Observation of stable components of the sound field in Lake Kinneret using the autoproduct transform
A.L. Virovlyansky · 2026
Read Observation of stable components of the sound field in Lake Kinneret using the autoproduct transform by A.L. Virovlyansky (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-13902.txt.
Introduction
Virovlyansky analyzes broadband sound pulses recorded by a vertical array in Lake Kinneret, Israel. At most pulse frequencies the array is sparse, which limits direct reading of the field. An autoproduct transform rebuilds the signals as if sent at low frequencies, where the array is dense. The field is then mapped into a depth-angle-time space, where it proves stable against environmental change. The map matches an idealized waveguide model and can feed a neural network that locates sound sources.
Catalog record
| CREATOR | A.L. Virovlyansky |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 37663 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.13902
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Observation of stable components of the sound field in Lake Kinneret using the autoproduct transform A.L. Virovlyansky Abstract An analysis was conducted of broadband sound pulses received by a vertical array in Lake Kinneret (Israel). For most frequencies within the pulse frequency bands, the array is sparse. The application of the autoproduct transform made it possible to approximately reconstruct the signals that would be received after the emission of pulses at low frequencies for which the array is dense. Using the coherent state method developed in quantum theory, a transition has been made from representing the reconstructed field as a function of depth and time to its distribution in the ’depth-angle-time’ phase space. Due to the absence of multipath, the intensity distribution in this space should be weakly sensitive to variations in environmental parameters. In accordance with this expectation, the distribution found is close to the result of its calculation using an idealized (range-independent) waveguide model. It has been shown that this intensity distribution can be used as input data for a neural network when solving the problem of sound source localization in an underwater waveguide. In the examples considered, the neural network is trained on synthetic data, i.e., data obtained from theoretical calculations. 1 Introduction A major factor that significantly complicates the calculation of sound fields in underwater waveguides is multipath propagation [ 1 , 2 ] . It results in the field intensity within the waveguide being described by a function with numerous local extrema, which is sensitive to minor variations in the environmental parameters. Given the inevitable inaccuracies in the mathematical model of the medium, the primary task becomes the search for and analysis of those characteristics of wave fields which, even under conditions of multipath propagation, remain relatively robust to perturbations in the waveguide parameters. Well-known examples of such characteristics are the travel times of sound pulses coming via the individual ray trajectories [ 1 , 3 , 4 ] , as well as interference patterns, or striations, often seen in underwater acoustic spectrograms from broadband sources [ 1 , 5 , 6 , 7 , 8 ] . In works [ 9 , 10 ] , it was shown that the field components formed by narrow beams of rays are stable against the influence of sound speed fluctuations. The contributions of individual beams to the total field at the aperture of a receiving vertical array can be isolated using an acoustic analogue of the coherent state expansion developed in quantum theory [ 12 , 13 , 14 ] . The application of this expansion allows one to move from the traditional description of the intensity of the transient sound field on a vertical receiving aray as a function of depth and time to the distribution of intensity in the phase space ’depth – angle – time’. The field intensity at each point of this space is formed by a narrow beam of rays. It is fundamentally important that beams whose central rays arrive at the same depth form field intensities at different points in phase space, and the coherent state expansion resolves (at least partially) their contributions. This weakens the influence of multipath propagation, and therefore the intensity distribution in phase space is less sensitive to variations in medium parameters than the distribution in the ’depth – time’ plane. The possibility of adequately describing the intensity distribution in phase space using an idealized environmental model is demonstrated in Ref. [ 15 ] . This paper presents the results of processing field measurements taken at Lake Kinneret in 2019 and 2021. A monopole source emitted broadband chirp pulses, which were recorded by a vertical receiving array of 10 hydrophones spaced 3 m apart. For most of the emitted frequencies, the array was sparse. Therefore, only low-frequency components of the received signals were used in data processing. Although the sparseness of the array introduced an error, it was shown that the theoretical and experimental intensity distributions are close, and this fact can be used in solving the source localization problem. This paper presents an analysis of the same data as in [ 15 ] , performed with the same purpose of comparing the calculated and measured intensity distributions in phase space. However, an additional step is introduced here during data processing: raw signals recorded by array elements undergo a transformation called autoproduct [ 18 , 19 , 20 ] . Applying this transformation allows one to approximately reconstruct signals that would be received after emitting pulses at such low frequencies that the array is dense for them. The band of these reconstructed pulses starts at 0 Hz and includes frequencies that are absent in the spectrum of the actually emitted signals. The possibility of such a reconstruction is explained by the independence of the ray eikonals and amplitudes from frequency [ 21 ] . This issue is discussed further in the main part of the paper. The use of the autoproduct transformation improved the agreement between theory and experiment. Examples demonstrate the feasibility of using phase-space intensity distributions as input to a neural network (NN) used to solve the problem of sound source localization in a waveguide. The ability to theoretically predict intensity distributions using an existing environment model can be exploited when training NNs on synthetic data. The paper is organized as follows. Section 2 describes the experiments and the data obtained. The main provisions of the theory used in the construction of the phase space representation are outlined in Sec. 3 . Section 4 describes the autoproduct transformation. The results of data processing performed using this transformation are presented in Sec. 5 . Here, the calculated and measured distributions of the field intensity in the phase space ’depth-angle-time’ are compared. Section 6 examines examples of using the intensity distribution studied in this work as input to NN in solving a source localization problem. The results of the work are summarized in Sec. 7 . 2 Experimental data and environmental model This section briefly repeats the description of experiments in Lake Kinneret (the Sea of Galilee) given in [ 15 ] , the data from which are analyzed below. It also describes the mathematical models of the environment used for numerical simulation of the recorded sound fields. Acoustic measurements in 2019 and 2021 were carried out in the central part of the lake where the bottom is almost flat. The signals were recorded using a receiving vertical array of 10 hydrophones, and the radiation was performed by a source lowered from a drifting vessel. The Table I shows the distances from which the signals were recorded. Table 1: Observation distances Year Distances 2019 340 m, 380 m 2021 415 m, 905 m, 1445 m In 2019, at each of the indicated distances, a source located at a depth of 10 m emitted chirp pulses with a duration of 1 s in the frequency band from 300 to 3500 Hz. The receiving hydrophones covered the depth interval from 10 to 37 m with a step of 3 m. The sound speed profile measured near the receiving array is shown on the left side of Fig. 1. The dots show the depths of the receiving hydrophones. In 2021,