at the corner points of the interferometer. To observe gravitational waves caused by mergers at a larger distance or with a larger mass, the sensitivity and operating frequency range (above 10 Hz) of second-generation gravitational wave detectors such as LIGO and Virgo are insufficient [ 1 ] . In order to improve the sensitivity by one order of magnitude and to reduce the operating frequency to 3 Hz, the Einstein Telescope is preferably constructed underground in a seismically quiet region [ 2 ] so that disturbance by anthropogenic vibration sources such as road and railway traffic, wind turbines, quarries, industry and construction activities is maximally reduced. Seismic Newtonian noise dominates at low frequencies: seismic waves propagating in the soil generate density fluctuations, which result in gravitational attraction and corresponding motion of the mirrors of the laser interferometer. Since these gravitational forces cannot be shielded, the only mitigation measure is to estimate Newtonian noise from seismic measurements through wave field reconstruction and to subtract it from the interferometer data [ 3 ] . Analytical solutions for Newtonian noise are available for simplified problems involving plane harmonic P- or S-waves propagating in a homogeneous linear elastic full space [ 4 ] , assuming that the wavelength is much larger than the dimensions of the cavity so that wave scattering can be neglected. Harms [ 4 ] also derived an analytical solution for the Newtonian noise on a mirror suspended at a finite distance above the free surface of a homogeneous linear elastic halfspace, excited by a harmonic Rayleigh wave. In practice, however, the topology and geology of a site are more complicated, involving hills, valleys, stratification due to sedimentation processes, as well as folding of soil and rock layers. Seismic wave fields are caused by a variety of anthropogenic vibration sources and affected by the soil’s topology and layering, as well as the interferometer’s caverns, tunnels, and shafts. As a result, numerical methods are required to compute the seismic wave field and the corresponding Newtoninan Noise. Several methods are available to compute a three-dimensional (3D) seismic wave field due to anthropogenic vibration sources, accounting for dynamic soil-structure interaction. A direct stiffness formulation or thin layer method [ 5 ] , as implemented in the ElastoDynamics Toolbox for MATLAB [ 6 ] , is used to model surface waves or forced vibration due to harmonic or transient excitation in horizontally layered media. Vibration due to road and railway traffic can be computed with the TRAFFIC toolbox in MATLAB, which couples a semi-analytical road or track model to a two-and-a-half (2.5D) dimensional boundary element (BE) model of the layered soil [ 7 , 8 , 9 ] ; alternatively the MOTIV [ 10 , 11 , 12 ] and MEFISSTO [ 13 ] packages can be used. 3D finite element formulations equipped with infinite elements, absorbing boundary conditions or perfectly matched layers [ 14 , 15 , 16 , 17 ] , coupled finite element-boundary element formulations [ 18 , 13 , 19 ] and spectral element models such as SPECFEM3D and SPEED [ 20 ] can be employed to solve more complicated dynamic soil-structure interaction problems, suca as vibration caused by trains running on bridges or by wind turbines and wave scattering by the interferometer’s caverns, tunnels and shafts. Assuming that the seismic wave field is computed or interpolated on a 3D finite element mesh, this paper presents the ANNA Newtonian Noise Analysis toolbox that predicts the Newtonian noise on a mirror by means of a 3D finite element formulation. The volume integral that quantifies the total Newtonian noise of the seismic wave field is computed by means of Gaussian quadrature, together with the bulk and surface contributions. This finite element formulation is verified by means of the aforementioned analytical formulations. We consider the Newtonian noise on a mirror suspended in a spherical cavity in a homogeneous linear elastic full space, excited by plane P- or S-waves [ 4 ] , as well as a mirror suspended at a finite distance above the free surface of a homogeneous linear elastic halfspace, excited by a Rayleigh wave [ 4 ] . The paper is organized as follows. Section 2 presents expressions for the total derivative of the gravitational potential, as well as total Newtonian noise which is decomposed in a bulk and surface contribution. Section 3 develops a finite element formulation to evaluate the Newtonian noise for a seismic wave field defined on a finite element mesh. Expressions are derived for finite element matrices that, when multiplied with the seismic displacement vector, result in the total Newtonian noise, as well as the bulk and surface contribution. Section 4 presents the verification of the proposed finite element formulation by means of problems for which an analytical solution is available. Particular attention is paid to adequate finite element mesh refinement in order to guarantee accurate evaluation of the Newtonian noise. Section 5 summarizes the conclusions of the paper. 2 Theoretical