Push, Press, Slide: Mode-Aware Planar Contact Manipulation via Reduced-Order Models

Melih Özcan, Umut Orguner, Ozgur S. Oguz · 2026

Read Push, Press, Slide: Mode-Aware Planar Contact Manipulation via Reduced-Order Models by Melih Özcan, Umut Orguner, Ozgur S. Oguz (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-12399.txt.

Introduction

Özcan, Orguner, and Oguz plan pushing and press-and-slide moves with mode-aware reduced-order models. Planar contact tasks mix hybrid mechanics, under-actuation, and asymmetric friction. Their core move is to abstract wrench-twist limit surfaces into a small library of intuitive models. Single-arm and bimanual contact topologies map to simple forms, like a unicycle for press-and-slide. Trajectory generation anchors to those models, then an algebraic allocator splits feasible contact forces. Simulations across one- and two-arm tasks run fast with no optimization loop.

Catalog record

CREATORMelih Özcan, Umut Orguner, Ozgur S. Oguz
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE33746
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.12399

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Push, Press, Slide: Mode-Aware Planar Contact Manipulation via Reduced-Order Models Melih Özcan, Umut Orguner, Ozgur S. Oguz Abstract Non-prehensile planar manipulation, including pushing and press-and-slide, is critical for diverse robotic tasks, but notoriously challenging due to hybrid contact mechanics, under-actuation, and asymmetric friction limits that traditionally necessitate computationally expensive iterative control. In this paper, we propose a mode-aware framework for planar manipulation with one or two robotic arms based on contact topology selection and reduced-order kinematic modeling. Our core insight is that complex wrench-twist limit surface mechanics can be abstracted into a discrete library of physically intuitive models. We systematically map various single-arm and bimanual contact topologies to simple non-holonomic formulations, e.g. unicycle for simplified press-and-slide motion. By anchoring trajectory generation to these reduced-order models, our framework computes the required object wrench and distributes feasible, friction-bounded contact forces via a direct algebraic allocator. We incorporate manipulator kinematics to ensure long-horizon feasibility and demonstrate our fast, optimization-free approach in simulation across diverse single-arm and bimanual manipulation tasks. Supplementary videos and additional information are available at https://sites.google.com/view/pushpressslide . I INTRODUCTION Non-prehensile planar manipulation is a fundamental capability for robots operating in homes, warehouses, factories, and service environments. In many practical situations, a robot must move an object without forming a stable grasp: the object may be too large, too heavy, poorly shaped, cluttered by surrounding items, or simply more efficiently moved by pushing or sliding than by lifting. For instance, an object can be transported and reoriented through planar contact, then used as a tool to pull or reposition other objects (Fig. 1 ). At the same time, planar contact manipulation is difficult to model, plan, and control. Consequently, pushing and press-and-slide behaviors are hybrid, underactuated, and friction-limited, making them difficult to plan globally and often expensive to control online [ 9 ] . These difficulties become more pronounced in multi-contact settings, where the robot can influence not only the net object wrench but also the effective center of pressure through the distribution of normal forces. Nevertheless, this additional authority also creates new manipulation opportunities, including tighter reorientation maneuvers, pivoting about a chosen contact region, and more controlled wall- or surface-assisted transport. Fig. 1: A single arm uses press-and-slide to transport an object, then leverages it as a tool to reposition a second object. In this paper, we argue that many practically relevant planar contact interactions admit a simpler interpretation than a fully generic hybrid contact problem. Our key idea is to organize the planar manipulation into a small set of physically meaningful contact configurations and to associate each configuration with a reduced-order motion template. Following the idea of single-arm rear pushing being modeled as a bounded-curvature car model [ 25 ] , we make a comprehensive analysis of manipulation tasks with single and bimanual arms. This perspective leads to a mode-aware pipeline: given a task, the robot selects a contact configuration, plans motion in the corresponding reduced model, recovers the required object wrench/twist, and allocates feasible forces to one or two arms under friction and unilateral constraints. For long-horizon motions, robot kinematic feasibility is incorporated into planning by