Millimeter Wave Readout of a Superconducting Qubit

Akash V. Dixit, Zachary L. Parrott, Dennis Chunikhin, Trevyn F. Q. Larson, Bradley Hauer, John D. Teufel · 2026

Read Millimeter Wave Readout of a Superconducting Qubit by Akash V. Dixit, Zachary L. Parrott, Dennis Chunikhin, Trevyn F. Q. Larson, Bradley Hauer, John D. Teufel (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-13837.txt.

Introduction

Dixit and co-authors read out a superconducting transmon qubit with millimeter waves instead of microwaves. Their cavity runs at 34.7 GHz while the qubit sits at 3.1 GHz, a gap of more than ten times. The wide gap blocks unwanted state flips, even under strong drives. The team drives the cavity with over 100 photons and sees no stray transitions up to 1,000 photons. Readout fidelity passes 99% without a quantum-limited amplifier.

Catalog record

CREATORAkash V. Dixit, Zachary L. Parrott, Dennis Chunikhin, Trevyn F. Q. Larson, Bradley Hauer, John D. Teufel
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE63491
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.13837

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Millimeter Wave Readout of a Superconducting Qubit Akash V. Dixit, Zachary L. Parrott, Dennis Chunikhin, Trevyn F. Q. Larson, Bradley Hauer, John D. Teufel Abstract Millimeter waves are emerging as an enabling technology for connecting and enhancing different quantum platforms such as Rydberg atoms, optomechanics, and superconducting qubits. In this work, we explore the interaction between millimeter wave photons and conventional transmon qubits, specifically for qubit readout. We study a circuit quantum electrodynamic (cQED) system consisting of a millimeter-wave cavity at ω r = 2 ​ π × 34.7 GHz \omega_{r}=2\pi\times$34.7\text{\,}\mathrm{GHz}$ and a transmon qubit at ω q = 2 ​ π × 3.1 GHz \omega_{q}=2\pi\times$3.1\text{\,}\mathrm{GHz}$ coupled at rate g = 2 ​ π × 1.3 GHz g=2\pi\times$1.3\text{\,}\mathrm{GHz}$ . With such a large detuning between cavity and qubit, ω r / ω q > 10 \omega_{r}/\omega_{q}>10 , we are able to suppress drive induced unwanted state transitions, enabling strong drives for qubit readout. We measure no resonant state transitions up to 1,000 1,000 drive photons and readout the qubit state with more than 100 100 photons to achieve a measurement fidelity greater than 99% without the aid of a quantum limited amplifier. I Introduction There are many promising platforms for quantum information sciences, each with their strengths and weaknesses. By combining various technologies, we may be able to harness the best of each. Millimeter waves are emerging as an enabling technology to connect disparate quantum platforms such as circuit optomechanics, Rydberg atoms, and superconducting qubits. We envision a hybrid quantum system with capabilities such as state preparation and measurement from superconducting qubits, information storage from circuit optomechanics, and long range communication from optical transitions inherent to Rydberg atoms. Additionally, millimeter waves may unlock new frontiers for each of these individual quantum technologies 30 ; 26 ; 2 ; 3 . In this work we aim to extend the toolbox of circuit QED into the millimeter wave range. This platform will allow us to study the interactions between conventional transmon qubits and highly detuned photons, which could lead to applications in quantum memories, error correction, and metrology at millimeter wave frequencies 18 ; 51 ; 35 . We explore how millimeter waves interact with conventional superconducting transmon qubits and demonstrate that millimeter waves provide protection against unwanted state transitions, a significant source of qubit readout error. We study a typical circuit QED system consisting of a transmon qubit and a readout resonator 29 . Transmon qubits, usually in the frequency range of 36\text{\,}\mathrm{GHz} , are typically read out using resonators in the 610\text{\,}\mathrm{GHz} range. However, when the transmon and drive frequencies are of the same order of magnitude, we can encounter various unwanted resonant transitions of the transmon state 47 ; 49 ; 27 ; 15 ; 19 ; 41 ; 55 ; 57 ; 17 ; 34 . To mitigate these processes, we keep the transmon in the conventional frequency range while increasing the frequency of the readout resonator to the millimeter wave range (above 30\text{\,}\mathrm{GHz} ). We use the fundamental mode of a 3D cavity to host millimeter wave photons that interact with a transmon qubit, as shown in Figure 1 (a) 43 . With this system, we explore how millimeter waves may provide a route for improved qubit readout