Experimental aspects of the Quantum Tomography of tau lepton pairs at a Higgs factory collider
Daniel Jeans · 2026
Read Experimental aspects of the Quantum Tomography of tau lepton pairs at a Higgs factory collider by Daniel Jeans (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-12609.txt.
Introduction
Daniel Jeans examines how well tau lepton pairs at a Higgs factory collider can support quantum tomography. Spin links between the taus carry signs of entanglement, but they need full event reconstruction. His method uses particle momenta and impact parameters to rebuild each event. It yields several weighted solutions per event, from which spin directions can be drawn. Tests in ideal and realistic detectors show photon angular resolution matters most. Energy resolution and vertex performance matter far less.
Catalog record
| CREATOR | Daniel Jeans |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 34141 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.12609
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Experimental aspects of the Quantum Tomography of tau lepton pairs at a Higgs factory collider Daniel Jeans Abstract Quantum Tomography of tau lepton pairs produced at a Higgs Factory collider will enable measurements of their spin correlations arising from quantum entanglement. Such measurements rely on the ability to measure the components of and correlations between the taus’ spins. We present a method to fully reconstruct the kinematics of tau pair events at an electron-positron Higgs factory collider, making use of measured particles’ momenta and impact parameters. This procedure results in several consistent solutions per event, which can be assigned weights according to various event properties. Full kinematic reconstruction allows the optimal extraction of the taus’ spin orientation via polarimeters. We estimate the precision with which polarimeters can be reconstructed in an ideal detector, and quantify the effects of more realistic detector performance. We conclude that for this analysis, achieving a photon angular resolution of around 1 mrad is the most crucial aspect of detector performance, while photon energy resolution and vertex detector performance are significantly less important. keywords Higgs Factory, tau lepton, Quantum Tomography 1 Introduction The process e^{+}e^{-}\to\tau^{+}\tau^{-}(\gamma) is a fundamental reaction in electron-positron colliders. A future electron-positron Higgs Factory collider, such as the proposed International Linear Collider (ILC) Behnke et al. 2013 , Linear Collider Facility Abramowicz et al. 2025 , Compact Linear Collider Adli et al. 2025 , Future Circular Collider Benedikt et al. 2025 , and Circular Electron Positron Collider Abdallah et al. 2024 projects, will produce such events at higher energies and with larger statistics than before. The prompt decay of taus brings sensitivity to their spin orientation via the distribution of their decay products. This allows measurements of e.g. the longitudinal tau polarisation see e.g. Abreu et al. 2000 ; Abdallah et al. 2008 ; Yumino and Jeans 2022 , which in turn provides sensitivity to the fundamental Electro-Weak parameter \sin\theta_{W} . Recently, there is much interest in the measurement of entangled quantum states at colliders Fabbrichesi et al. 2023 ; Ehatäht et al. 2024 ; Fabbrichesi and Marzola 2024 ; Altakach et al. 2026 ; Guo et al. 2026 ; Ma and Li 2024 ; Lo Chiatto 2025 ; Han et al. 2025 . e^{+}e^{-}\to\tau^{+}\tau^{-} is a suitable system in which to make such measurements, thanks to the ability to reconstruct the spins of the two co-produced taus. In this paper, we discuss various experimental aspects of the Quantum Tomography, i.e. the reconstruction of tau spin information, of the process e^{+}e^{-}\to\tau^{+}\tau^{-}(\gamma) . Section 2 describes a method to reconstruct kinematic information from the available measurements. We present results assuming a detector with perfect performance at a 250 \mathrm{GeV} ILC in Sec. 3 , and the extraction of spin information is discussed in Sec. 4 . Section 5 describes the use of fast simulation of the International Large Detector (ILD) Collaboration 2020 to investigate the effects of varying the resolution of key detector components. 