Efficient Scattering Synthesis for Beyond-Diagonal Non-Local RISs Coupled with Passive Load Networks
Sravan Kumar Reddy Vuyyuru, Francisco S. Cuesta, Viktar S. Asadchy, Sergei A. Tretyakov, Do-Hoon Kwon · 2026
Read Efficient Scattering Synthesis for Beyond-Diagonal Non-Local RISs Coupled with Passive Load Networks by Sravan Kumar Reddy Vuyyuru, Francisco S. Cuesta, Viktar S. Asadchy, Sergei A. Tretyakov, Do-Hoon Kwon (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-12815.txt.
Introduction
Sravan Vuyyuru and co-authors design beyond-diagonal reconfigurable surfaces with directly tunable non-local response. Strong non-locality once needed dense subwavelength structuring with diagonal loads, which left little control. Their co-simulation joins antenna characterization with circuit models of cascaded load networks. Loads become non-diagonal, which adds design freedom. Wide-angle anomalous reflectors built this way reach far higher reflection efficiency at the same element density. Or, for a set target, far fewer elements are needed.
Catalog record
| CREATOR | Sravan Kumar Reddy Vuyyuru, Francisco S. Cuesta, Viktar S. Asadchy, Sergei A. Tretyakov, Do-Hoon Kwon |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 54013 |
| LICENSE | http://creativecommons.org/licenses/by-sa/4.0/ |
| RIGHTS | CC BY SA |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.12815
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Efficient Scattering Synthesis for Beyond-Diagonal Non-Local RISs Coupled with Passive Load Networks Sravan Kumar Reddy Vuyyuru, Francisco S. Cuesta, Viktar S. Asadchy, Sergei A. Tretyakov, Do-Hoon Kwon Abstract Realizing advanced functionalities with high efficiencies via reconfigurable intelligent surfaces (RISs) and reflectarrays requires configurations with strong electromagnetic non-local responses. The traditional approach to achieving strong non-locality has relied on modeling and synthesizing RISs with diagonal load impedance matrices composed of highly dense subwavelength structuring of arrays. In such designs, non-locality is not directly tunable, thereby limiting design flexibility and operational efficiency. This work proposes a rigorous co-simulation-based design and optimization framework for beyond-diagonal RISs with directly controllable non-locality. The co-simulation approach is based on non-local load and coupling networks, integrating electromagnetic antenna characterization with circuit-level modeling of cascaded load networks. The method benefits from additional degrees of freedom by generalizing the conventional diagonal load impedance matrix to a non-diagonal form through a non-local coupling network model. Wide-angle anomalous reflectors based on finite linear and infinite periodic arrays are designed and numerically validated, demonstrating that the proposed non-local loads embedded in realistic cascaded load networks with associated circuitry achieve significantly higher reflection efficiencies than diagonal load matrices at the given element density. Alternatively, for a fixed efficiency target, the required element density can be significantly reduced for efficient synthesis of beyond-diagonal RIS without compromising the performance of wave manipulations. I Introduction To address the ever-growing demand for next-generation wireless communication systems, reconfigurable intelligent surfaces (RISs) have emerged as a pivotal technology for optimizing and structuring smart radio propagation environments [ 1 ] . An RIS is an energy-efficient scattering structure equipped with tunable load components, each independently configured to dynamically and intelligently manipulate incoming electromagnetic (EM) waves to realize desired reflection or transmission properties. One of the primary functionalities of RISs is redirecting an impinging EM wave toward a predefined, arbitrary non-specular direction via anomalous reflection. In the last decade, extensive research in high-efficiency, wide-angle anomalous reflection through EM wavefront engineering has focused on modeling and designing metasurfaces [ 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 ] , metagratings [ 17 , 18 , 19 ] and metacrystals [ 20 ] for diverse applications. Recent research is moving towards synthesizing devices for integrating multiple and reconfigurable advanced functionalities through controllable EM characteristics, such as multi-angle reflections, scanning leaky-wave antennas, and integrated sensing [ 4 , 11 ] . Conventional designs of reflectarrays and reflecting metasurfaces rely on the phased-array principle and the locally periodic approximation (LPA), where a tunable reactive load impedance controls the local reflection phase. However, phase-gradient reflectors exhibit diminished efficiencies for wide-deflection tilts, i.e., when the incidence and reflection angles deviate significantly from the conventional law of reflection. This degradation is primarily due to the wave impedance mismatch