Energy-Aware Integrated Proactive Maintenance Planning and Production Scheduling

Hongliang Li, Herschel C. Pangborn, Ilya Kovalenko · 2026

Read Energy-Aware Integrated Proactive Maintenance Planning and Production Scheduling by Hongliang Li, Herschel C. Pangborn, Ilya Kovalenko (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-14060.txt.

Introduction

Li, Pangborn, and Kovalenko join maintenance planning with production scheduling under real-time electricity pricing. Shifting work to cheap hours saves energy costs, but worn machines run slower and draw more power. Maintenance restores health at the cost of downtime, which clashes with cheap-hour plans. Their two-level framework sets maintenance plans at the top level with day-ahead prices in view. A model predictive controller then runs live scheduling against real prices. A battery pack assembly case shows gains in simulation.

Catalog record

CREATORHongliang Li, Herschel C. Pangborn, Ilya Kovalenko
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE34321
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.14060

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Energy-Aware Integrated Proactive Maintenance Planning and Production Scheduling Hongliang Li, Herschel C. Pangborn, Ilya Kovalenko Abstract Demand-side energy management, such as the real-time pricing (RTP) program, offers manufacturers opportunities to reduce energy costs by shifting production to low-price hours. However, this strategy is challenging to implement when machine degradation is considered, as degraded machines have decreased processing capacity and increased energy consumption. Proactive maintenance (PM) can restore machine health but requires production downtime, creating a challenging trade-off: scheduling maintenance during low-price periods sacrifices energy savings opportunities, while deferring maintenance leads to capacity losses and higher energy consumption. To address this challenge, we propose a hierarchical bi-level control framework that jointly optimizes PM planning and runtime production scheduling, considering the machine degradation. A higher-level optimization, with the lower-level model predictive control (MPC) embedded as a subproblem, determines PM plans that minimize total operational costs under day-ahead RTP. At runtime, the lower-level MPC executes closed-loop production scheduling to minimize energy costs under realized RTP, meeting delivery targets. Simulation results from a lithium-ion battery pack assembly line case study demonstrate that the framework strategically shifts PM away from bottlenecks and high-price hours, meeting daily production targets while reducing energy costs. I Introduction The manufacturing sector accounts for roughly 30% of global energy use [ 8 ] . Since electricity cost represents about 40% of primary production, manufacturers are highly motivated to curb their electricity spending [ 5 ] . Demand-side energy management (DSM) can reduce these costs by shifting energy-intensive activities to off-peak hours [ 11 ] . One prominent DSM program is real-time pricing (RTP), in which electricity prices vary with grid conditions, including demand and renewable availability [ 4 ] . Under RTP, manufacturers can proactively reschedule production to low-price periods, reducing utility charges without additional capital investment. In practice, however, RTP-based scheduling is complicated by machine degradation. Machine health evolves due to wear, fatigue, and operating stress [ 26 ] . Degradation undermines RTP benefits in two ways: (1) effective capacity declines, limiting flexibility to shift loads, and (2) energy consumption rises as health deteriorates, eroding savings even during low-price hours [ 14 ] . Therefore, operators face a trade-off between meeting deliveries at high energy cost and risking missed targets while waiting for off-peak prices. Fig. 1: The proposed hierarchical control framework coordinates PM planning with runtime production scheduling, achieving system-level energy-efficiency improvements and energy cost savings. Dashed arrows denote information flow, while solid arrows denote maintenance execution, energy supply, and product delivery. Proactive Maintenance (PM) restores machine health before failures occur [ 9 ] . However, PM requires scheduled downtime, interrupting production and reducing system flexibility. Scheduling maintenance during low-price hours sacrifices opportunities for cost-effective production, whereas deferring maintenance risks operating with degraded capacity and reduced efficiency [ 20 ] . PM planning is further constrained by resource and time limits. Balancing these factors yields a coupled planning problem that requires co-optimizing production scheduling and PM decisions with joint awareness of energy prices and