Topological electric field-defined quantum dots in bilayer graphene: An atomistic approach

W. Jaskólski · 2026

Read Topological electric field-defined quantum dots in bilayer graphene: An atomistic approach by W. Jaskólski (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-13055.txt.

Introduction

Wlodzimierz Jaskolski studies topological bound states in electric-field quantum dots in bilayer graphene. A cross field opens a gap in the bilayer and flips sign inside a finite patch. That flip forms a domain wall with one-dimensional chiral bands along it. Finite dot size quantizes the bands into discrete states at the boundary. Rectangular dots in armchair and zigzag cuts are compared. An atomistic tight-binding model reveals valley mixing and asymmetry effects past continuum views.

Catalog record

CREATORW. Jaskólski
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE20849
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.13055

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Topological electric field-defined quantum dots in bilayer graphene: An atomistic approach W. Jaskólski Abstract We study topological bound states in quantum dots defined by an electric field in bilayer graphene. An external field is perpendicular to the bilayer, and changes sign in a finite region that defines the quantum dot. The electric field opens a gap in the bilayer graphene and the reversed field creates a domain wall with one-dimensional chiral gapless bands localized therein. The finite size of dots leads to the quantization of these bands and the appearance of discrete bound states localized at the dot boundary. We consider rectangular dots oriented along the armchair and zigzag directions. We go beyond a simple continuum one-valley model and use an atomistic tight-binding approach. This allows us to identify new effects related to the atomic structure of graphene, strengths of the electric field, valley mixing, and valley asymmetry. I Introduction and model description There has been a series of theoretical works over the last few years devoted to the study of the energy structure of electric field-defined topological quantum dots in bilayer graphene (BLG QD) QD_PRB_2021 ; QD_NJP_2022 ; QD_PSS_2022 . On the one hand, they respond to the significant progress that has been made recently in the experimental realization and manipulation of various BLG QDs Eich_PRX_2018 ; Kurzman_PRL_2019 ; Banszerus_NL_2020 ; Ge_NL_2020 ; Banszerus_PRB_2021 ; Eich_NL_2018 ; Banszerus_NL_2020_2 ; Clerico_SR_2019 . On the other hand, they are part of the growing interest in graphene-based zero-dimensional structures due to their potential applications in e.g., quantum information processing Peeters_NL_2007 ; Chico_PRB_2010 ; Peeters_PRB_2015 ; Recher_PRB_2009 ; Recher_Nanotechnology_2010 ; Allen_NC_2012 ; Potasz_NL_2015 ; Peeters_PRB_2016 ; Kurzman_NL_2019 ; Wang_Nanotenology_2021 ; Garreis_NPhys_2024 ; Sadecka_NL_2023 ; Korkusinski_NL_2023 . A perpendicular electric field applied to the Bernal-stacked bilayer graphene opens a tunable energy gap. A spatially varying field can confine electrons in finite regions of the BLG. The most intriguing configuration is when the field changes only the sign in different regions. In such a case, a domain wall is formed between the regions, at which one-dimensional (1D) chiral gapless modes are localized Martin_PRL_2008 . When the region where the field changes its polarization is finite, the 1D modes discretize to a series of bound states localized at the edge of the region. They are called topologically confined states. The cited works QD_PRB_2021 ; QD_NJP_2022 ; QD_PSS_2022 , although using only simple one-valley continuum approximations, are the first to calculate these states for various electrically defined quantum dots in the BLG. However, the continuum models do not take into account the atomic and periodic structure of the BLG, do not recognize different directions in graphene, are mostly limited to weak fields, and cannot account for possible valley interaction. This paper aims to go a step forward to fill this gap and calculate the energy structure of electrically defined rectangular BLG QDs, as schematically visualized in Fig. 1 (a), in an atomistic tight-binding approach (TB). To investigate the influence of the BLG atomic structure on the edge-confined states in electrically defined QDs, we perform calculations for rectangular dots oriented in the armchair and zigzag directions. This is, however, challenging, since electrically defined BLG QDs of \sim 50 nanometers in size would require performing calculations on systems comprising almost half a million atoms. To address this challenge, we simplify the model and begin by examining two parallel electric-field domain walls (EFWs) created by reversing the electric field twice, as shown schematically in Fig. 1 (b). First, infinite-length domain walls with one-dimensional topological bands localized at the walls are considered. Then, walls of finite length are taken into account, which lead to band discretization and the formation of topologically confined bound states. The parallel walls act as opposite sides of the rectangular QD. The 1D topological bands localized at perpendicular sides of the QD discretize independently, which simplifies the calculations. The TB calculations reveal several new effects that are not accessible in simpler models. We find that the bound states localized at the zigzag edges are affected by the cone asymmetry. This makes them behave differently from the states localized at the armchair edges, as the dot size increases. We also show that on the zigzag edges, bound states with energies independent of the QD size can additionally appear. Figure 1: Schematic representations of electrically defined rectangle BLG QD (a) and a system of two parallel EFWs separated by d (b). The dot is defined as a region in gated BLG, where the voltages \pm V applied to the layers (red and blue) are reversed. II Computational method The Hamiltonian in the \pi -electron tight-binding approximation that we use in calculations is H=t_{i/e}{\sum_{\left\langle i,j\right\rangle}{c_{i}^{\dagger}c_{j}}}+{\rm{H.c}} where c_{i}^{\dagger},\left(c_{i}\right) are the creation and (annihilation) operators at the site i and the symbol \left\langle i,j\right\rangle restricts summation to the nearest neighbors. We use standard intra-layer and inter-layer hopping parameters t_{i}=2.7\, eV and t_{e}=0.27\, eV, respectively WJ_2D_Materials_2018 ; WJ_Materials_2025 . The boundary conditions (BC) applied in the calculations for different structures are discussed in the sections where the results are presented. The perpendicular electric field is considered by adding gate voltages \pm V to the upper and lower BLG layers. The calculations are performed for two different gates, V=\pm 0.1\, V and V=\pm 0.5\, V. In the first case, the voltage applied between the layers is smaller than the interlayer interaction energy t_{e} , while in the second case it is larger. This choice is dictated by previously observed gate control of the layer localization of gapless states at domain walls formed by the stacking order change in multilayer graphene WJ_2D_Materials_2018 ; WJ_TLG_PRB_2020 . It may influence band crossing in the case of two parallel domain walls. Since the aim of this work is to show that the atomistic approach yields some new results compared to continuum one-valley approximations, the domain walls are, for simplicity, formed by a simple sign reversal of the voltage applied. III Results and discussion III.1 Two parallel EFWs First, we investigate the system of two parallel EFWs, as schematically shown in Fig. 1 (b). The domain walls can extend along the armchair or zigzag direction and are separated by a distance d measured in the number of unit cells in a given direction. The unit cells contain eight carbon atoms (four in each layer). The length of unit cells in the zigzag and armchair directions is a_{z}=\sqrt{3}a_{C-C} and a_{a}=3a_{C-C} , respectively, where a_{C-C} is the distance between two carbon atoms in a layer. To calculate the energy bands of such systems, we must impose boundary conditions away from the domain walls. The BCs can be open (the edges in x -direction of the entire system shown in Fig. 1 (b) not connected) or closed (the edges connected). We choose the size of the system in the direction perpendicular to EFWs, large enough to ensure that the results are practically independent of the size and BC. In the case of EFWs in the zigzag direction, we use closed BC to get rid of zigzag edge states. Figure 2: Energy bands close to \Gamma ( k=0 ) for two parallel EFWs along the armchair direction. In (a) and (c), the walls are separated by 140 unit cells; in (b) and (d),

Read the complete text