Quantum electrometry in a silicon carbide power device
Yuichi Yamazaki 1, Akira Kiyoi 2, Naoyuki Kawabata 2, Yuki Watanabe 2, Ryosuke Akashi 1, Shunsuke Daimon 1, Nobumasa Miyawaki 1, Yu-ichiro Matsushita 1,3,4, Makoto Kohda 1,5,6, Takeshi Ohshima 1,5 · 2026
Read Quantum electrometry in a silicon carbide power device by Yuichi Yamazaki 1, Akira Kiyoi 2, Naoyuki Kawabata 2, Yuki Watanabe 2, Ryosuke Akashi 1, Shunsuke Daimon 1, Nobumasa Miyawaki 1, Yu-ichiro Matsushita 1,3,4, Makoto Kohda 1,5,6, Takeshi Ohshima 1,5 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-13836.txt.
Introduction
Yamazaki and co-authors show that silicon vacancies in silicon carbide can sense electric fields inside power devices. High fields drive device failure, yet no tool could map them at fine scale before. The vacancy responds equally to field parts along and across the crystal axis, a trait no other quantum sensor shares. That response lets it read fields in any direction. The team detects fields near 2.3 megavolts per centimeter, about 90% of the breakdown field, and maps their spread.
Catalog record
| CREATOR | Yuichi Yamazaki 1, Akira Kiyoi 2, Naoyuki Kawabata 2, Yuki Watanabe 2, Ryosuke Akashi 1, Shunsuke Daimon 1, Nobumasa Miyawaki 1, Yu-ichiro Matsushita 1,3,4, Makoto Kohda 1,5,6, Takeshi Ohshima 1,5 |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 54151 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.13836
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Quantum electrometry in a silicon carbide power device Yuichi Yamazaki 1, Akira Kiyoi 2, Naoyuki Kawabata 2, Yuki Watanabe 2, Ryosuke Akashi 1, Shunsuke Daimon 1, Nobumasa Miyawaki 1, Yu-ichiro Matsushita 1,3,4, Makoto Kohda 1,5,6, Takeshi Ohshima 1,5 Abstract For high-bias operation devices such as silicon carbide (SiC) power devices, early detection of failure mechanisms is essential to ensure reliability. This requires a method to map high electric fields with high spatial resolution, which has not been realized until now. Here we report that the silicon vacancy (V Si ) in SiC has outstanding characteristics for detecting electric fields applied in various directions within a high-biased SiC device. V Si exhibits an equivalent response to electric field components parallel ( E || ) and perpendicular ( E ⊥ \bot ) to the c -axis, a feature unique among quantum sensors, and the responsiveness to E || and E ⊥ \bot enables detection of arbitrary electric fields encountered in cutting-edge SiC power devices. We confirmed high electric field detection of ∼ \sim 2.3 MV/cm, which is ∼ \sim 90% of the breakdown electric field of a 4H-SiC with typical carrier concentration. Selectively formed V Si enables high-resolution mapping of electric field distribution. V Si -based quantum sensors bring data-driven research and development methodologies as well as device degradation diagnosis. Introduction The rapid adoption of artificial-intelligence technologies and electric-vehicle platforms has resulted in an unprecedented rise in electrical power consumption, thereby elevating power device performance to a critical bottleneck in modern energy-conversion systems. Silicon carbide (SiC) has emerged as a leading material for advanced power electronics offering higher efficiency, greater thermal conductivity, and higher voltage operation 24 . The reliability of such high-biased devices depends on the early detection of failure mechanisms such as hot-spot formation, premature breakdown, and trap-induced leakage, all of which manifest as localized distortions of the internal electric field distribution 42 ; 3 . Therefore, high-resolution mapping of the electric field inside a working device would provide a powerful diagnostic tool and a pathway to improve device design. Conventional probing techniques, such as Kelvin probe force microscopy 12 , differential phase contrast scanning transmission electron microscopy 47 ; 20 and nonlinear optical approaches 9 ; 7 , suffer from issues such as macroscopic spatial averaging, invasive contact requirements, and limitations in sensitivity to nanoscale electric field gradients preceding catastrophic failure. Quantum sensors based on point-defect spins in wide-bandgap semiconductors (spin defects) 17 ; 37 ; 51 ; 8 ; 16 ; 38 , which can measure various physical quantities such as a magnetic field, an electric field, and temperature with high sensitivity and high spatial resolution 36 ; 2 ; 48 ; 19 ; 10 ; 22 ; 54 , have recently emerged as a promising solution to these limitations. Optically