machine health. Existing literature has not fully addressed this intersection. Most RTP scheduling formulations assume static health, treating machine capacity as time-invariant and decoupled from energy efficiency [ 10 , 12 ] . PM optimization typically prioritizes reliability, spare parts, and workforce costs without co-optimizing against energy efficiency [ 24 ] . The few integrated approaches often adopt sequential decision-making and do not consider the bidirectional connections between production (driving degradation) and PM (altering future capacity and efficiency) [ 1 ] . Another challenge is the inherent temporal mismatch, as PM is planned over long horizons, while production must react on short horizons to accommodate runtime plant operations. Hierarchical control provides an effective framework for coordinating multi-timescale decisions by considering them at different control layers [ 18 ] . A hierarchical model predictive control (MPC) has been applied to a renewable-powered ammonia plant, using a slow-timescale layer for storage and process control and a fast-timescale layer to manage the variability of the energy resource [ 22 ] . However, implementing hierarchical control is challenging: effective coordination requires models that capture the connections among machine degradation, PM actions, and production dynamics, such as health-dependent processing capacity and energy consumption. This paper proposes a hierarchical bi-level control framework that jointly optimizes PM planning and production scheduling under RTP, as shown in Fig. 1 . The higher level optimizes the PM plan offline by solving a bi-level optimization that accounts for day-ahead RTP with the lower-level MPC embedded as a subproblem to evaluate the production cost and feasibility of each candidate plan. At runtime, the lower level executes hourly production scheduling in closed loop under actual RTP, ensuring delivery targets and health-adjusted constraints. The main contributions are: (1) a unified state-space model that links buffer/machine dynamics with health evolution and energy use, (2) a hierarchical bi-level control framework that coordinates the PM planning and production scheduling, and (3) a case study that demonstrates the proposed control framework. The remainder of the paper is organized as follows. Section II provides the assumptions and problem statement. Section III describes the system model. Section IV details the hierarchical control framework. Section V presents case study results. Section VI provides conclusions and future work. II Problem Statement Fig. 2: Hierarchical control framework for integrated PM planning and production scheduling with RTP-based energy costs in a make-to-order manufacturing environment. In this study, we consider a multi-stage batch manufacturing system in which raw materials progress through a network of machines and buffers. The system operates in a make-to-order (MTO) supply chain with known daily customer orders [ 25 ] . Machines undergo progressive degradation: as health declines, effective processing capacity and energy efficiency decrease. To preserve reliability, PM is employed. While maintenance restores health, it requires downtime that temporarily halts production. Energy costs for processing are charged at the RTP provided by the utility company. RTP programs generally include two profiles: a day-ahead forecast (RTP est ), released 24 hours in advance for assisting end-users’ energy management, and an actual real-time price (RTP act ), updated hourly to determine utility charges [ 16 ] . The offline PM planning uses the RTP est and the online production schedule responding to the RTP act . The objective is to determine a PM plan and production schedules that (1) meet customer orders on time, (2) maintain machine reliability, and (3) minimize total energy costs. To focus on the key decision aspects, we adopt the following modeling assumptions. (1) Raw materials are continuously available. In MTO settings, procurement/preparation occurs based on confirmed orders. (2) Compared with processing energy, the energy use directly associated with PM is negligible and thus omitted. PM incurs fixed costs reflecting maintenance labor and the opportunity cost of lost production. (3) Energy consumption due to buffer holding is neglected, since machine processing dominates total energy use. (4) As health deteriorates, we assume effective capacity decreases, and power draw increases linearly [ 19 ] . We focus on gradual, predictable degradation and neglect sudden or random failures that may occur. Future work will relax this assumption to account for stochastic degradation. III System Models III-A Manufacturing Network Model Adapted from our prior work [ 10 ] , the manufacturing network is modeled as

Read the complete text