and establish millimeter wave photons as an important resource for superconducting quantum systems. Figure 1: Circuit QED system with the transmon operating in the microwave frequency range and the readout resonator in the millimeter wave frequency range. (a) Transmon qubit coupled to electric field of millimeter wave frequency 3D cavity mode. The amplitude and direction of the simulated electric field are indicated by the size and orientation of the displayed arrows. (b) Optical micrograph of the transmon qubit used in this work. (c) The readout mode is implemented as the fundamental mode of a 3D cavity machined out of 6061 Al. The transmon is fabricated on a sapphire substrate with Al paddles and a Josephson junction (supplemental section SII ). (d) The readout mode and transmon are capacitively coupled at rate g=2\pi\times$1.3\text{\,}\mathrm{GHz}$ . II Numerical Simulations Figure 2: Floquet simulation of a charge driven transmon for varying drive frequency \omega_{d} and normalized strength \xi^{2} averaged over possible values of gate charge. The transmon’s deviation from its ideal displaced state is shown for initial states \left|0\right\rangle and \left|1\right\rangle (upper and lower panels respectively) over the range of typically chosen readout frequencies and extending in to the millimeter wave range. The deviation is characterized by the parameter \Theta_{i} indicating hybridization of the initial state with higher energy states of the transmon. We observe large hybridization and potential for state transition over much of the drive frequency and strength space of conventional qubit readout. With the readout drive at millimeter wave frequencies (above 30\text{\,}\mathrm{GHz} ), the simulations predict drive induced resonant state transitions are highly suppressed (See supplemental section SVIII for more details). Drive induced transitions of the transmon state can hinder the quantum nondemolition nature of the readout and limit the fidelity of state measurement. We explore readout with millimeter waves as a way to mitigate these state transitions. In Figure 2 we simulate deviations from an ideal displaced state when a transmon with frequency \omega_{q}=2\pi\times$3.083\text{\,}\mathrm{GHz}$ and anharmonicity \alpha=-2\pi\times$141\text{\,}\mathrm{MHz}$ is driven at various frequencies and strengths 56 . The deviations occur due to hybridization of the qubit states, \left|0\right\rangle and \left|1\right\rangle , with higher transmon levels, increasing the probability of a state transition. This is characterized by the parameter \Theta(\xi,\omega_{d})=1-\left|\left\langle j_{\text{Floquet}}|j_{\text{ideal}}\right\rangle\right|^{2} , where \left|j_{\text{Floquet}}\right\rangle is the final state of the transmon as identified by the Floquet analysis and \left|j_{\text{ideal}}\right\rangle is the ideal displaced state expected as a result of the drive. In the frequency range of a conventional readout, 610\text{\,}\mathrm{GHz} , we find that even for low drive strengths there are many transitions, indicated by larger hybridization, \Theta , making it difficult to avoid compromising the readout performance. These transitions correspond to resonances, at specific drive frequencies and strengths, that transfers population from the computational states of the qubit to higher energy transmon levels. Since the higher energy transmon states are highly susceptible to charge noise, the transitions can be activated over a broad range of drive frequencies and strengths, making it difficult to engineer a window free of transitions. Recent work has shown that engineering alternative coupling structures or implementing a large detuning between the readout mode and transmon can eliminate such state transitions 10 ; 31 ; 16 ; 40 ; 5 . The strategy of large detuning is motivated by the behavior of the transmon charge matrix elements, which determine the probability of drive induced state transitions. The charge matrix elements connecting the ground or first excited state to higher levels (of opposite excitation number parity) are relatively large for final states bound within the cosine potential of the Josephson junction but are exponentially suppressed when the final state lives outside the confines of the potential well. To avoid connecting states with high probability, we should avoid drives that match the frequencies of transitions in the potential well. For typical circuit QED experiments this can be done by operating with drive frequencies at least 10 times the ground to first excited state transition. The most common example of

Read the complete text