2 Kinematic reconstruction The kinematic reconstruction of e^{+}e^{-}\to\tau^{+}\tau^{-}(\gamma) presents several challenges. The final state contains several undetectable particles: the neutrinos produced in the \tau decay – two per \tau for leptonic and one for semi-leptonic decays, and often initial state radiation (ISR) collinear to the beams. Optimal reconstruction of spin information in \tau decays requires knowledge of all its daughter particle momenta, including the neutrinos. Compared to our previous analysis of tau reconstruction in e^{+}e^{-}\to\mu^{+}\mu^{-}\tau^{+}\tau^{-}(\gamma) ( e.g. via e^{+}e^{-}\to ZH ) Jeans 2016 ; Jeans and Wilson 2018 , the current process is less constrained due the absence of an independent measurement of the interaction point (IP) provided by the two muons. Whereas the previous approach considered only the transverse momentum balance in an event, thereby rendering it insensitive to the emission of collinear ISR, in this case we must explicitly consider ISR. We restrict ourselves to events in which both taus decay semi-leptonically. This subsample of events is a more tractable system, containing only two neutrinos per event. The spin sensitivity in semi-leptonic decays is significantly larger than that of leptonic decays, due to the presence of two neutrinos in the latter. The sensitivity is in principle uniform amongst semi-leptonic decay channels, provided the form of the hadronic current is known. The hadronic current, a function of the momenta of tau decay daughters, can be used to extract the polarimeter, an optimal estimator of the spin orientation. We consider tau decays to \pi^{\pm}\nu , \pi^{\pm}\pi^{0}\nu , \pi^{\pm}\pi^{0}\pi^{0}\nu , and \pi^{\pm}\pi^{\pm}\pi^{\mp}\nu , respectively accounting for 10.8%, 25.5%, 9.3% and 9.3% of tau decays, for which optimal polarimeters can relatively easily be calculated. The energy of the tau decay products in these decays is shown in Fig. 1 . Figure 1: Distribution of pion and photon energies in the considered decay modes (right) at 250 \mathrm{GeV} ILC. The visible products of these tau decay modes ideally consist of only charged pions and photons (from either neutral pion decay or visible ISR). The photons are reconstructed as clusters within the electromagnetic calorimeter, allowing an estimate of their energy and direction. The momentum of charged pions is measured in the tracking detector, typically placed within a solenoidal magnetic field. Since the tau has a mean flight distance of a few mm ( \beta\gamma c\tau\sim 5\textrm{mm} for a 100 \mathrm{GeV} tau), the charged pion trajectories are typically significantly displaced from the interaction point (IP). The experiment’s vertex detector can measure the pion’s trajectory with a precision of a few microns in the vicinity of the IP. Since all charged particles produced in the event are displaced, no direct measurement of the IP position is available, beyond knowledge of the envelope of the collider’s luminous region. The centre-of-mass (CoM) energy is quite precisely known at an electron-positron collider, however a complication that cannot be ignored is ISR, in which one or both of the initial e^{+}e^{-} radiates a photon before the hard collision. This photon is preferentially emitted in the beam direction, and therefore often escapes detection, passing through the outgoing beampipe. The effect of ISR on the invariant mass of the tau pair is demonstrated in Fig. 2 , which shows that this mass is significantly less than the nominal CoM energy for the majority of events. The radiative return to the Z boson mass is clearly seen. Figure 2: Simulated distribution of the \tau^{-}\tau^{+} invariant mass at 250 \mathrm{GeV} ILC. The tau mass m_{\tau} , while not directly observable due to its decay into at least one neutrino, can be used as a constraint on the event kinematics. Since m_{\tau} is much smaller than the typical tau energy \mathcal{O}(100)~\mathrm{GeV} , we may expect that such constraints are rather sensitive to even small mis-measurements of particle energies and directions as well as to variations in the initial conditions due to e.g. beam energy spread. In the following we outline a method to reconstruct the full kinematics of e^{+}e^{-}\to\tau^{+}\tau^{-}(\gamma) events, taking the above considerations into account. Non-tau objects In general, there may be visible activity from the hard event which is not associated with the tau-tau system, for example visible ISR photons. We define its 4-momentum in the laboratory (LAB) frame as p_{OTHER} . It is likely that ISR may have been emitted from one