Advanced architectures for coupling III-V nanowires to photonic integrated circuitry

Edith Yeung, Kataryna Sorensen, David B. Northeast, Maziyar Milanizadeh, Philip J. Poole, Robin L. Williams, Dan Dalacu · 2026

Read Advanced architectures for coupling III-V nanowires to photonic integrated circuitry by Edith Yeung, Kataryna Sorensen, David B. Northeast, Maziyar Milanizadeh, Philip J. Poole, Robin L. Williams, Dan Dalacu (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-12443.txt.

Introduction

Yeung and co-authors couple III-V nanowire quantum dots to photonic circuits with a curved waveguide bridge. A dot inside a nanowire spans a gap in the waveguide, which is not continuous across the device. Evanescent coupling between the photonic parts recovers photons emitted from both outputs. Auto- and cross-correlation tests ran on distinct output facets of the device. Single-photon emission came from both ends for neutral and charged exciton complexes. Cascaded emission was also shown, with each complex collected from a distinct facet.

Catalog record

CREATOREdith Yeung, Kataryna Sorensen, David B. Northeast, Maziyar Milanizadeh, Philip J. Poole, Robin L. Williams, Dan Dalacu
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE28027
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.12443

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Advanced architectures for coupling III-V nanowires to photonic integrated circuitry Edith Yeung, Kataryna Sorensen, David B. Northeast, Maziyar Milanizadeh, Philip J. Poole, Robin L. Williams, Dan Dalacu Abstract This work implements a hybrid device based on a semiconductor quantum dot embedded within a nanowire to bridge a non-continuous curved waveguide structure. The geometry takes advantage of evanescent coupling between the photonic structures to recover single photons emitted from both outputs of the device. Auto- and cross-correlation measurements were performed on different output facets of the device. We demonstrate single-photon emission from both ends of the nanowire for both neutral, X X and X ​ X XX , and charged X − X^{-} , excitonic complexes. We further demonstrate the cascaded X ​ X − X XX-X emission by collecting each complex from a different facet. This work lays the foundation for on-chip architectures which utilize multi-directional integration of quantum emitters. I Introduction Sources of single-photons are a key resource in quantum information processing applications O’Brien et al. 2009 and solid-state two-level systems Aharonovich et al. 2016 offer a promising route to generating single-photons on-demand with high efficiency. Semiconductor quantum dots (QDs) are of particular relevance as they have achieved nearly ideal performance when integrated with photonic structures Senellart et al. 2017 . These structures, however, are typically designed to operate out-of-plane whereas future applications will likely require the scalability provided by on-chip integration Hepp et al. 2019 . QDs embedded within nanowires that are grown Dalacu et al. 2011 (i.e. bottom-up) as opposed to etched Claudon et al. 2010 (i.e. top-down) provide a route to fabricating sources of single photons deterministically. The number of emitters per device is controlled and each device is grown at a specified position on the substrate. Bottom-up nanowire QDs have been used to generate both high quality single photons Dalacu et al. 2012 ; Laferrière et al. 2022 and high fidelity entangled photon pairs Versteegh et al. 2014 ; Pennacchietti et al. 2024 . These sources were also operated out-of-plane and high efficiency was obtained by designing the nanowire to act as a single mode waveguide supporting only the fundamental HE 11 mode Dalacu et al. 2019 , and by introducing a taper along the length of the nanowire Dalacu et al. 2021 to expand the mode for efficient coupling to external optics. Properly designed, 95% of the dot emission is directed into the HE 11 mode Dalacu et al. 2019 which can be coupled to single mode fibre with an efficiency of 93% Bulgarini et al. 2014 . The ability to control the nanowire taper is also relevant for designing chip-integrated sources. In this case, the mode expansion provided by the taper is not for efficient coupling to low numerical aperture optics, but rather for efficient evanescent coupling to on-chip waveguides. By placing an appropriately tapered nanowire along a