Electrometry of extremely-low frequencies from kHz to sub-Hz with a Rydberg-atom sensor

Aveek Chandra 1,2 *, Narongrit Paensin 3, Rainer Dumke 1,2,4 · 2026

Read Electrometry of extremely-low frequencies from kHz to sub-Hz with a Rydberg-atom sensor by Aveek Chandra 1,2 *, Narongrit Paensin 3, Rainer Dumke 1,2,4 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-13827.txt.

Introduction

Chandra, Paensin, and Dumke show how a Rydberg-atom sensor can measure electric fields at very low frequencies, from 0.5 Hz to 10 kHz. Normal vapor cells screen out such fields, which has blocked this range until now. Their setup pairs a paraffin-coated cell with added modulation and lock-in detection, and needs no electrodes. Reported sensitivity reaches 2 microvolts per centimeter per root hertz at 1 kHz. The method opens bands from sub-ELF up through VLF for atom-based sensing.

Catalog record

CREATORAveek Chandra 1,2 *, Narongrit Paensin 3, Rainer Dumke 1,2,4
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE34623
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.13827

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Electrometry of extremely-low frequencies from kHz to sub-Hz with a Rydberg-atom sensor Aveek Chandra 1,2 *, Narongrit Paensin 3, Rainer Dumke 1,2,4 Abstract Rydberg-atom electric field sensing has shown great potential from near-DC to THz with state-of-the-art measurement metrics realized in sensitivity, phase extraction, multi-band receptivity, etc. While Rydberg-atom sensors have shown exceptional performance in the GHz regime, low-frequency operation has remained challenging because of electric-field-screening in conventional vapor cells, which suppresses externally applied fields. We overcome this limitation by combining auxiliary modulation and lock-in detection with a paraffin coated vapor cell, and demonstrate an electrode-free, wideband method for sensing frequencies, ranging from 0.5 Hz to 10 kHz. Our work extends Rydberg-atom sensor’s range to VLF, ULF, SLF, ELF and sub-ELF frequency bands. In our method, high state-of-the-art sensitivities have been achieved - 819 μ ​ V / c ​ m / Hz \mu V/cm/\sqrt{\text{Hz}} for 1 Hz, 33 μ ​ V / c ​ m / Hz \mu V/cm/\sqrt{\text{Hz}} for 10 Hz, 10 μ ​ V / c ​ m / Hz \mu V/cm/\sqrt{\text{Hz}} for 100 Hz and 2 μ ​ V / c ​ m / Hz \mu V/cm/\sqrt{\text{Hz}} for 1 kHz. Atomic sensors are central to modern science and technology because atoms of a given species are identical, defect-free, and ultrasensitive to environmental changes. Rydberg atoms, with large DC polarizability and microwave-transition dipole moments, can efficiently measure electric fields over a broad frequency range. However, most demonstrations so far, including those achieving state-of-the-art sensitivities Tu2024Approaching ; Wu2025EnhancingArrays and continuous-band detection capabilities Liu2022Continuous-FrequencyCell , have been in the GHz regime, where most conventional wireless communication and sensing occur. Low-frequency electric-field sensing and communication remain valuable for unique applications. Low-frequency signals are highly penetrating and therefore important for long-range communication, as these wavelengths can propagate over long distances without attenuation, interference, or signal loss. Conventional low-frequency receivers, however, are bulky and noise limited because antenna size scales inversely with detection frequency, as given by the Chu limit Chu1948PhysicalAntennas . Thus, antennas are typically meter-scale at MHz frequencies and several kilometers at kHz frequencies, making them impractical or unrealizable. Developing low-frequency quantum sensors or receivers that outperform classical receivers is therefore important. Frequencies in the kHz range are used for underwater-to-air communication because they can penetrate seawater Latypov2022CompactCommunication . Low frequencies also enable tracking and localization of buried subsea cables Szy2019subsea-cables , and noninvasive testing and characterization of electronic devices and industrial units, as shown for lithium-ion batteries Barai2019ACells . Other applications include studies of electric-field pulsations below 1 Hz and turbulence in atmospheric science Anisimov2002UniversalAtmosphere , low-frequency radio astronomy Bentum2020AAstronomy , and electromagnetic fields in geophysical Lseth2006Low-frequencyDiffusion and biological Tian2023System-levelReview systems. A Rydberg-atom sensor is typically a few centimeters long and can detect electric fields with high accuracy and sensitivity from near-DC to THz frequencies. This wideband capability makes it a practical, field-deployable receiver for RF signals across multiple bands in classical wireless communication and sensing Gong2024RydbergSensing . For example, radar