addressable spin defects such as divacancy (V Si V C ) and silicon vacancy (V Si ) in SiC exhibit electric-field-dependent shifts of their spin resonance frequencies via the Stark effect 11 ; 46 . By performing optically detected magnetic resonance (ODMR) measurements on these defects embedded into a device, a local electric field can be inferred with nanometre-scale spatial resolution and high sensitivity, opening the prospect of non-invasive, three-dimensional field imaging inside power devices in operando. A demonstration of electric field sensing using V Si V C has already been reported 11 . However, sensitivity of the V Si V C defect to electric fields is intrinsically anisotropic: the intrinsic axis that connects the two vacancies (the V Si -V C axis) imposes a strongly anisotropic potential on the electrons (Fig. 1a), and the Stark tensor is anisotropic, with distinct components parallel and perpendicular to the V Si -V C axis. As a result, the sensitivity to electric field components parallel and perpendicular to the V Si -V C axis differs significantly 11 . Moreover, the V Si V C requires high temperature annealing (typically > 800 ∘ C) for defect formation and reliable ODMR measurement is limited to cryogenic temperatures, which precludes straightforward integration with power devices. In contrast, V Si possesses an intrinsically more isotropic electrostatic environment. The vacancy, though under weak uniaxial field by the 4H stacking, is surrounded by four carbon atoms arranged in the tetrahedral coordination as shown in Fig. 1b. Consequently, V Si is expected to exhibit high sensitivity to electric field components in all spatial directions, enabling three-dimensional electric field detection. Combining this isotropy with the fact that V Si exhibits robust ODMR from room temperature to \sim 590 K 40 makes it ideally suited for in-situ diagnostics of SiC power devices. A recent proof-of-concept study has proven that a V Si -based quantum sensor can detect electric field in a working device 46 . Yet, the direction of the electric field was restricted to a single axis, which is parallel to the quantization axis of V Si ( E || ), and the measured electric field was more than an order of magnitude smaller than the typical breakdown electric field of SiC (= 2-3 MV/cm). To analyze failures on devices in practical use, the measurement technique must be able to operate under high electric fields of approximately 2 MV/cm, which are typical under normal operating conditions. Furthermore, to measure cutting-edge devices like a trench gate MOSFET and super-junction device 26 ; 49 ; 23 , which generate electric field components perpendicular to the c -axis ( E \bot ), methods capable of detecting not only E || but also E \bot are essential. In this article, we demonstrate that V Si -based quantum sensors provide a unique capability for detecting electric fields of arbitrary orientation in a high-biased SiC power device. By embedding V Si ensemble at selected positions (Fig. 1c), we first quantify the electric dipole moments parallel ( d || ) and perpendicular ( d \bot ) to the crystal c -axis, showing that the two components are of comparable magnitude, resulting in full directional sensitivity to arbitrary electric fields. This is a unique property that distinguishes V Si from other spin defects for quantum electrometry. Furthermore, we prove that the electric dipole moments remain unchanged even in the high electric field region of \sim 2.3 MV/cm, approaching 90% of the breakdown electric field of the measured sample. Selectively formed V Si dots yield high-resolution three-dimensional maps of the electric field distribution. These results confirm that V Si -based quantum electrometry can probe the full electric field regime encountered in SiC power devices with nanometre-scale spatial precision. Figure 1: Conceptual diagram of quantum electrometry in a SiC power device. a , Structure of V Si V C in 4H-SiC. This defect responds well to an electric field parallel to its defect axis. b , Structure of V Si in 4H-SiC. This defect, being a monovacancy with no defect axis, responds equally to electric fields applied both parallel and perpendicular to the quantization axis of V Si (= c -axis). c , An electric field inside a SiC device is measured with high spatial resolution using a selectively formed V Si -based quantum sensors embedded within the device. Selective formation of V Si avoids device degradation and enables electric field measurement while maintaining the device in a