straight Si 3 N 4 waveguide, as in Fig. 1 (a), the HE 11 mode can be efficiently coupled on-chip, with simulated coupling efficiencies approaching 100% Mnaymneh et al. 2020 ; Yeung et al. 2023 . The hybrid structures can be assembled by picking up nanowires from the growth substrate and placing them on Si 3 N 4 waveguides using a scanning electron microscope (SEM)-based nanomanipulator Mnaymneh et al. 2020 . With this approach, we have demonstrated >90% coupling of the HE 11 mode to a Si 3 N 4 waveguide and have generated on-chip single photons with purities exceeding 95% Yeung et al. 2023 . Figure 1: False colour SEM images with SiO 2 in grey, Si 3 N 4 in blue and InP in purple. (a) Straight Si 3 N 4 waveguide with a tapered InP nanowire on top. (b) Curved waveguide with a nanowire on the side. (c) Segmented waveguide with a nanowire bridging the gap. (d) As in (c) but with an additional waveguide for cross-pumping. The pick and place hybrid platform is not limited to simple structures such as that shown in Fig. 1 (a): one can also construct hybrid devices consisting of a nominally untapered nanowire with a thinner diameter placed beside a curved waveguide as shown in Fig. 1 (b). In this case the quantum dot within the nanowire is located at its midpoint and the evanescent transfer of the nanowire mode to the waveguide occurs as the separation between the two increases. Such a device can harvest photons emitted in either direction along the nanowire waveguide, a limitation of the unidirectional structure in Fig. 1 (a) where emission towards the base is not efficiently collected. Expanding on the curved waveguide architecture, a gap can be introduced in the waveguide with the nanowire connecting the circuit, as shown in Fig. 1 (c). In this case, the waveguide mode can be transferred completely to the nanowire and back again, assisted by tapering each end of the segmented waveguide. This structure is relevant for new types of experiments such as transmission measurements to investigate coherent interactions between single photons and two-level systems Thyrrestrup et al. 2018 . By incorporating an additional waveguide orthogonal to the nanowire, as in Fig. 1 (d), we can also envision a resonant fluorescent excitation scheme where pump laser rejection is achieved using orthogonal excitation and collection directions Ates et al. 2009 ; Flagg et al. 2009 ; Muller et al. 2007 . In this article we explore some of the advanced architectures shown in Fig. 1 for on-chip single photon generation in Si-based integrated photonic circuitry. We evaluate, through simulations, geometry-dependent coupling efficiencies between a nanowire and a curved waveguide, both with and without a gap. We find the segmented waveguide design more robust against variations in the nanowire diameter and use this architecture to demonstrate efficient generation of on-chip high purity single photons. We further utilize the bi-directional nature of the device to perform cross-correlation measurements by collecting from both ends of the nanowire with the nanowire acting as an integrated beamsplitter. II Simulations As mentioned in the introduction, a nanowire containing a quantum emitter can transfer its light efficiently to a nearby waveguide by evanescent coupling Mnaymneh et al. 2020 ; Yeung et al. 2023 . This process is robust provided both structures allow for a single mode and a tapered section is included over sufficient length to allow adiabatic transfer of mode energy between the two. In this scenario, light that is emitted away from the taper—50% of light from the quantum dot—will encounter an abrupt end of the nanowire and will couple poorly into the waveguide. A waveguide that curves as it approaches the nanowire will be seen as a gradual change in the refractive index. Device designs can use this effect to allow for light coupling in both directions. Since quantum dot emission has a narrow bandwidth and optical response of all structures is expected to change slowly with wavelength, frequency domain finite element simulations (COMSOL Multiphysics) are performed to predict device performance. We first investigate power transfer from a dipole in a straight InP nanowire to a curved Si 3 N 4 waveguide. A 20 \mu m nanowire length is used in order to provide sufficient separation between the nanowire ends and the curved waveguide for a waveguide with

Read the complete text