remote sensing of Earth’s ecosystem, climate, and surface requires detection across multiple bands in different frequency domains. Conventionally, this requires several receivers and electronic systems, each optimized for only a narrow frequency window. A Rydberg-atom sensor could instead receive multiple bands at different frequencies, shrinking and simplifying cumbersome multi-receiver architectures. Remote sensing of soil moisture with a Rydberg-atom sensor has been demonstrated in Ref. [ Arumugam2024remotesens ]. Figure 1: a) Experimental setup. Probe (852 nm) and coupling (510 nm) beams with effective Rabi frequencies \Omega_{\text{p}} and \Omega_{\text{c}} overlap in a paraffin-coated vapor cell to create two-photon Rydberg excitations to 60D_{5/2} . A balanced photodetector measures the transmission difference between the probe and an identical reference beam. Auxiliary modulation and signal fields are applied via copper plate pairs, and the lock-in amplifier provides a filtered, demodulated high-SNR output. b) Energy-level diagram for excitation to 60D_{5/2} . In an electric field, the state splits into m_{j} sub-levels. Low-frequency electric-field sensing is challenging because standard uncoated vapor cells screen DC and low-frequency fields. Although most alkali-metal atoms remain in the gas phase, a fraction adsorbs on the inner SiO 2 glass surface, forming a thin metallic layer that makes the surface conductive. When a DC or low-frequency field is applied, free charges in this layer redistribute to generate an opposing field that cancels the applied field. In steady state, the net field inside the cell is therefore zero, so the vapor cell behaves as a ‘Faraday cage’ for DC and low-frequency fields, making their detection impossible. Ref. [ Jau2020Vapor-Cell-BasedKHz ] demonstrated low-frequency detection \lesssim 1 kHz with a sapphire vapor cell, but sensing was limited by a high spectral noise floor. Other studies Li2023SuperAtoms ; Lei2024HighSensor ; Chen25VLF achieved low-frequency electric-field detection down to about a hundred hertz by inserting metal electrodes into the vapor cell, but this complicates the sensor design and can reduce sensitivity and performance. In this paper, we demonstrate an electrode-free method of sensing extremely-low frequency electric fields ranging from 0.5 Hz to 30 kHz, covering sub-ELF, ELF, SLF, ULF and VLF frequency bands. The sensing of all frequencies under same operating condition, underlines the wideband sensing capability. By using a paraffin-coated cell, an auxiliary modulation field and lock-in detection technique, high sensitivities have been measured as reported in Table 1 . Table 1: Measured sensitivities at various frequencies in this work. Frequency (Hz) Sensitivity ( \mu\text{V/cm}/\sqrt{\text{Hz}} ) 0.5 2636 1 819 2 395 5 82 10 33 20 17 100 10 200 5 1000 2 10000 5 The experimental schematic and the relevant energy levels of a Cs atom are presented in Fig. 1 (a) and (b) respectively. We have used a spherical paraffin-coated vapor cell (pyrex) at room temperature in the experiment, the relevant details of the cell can be found in Ref. [ Crepaz2015 ]. A probe laser at 852 nm, out-coupled from a polarization-maintaining fiber, is collimated and split into two beams - a probe beam with waist 0.26 mm and an identical reference beam. They propagate in parallel through the cell and finally collected on a balanced photodetector (PD) where the probe signal is subtracted from that of reference to obtain the transmission signal. A coupling laser at 510 nm, out-coupled from a polarization-maintaining fiber, is collimated to a beam waist of 0.45 mm. It counter-propagates and overlaps with the probe beam inside the vapor cell. Both probe and coupling beams have collinear polarization along the y-axis. The probe laser drives the D2 transition of Cs represented as 6\ket{S_{1/2}}\rightarrow 6\ket{P_{3/2}} with effective Rabi frequency \Omega_{\text{p}}=2\pi\crossproduct 29.5 MHz (optical power \sim 200 \mu W). The coupling laser drives the Rydberg excitation to n=60 represented as 6\ket{P_{3/2}}\rightarrow 60\ket{D_{5/2}} with effective Rabi frequency \Omega_{\text{c}}=2\pi\crossproduct 1.7 MHz (optical power \sim 42 mW). Under two-photon resonance, Rydberg-EIT transparency peak appears in the transmission signal when the probe frequency is scanned over resonance. A balanced detection mode is used to remove the Doppler-broadened absorption background, and also to cancel out any intensity noise of the probe laser. In the experiment, both probe and coupling lasers are frequency-locked to a reference cavity - a dual-axis, cubic, ultra-low expansion (ULE) cavity, with very high-finesse. The details on the setup and laser-locking methods can be found in S1 in Ref. [

Read the complete text