optimizing robot configurations while keeping the end-effector contact pose fixed in object coordinates. TABLE I: Summary of Planar Contact Manipulation Modes and Kinematic Properties Manipulation Mode Reduced-Order Model Body-Fixed Tracking Point CoP Steering Single-Arm Rear Pushing Dubins Bicycle ✓ – Single-Arm Press-and-Slide Unicycle ✓ ✓ Parallel Bimanual Pushing Dubins Bicycle / Differential Drive ✓ – Orthogonal Bimanual Pushing Quasi-Holonomic – – Bimanual Press-and-Slide Quasi-Holonomic ✓ ✓ Contributions This paper makes the following contributions: • Body-fixed tracking point for press-and-slide: We identify a body-fixed tracking point for single-arm press-and-slide motion that is invariant to the force direction. It allows planning as a unicycle, as a car, or a forklift; spanning the whole steering regime. • Mode-aware reduced-order viewpoint: We unify common planar contact interactions under a small set of physically meaningful configurations, each admitting a simple reduced-order motion template. • Optimization-free execution: We present closed-form, optimization-free control strategies for motion planning. Extensive simulations demonstrate our method’s planning and control effectiveness. II RELATED WORK Planar contact manipulation is commonly modeled under quasi-static assumptions that map frictional wrenches to object motion. Mason formalized the mechanics of pushing and the role of contact location and friction constraints [ 14 ] . The limit surface then provided a compact representation of support friction and the coupled translation–rotation behavior in planar sliding [ 6 , 10 ] . A substantial literature treats planar pushing as an underactuated, nonholonomic system. Stable Pushing identifies stable pushing directions that keep the object fixed relative to the pusher and enables obstacle-aware planning [ 13 ] . Pushing Revisited shows that sticking pushes admit a bounded-curvature car-like abstraction and a differential-flatness view for planning and stabilization [ 25 ] . Feedback-control formulations further emphasize hybrid contact modes and friction-limited inputs in the pusher–slider [ 9 ] , motivating optimization-based controllers such as hybrid MPC for online reasoning over mode sequences [ 8 ] . Motion-cone formulations offer another compact reachability abstraction under friction [ 2 ] . Top-contact planar sliding has received comparatively less attention: Yi and Fazeli analyze top-contact sliding via asymmetric dual limit surfaces and derive goal-reaching planners under top-contact constraints [ 22 ] . Relatedly, pulling under fixed contact can exploit stabilizing behavior when the center of pressure trails the pulling direction; Huang et al. derive exact bounds under pressure uncertainty for guaranteed plans [ 11 ] . Beyond analytical pushing, surveys synthesize contact-rich manipulation methods across modeling, hybrid/dynamic control, simulation, and learning [ 19 , 17 ] . In clutter, push-grasping combines pushing with grasp planning [ 4 ] . Data-driven models have been integrated with MPC for accurate closed-loop pushing with limited data [ 7 ] , supported by large-scale datasets and probabilistic predictors of outcomes and variability [ 23 , 1 ] . Learning has also coupled pushing and grasping via multi-task and self-supervised RL [ 16 , 24 ] , and recurrent models such as Push-Net infer latent object properties from push history [ 12 ] . More broadly, contact-mode guided planning searches over hybrid contact sequences in 3D [ 3 ] , dynamic in-hand sliding incorporates inertia with limit-surface models [ 18 ] , and tool-assisted push–pull primitives enable confined manipulation [ 5 ] . Our work builds on these foundations, but rather than specializing in single primitives, we unify single and bimanual pushing and press-and-slide maneuvers into a mode-aware reduced-order framework, enabling closed-form force allocation with optional kinematic feasibility planning for long horizons. III BACKGROUND INFORMATION III-A Planar Kinematics and the Limit Surface We model planar motion under the quasi-static assumption, where frictional forces dominate inertial forces. Let the net planar wrench applied to the object be W=[F_{x},F_{y},\tau]^{\top} , and the resulting planar twist be \nu=[v_{x},v_{y},\omega]^{\top} . In quasi-static equilibrium, support friction perfectly opposes W . The boundary of frictional wrenches the contact patch can sustain is defined by the limit surface , standardly approximated as an ellipsoid: H(W)\;=\;W^{\top}A\,W\;=\;1, (1) where A is a diagonal shape matrix. For isotropic friction, A uses shape coefficients a and b : A\;=\;\mathrm{diag}(a,a,b). (2) These coefficients represent the inverse-squared semi-axis lengths of the ellipsoid: a\;=\;\frac{1}{(\mu N_{\mathrm{total}})^{2}},\qquad b\;=\;\frac{1}{(c\,r_{0}\,\mu N_{\mathrm{total}})^{2}}. (3)

Read the complete text