Self-Force of a Dirac String: An Explicit Calculation

Alberto G. Rojo · 2026

Read Self-Force of a Dirac String: An Explicit Calculation by Alberto G. Rojo (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-14429.txt.

Introduction

Rojo computes the self-force of a Dirac string in direct, elementary terms. A Dirac string acts as a half-endless solenoid that carries a fixed magnetic flux. Dirac noted the string should feel a nonzero force that grows without bound, but worked examples are rare. Rojo stacks the string as current loops and sums the pull from the radial field of the rest. The force scales with flux squared over radius squared, so it blows up as the radius shrinks to zero.

Catalog record

CREATORAlberto G. Rojo
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE5932
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.14429

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Self-Force of a Dirac String: An Explicit Calculation
Alberto G. Rojo

Abstract




The Comment by McDonald
McDonald2026
shows how the force between two strings derived in Ref.
Rojo2026
can be used to illuminate a subtle limitation of the Dirac monopole model. Dirac
Dirac1948
already noted that a string would experience a nonvanishing and, in fact, divergent self-force. At first sight this conclusion may seem surprising, since the Dirac string closely resembles an ordinary solenoid, whose self-force vanishes. McDonald’s argument is concise and insightful, but it relies on a somewhat sophisticated application of the two-string result. In the same spirit as Ref.
Rojo2026
, which presented an elementary derivation of the monopole–monopole interaction, we offer here an elementary derivation of a string’s self-force.

We model a Dirac string as a semi-infinite solenoid of radius
a
, carrying a
current
I
with
n
turns per unit length, so that the magnetic flux inside
is
\Phi=\mu_{0}nI\pi a^{2}
.
(In the monopole limit, the magnetic charge
g=\Phi/\mu_{0}
is a constant while
a\rightarrow 0
and
I\rightarrow\infty
.)
The self-force along the axis (
z
-direction) arises from the interaction of each current loop with the radial
magnetic field,
B_{\rho}
, produced by all other loops in the solenoid.

The radial component of the magnetic field at a point on the surface
of the solenoid can be extracted from the azimuthal vector potential via

B_{\rho}(a,z)=-\frac{\partial A_{\phi}}{\partial z}.

(1)

We will show that, at any
z
, this derivative reduces to the value of the vector potential due to the differentially small loop at the end of the solenoid
(z=0)
.

The vector potential can be found from an integral over the current
\mathbf{I}=I\hat{\boldsymbol{\phi}}
:

\displaystyle\mathbf{A}(a,z)

\displaystyle=

\displaystyle\frac{\mu_{0}}{4\pi}\int_{0}^{\infty}n\,dz^{\prime}\int_{0}^{2\pi}\frac{I\hat{\boldsymbol{\phi^{\prime}}}}{|\mathbf{r}-\mathbf{r^{\prime}}|}a\,d\phi^{\prime}

\displaystyle\equiv

\displaystyle\frac{\mu_{0}na}{4\pi}\int_{0}^{\infty}\,dz^{\prime}\int_{0}^{2\pi}\frac{I\hat{\boldsymbol{\phi^{\prime}}}d\phi^{\prime}}{\sqrt{2a^{2}(1-\cos\phi^{\prime})+(z-z^{\prime})^{2}}}

By symmetry, this result will be purely in the azimuthal direction.

Because the solenoid is semi-infinite, as shown in Fig. 1, the difference between
\mathbf{A}(a,z)
and
\mathbf{A}(a,z+dz)
is simply:

\mathbf{A}(a,z+dz)-\mathbf{A}(a,z)=dz\frac{\mu_{0}na}{4\pi}\int_{0}^{2\pi}\frac{I\hat{\boldsymbol{\phi^{\prime}}}d\phi^{\prime}}{{\sqrt{4a^{2}\sin^{2}(\phi^{\prime}/2)+z^{2}}}}

(2)

and therefore
B_{\rho}(a,z)=-\partial A_{\phi}/\partial z
is equal to the azimuthal
A_{\phi}
due to this bottom loop:

B_{\rho}(z)=-\frac{\mu_{0}nIa}{4\pi}\int_{0}^{2\pi}\frac{\cos\phi^{\prime}}{\sqrt{4a^{2}\sin^{2}(\phi^{\prime}/2)+z^{2}}}\,d\phi^{\prime}.

(3)

The total self-force along the axis is obtained by integrating the axial force
on each current loop. A single loop of radius
a
carrying current
I\hat{\boldsymbol{\phi}}
in a
radial field
B_{\rho}\hat{\boldsymbol{\rho}}
experiences an axial force
-2\pi aIB_{\rho}\hat{\mathbf{k}}
, so
integrating over all loops gives

\displaystyle F_{z}

\displaystyle=

\displaystyle-2\pi a\,nI\int_{0}^{\infty}B^{\text{sol}}_{\rho}(z)\,dz

(4)

\displaystyle=

\displaystyle\frac{\mu_{0}n^{2}I^{2}a^{2}}{2}\underbrace{\int_{0}^{\infty}dz\int_{0}^{2\pi}\frac{\cos\phi^{\prime}}{\sqrt{4a^{2}\sin^{2}(\phi^{\prime}/2)+z^{2}}}}_{\displaystyle=\,\pi}.

(5)

In the Supplementary material we show that the double integral equals
\pi
.

Expressing this in terms of the magnetic flux
\Phi=\mu_{0}nI\pi a^{2}
,
we obtain the compact result

{F_{z}=\frac{\Phi^{2}}{2\pi\mu_{0}a^{2}}.}

(6)

In the Dirac string limit
a\to 0
with
\Phi
held fixed, the self-force
diverges as
1/a^{2}
, confirming the observation of McDonald
McDonald2026

and the concern raised by Dirac himself
Dirac1948
.
Equation (
6
) makes the nature of this divergence explicit:
it is the unavoidable price of concentrating a finite magnetic flux into a
vanishing cross-section.
It may seem surprising that the semi-infinite solenoid considered here experiences a nonvanishing self-force even before taking the Dirac string limit
a\to 0
. A finite solenoid, of course, experiences no net self-force, since the magnetic stresses at its two ends cancel. The nonzero result obtained here reflects the fact that a semi-infinite solenoid is an idealization: by removing one end, one also removes the compensating magnetic stresses required for overall momentum balance
*
*

*

The Maxwell stress tensor, applied to the semi-infinite solenoid, enables a more compact derivation of the self-force for more advanced students; this is presented in the supplementary material.

. In that sense, the semi-infinite configuration should be viewed as a limiting construction rather than as a physically realizable object.
In summary, the self-force of a Dirac string can be understood as the edge
force of a solenoid once the cancellation between its two ends is removed.
Holding the magnetic flux fixed while shrinking the cross section makes the
associated magnetic pressure diverge, leading to the
1/a^{2}
behavior obtained above.

y
x
z
z=0
\vdots
\vdots
z
B_{\rho}(a,z)

Figure 1:
Semi-infinite cylinder represented as a stack of current loops.
Arrows indicate the direction of the circulating current of magnitude
I
.
The integrals to find
A(a,z)
and
A(a,z+dz)
are nearly identical; they
differ only due to the inclusion in the second integral of the ring located
in the range
z=0\rightarrow dz
.
Since
B_{\rho}=(\nabla\times\mathbf{A})_{\rho}=-\partial A_{\phi}/\partial z
,
the magnitude of the radial component of the magnetic field at height
z

on the surface of the semi-infinite cylinder,
B_{\rho}(a,z)
, is equal to the
magnitude of the vector potential
A_{\phi}(a,z)
produced by the ring at the

Read the complete text