between incident and reflected waves, causing strong parasitic reflections in undesired directions [ 2 ] . This limitation necessitates non-local designs of RISs, where the performance of wavefront control of reflected waves is enhanced by properly optimizing coupling between scatterers. For these reasons, in the antenna and electromagnetics community, non-local designs of reconfigurable aperiodically loaded metasurfaces have become prevalent [ 13 , 6 , 12 , 4 , 3 , 14 , 5 , 9 , 8 , 7 , 11 ] . For instance, recent research demonstrates that non-local designs incorporating spatially varying subwavelength-sized meta-atoms can achieve nearly 100%-efficient scanning anomalous reflectors, with array scatterers modeled as impedance wires or thin strips [ 5 ] and realistic patches [ 8 , 6 , 7 ] . Furthermore, optimizing evanescent fields in finite-size arrays by inducing oscillatory current distribution in subwavelength-engineered non-local RISs enables a superdirective behavior that surpasses the conventional 100% efficiency limit of infinite arrays. This has been demonstrated both in idealized thin-wire models [ 9 , 10 ] and in practical patch-array implementations [ 11 ] . Such superdirectivity and advanced functionalities demand additional degrees of freedom for optimization of coupling between array elements, which have been conventionally achieved through deep subwavelength discretization, i.e., by increasing the number of scatterers per wavelength. However, densifying the array by reducing the element spacing introduces practical challenges, including complex layouts, fabrication constraints, scalability issues due to increased losses, strong mutual coupling, and increased calibration complexity. On the other hand, metagratings avoid the need for a subwavelength spacing but restrict continuous scanning, as their fixed periodicity enables scanning only at specific discrete angles determined by the supported Bloch harmonics for a given set of incidence and reflection angles [ 17 , 18 , 19 ] . Interestingly, recent advances in the communications community have also recognized the necessity for non-local RIS designs, introducing the concept of Beyond-Diagonal RISs (BD-RISs) [ 21 , 22 , 23 , 24 , 25 , 26 , 27 , 28 ] . In traditional communication-theory models of RIS structures, array elements are assumed to behave as individual, independently controlled scatterers, a configuration widely used in existing studies [ 29 , 1 ] . In contrast, proposed BD-RIS designs interconnect array elements through a general reconfigurable impedance load network defined by a non-diagonal load matrix, introducing controlled cross-coupling using inter-element connections [ 21 , 22 , 23 , 24 ] . This controllable mutual coupling between RIS elements can be exploited to further enhance the performance of the RIS. However, these formulations typically assume that RIS elements are electromagnetically decoupled, i.e., treated as isolated elements while neglecting mutual interactions through near fields between the array elements. In other words, most existing BD-RIS models do not account for physical EM coupling of the array elements, modeling the RIS response with an oversimplified matrix of phase shifts introduced by idealized reflecting elements. The authors in [ 25 , 26 , 27 , 28 ] proposed coupling-aware models for BD-RISs that capture mutual coupling at the system level. However, these models rely on pre-characterization of the complete communication channel and, therefore, are limited to static or quasi-static communication environments. For instance, every transmitter or receiver movement requires load recalibration, whereas the proposed antenna-based BD-RIS model enables receiver/transmitter-position-agnostic synthesis. Meanwhile, in the EM community, engineered non-local metasurfaces with spatially varying subwavelength-spaced elements [ 5 , 9 , 8 , 6 , 7 , 11 ] have focused on controlling inter-element mutual coupling by globally synthesizing the diagonal load impedances to enhance wave-matter interactions, without the need for a non-diagonal load matrix. Fig. 1: (a) 3D schematic of the multilayer BD-RIS structure composed of loaded radiating elements, illustrating plane-wave incidence at angle \theta^{\rm i} and anomalous deflection toward the desired angle \theta^{\rm r} . The lowermost plot presents the radiation characteristics, indicating improved sidelobe suppression and higher reflected-power efficiency relative to the diagonal RIS configuration. (b) A magnified, exploded view of a two-element multilayer unit cell stack-up highlighting the transmission-line-based interconnection and individually tunable loads embedded within the non-radiating tunable layer. In this paper, to overcome these limitations, we propose a strategy that fully synthesizes EM coupling of BD-RIS elements by introducing an additional non-radiating, tunable network layer beneath the ground plane, interconnecting the element ports, as illustrated in Fig. 1