Emergent Anomalous Hall Effect from Surface States in the Altermagnet MnTe Thin Films
Yufei Zhao, Saswata Mandal, Chao-Xing Liu, Binghai Yan · 2026
Read Emergent Anomalous Hall Effect from Surface States in the Altermagnet MnTe Thin Films by Yufei Zhao, Saswata Mandal, Chao-Xing Liu, Binghai Yan (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-12259.txt.
Introduction
Zhao, Mandal, Liu, and Yan resolve clashing reports on the anomalous Hall effect in MnTe films. Transport tests on this altermagnet had shown opposite signs and odd thickness behavior. The team splits bulk and surface contributions for distinct crystal terminations. Bulk states host a g-wave Fermi surface, yet surface states carry ferromagnet-like spin polarization. Those surface states dominate the Hall response at the Fermi energies experiments reach. A tellurium cap can even flip the surface sign, which points to interface design as a control knob.
Catalog record
| CREATOR | Yufei Zhao, Saswata Mandal, Chao-Xing Liu, Binghai Yan |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 42676 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.12259
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Emergent Anomalous Hall Effect from Surface States in the Altermagnet MnTe Thin Films Yufei Zhao, Saswata Mandal, Chao-Xing Liu, Binghai Yan Abstract Transport measurements on thin films of the prototypical altermagnet MnTe have reported conflicting phenomena of anomalous Hall effects (AHE), including opposite signs and thickness-independent resistivity. Here we resolve these discrepancies by separating bulk and surface contributions to the AHE for different crystal terminations. Using first-principles calculations and symmetry-based effective models, we show that although the bulk hosts a characteristic g g -wave Fermi surface, surface states within the bulk gap acquire a ferromagnet-like spin polarization and dominate the AHE at experimentally relevant Fermi energies. While the surface magnetization follows the surface spin sublattice, the resulting AHE is uniquely determined by the bulk Néel order for a given termination. Both bulk and surface contributions are closely linked to a small but finite out-of-plane orbital magnetization. Incorporating realistic interfacial chemistry further reveals that a Te capping layer can reverse the surface AHE sign relative to that on an InP substrate. Our results establish a microscopic framework for interpreting and engineering AHE responses in altermagnetic thin films through interface design. I Introduction Altermagnetism refers to an unconventional collinear antiferromagnetic phase Šmejkal et al. 2020 ; Yuan et al. 2020 ; Ma et al. 2021 ; Šmejkal et al. 2022a ; Šmejkal et al. 2022b ; Song et al. 2025 ; Amin et al. 2024 ; Mazin 2022 . Despite vanishing net magnetization, it exhibits nonrelativistic band split and spin current Wu et al. 2007 ; Šmejkal et al. 2022a , and usually shows anomalous Hall effect (AHE) with spin-orbit coupling (SOC) Liu et al. 2025a , which is similar to another known Mn 3 (Sn/Ge) family of noncollinear antiferromagnets Nakatsuji et al. 2015 ; Nayak et al. 2016 ; Zelezny et al. 2017 ; Zhang et al. 2017 . In experiments, spin-split bands are typically observed as evidence of altermagnets via angle-resolved photoemission spectroscopy (ARPES) Lee et al. 2024 ; Fedchenko et al. 2024 ; Krempaskỳ et al. 2024 ; Zhu et al. 2024 ; Reimers et al. 2024 ; Zhang et al. 2025 , and the AHE serves as a transport probe of Berry curvature Gonzalez Betancourt et al. 2023 ; Zhao et al. 2025 ; Mali et al. 2025 . MnTe emerges as one of the most extensively studied altermagnet materials, owing to its high Néel temperature (310 K) and compatibility with molecular beam epitaxy thin film growth, as a promising candidate for semiconductor spintronics applications. MnTe thin films and single crystals were reported to exhibit a variety of AHE behaviors Gonzalez Betancourt et al. 2023 ; Kluczyk et al. 2024 ; Chilcote et al. 2024 ; Bey et al. 2024 ; Liu et al. 2025b ; Smolenski et al. 2025 ; Zhou et al. . A major puzzle is that the AHE sign sensitively depends on thin film samples grown on different substrates and interface conditions. For instance, MnTe films grown on InP substrate typically exhibit a positive anomalous Hall conductivity (AHC) among 50–300 K in early reports Gonzalez Betancourt et al. 2023 ; Chilcote et al. 2024 and show an AHC sign reversal from positive to negative when cooling down with the critical temperature near 175 K in a more recent work Zhou et al. . In contrast, bulk crystals show similar AHC sign reversal around 230 K where strain was believed to modify AHE Liu et al. 2025b ; Smolenski et al. 2025 . Furthermore, Zhou et al. Zhou et al. found that both the AHE and longitudinal resistance are insensitive to film thickness, raising the question whether surface or interface states govern the magneto-transport properties in these thin films, distinct from bulk crystals. Zhou et al. Zhou et al. also revealed the existence of surface states at the Fermi energy by ARPES, in addition to bulk valence bands Lee et al. 2024 ; Osumi et al. 2024 ; Krempaskỳ et al. 2024 ; Hajlaoui et al. 2024 ; Chilcote et al. 2024 lying 30 \sim 60 meV below the Fermi level. Although surface states are known to profoundly influence the electronic and transport properties of low-dimensional systems, their role in altermagnets remains largely unexplored. If surface states dominate the AHE observed in experiments, can we still gain useful insights about the bulk altermagnetism? Therefore, we are motivated to investigate surface states and focus on their interplay with the bulk altermagnetism in MnTe thin films by combining first-principles calculations and effective models in this work. Our results reveal that surface states emerge within the bulk band gap. These states harbor large Berry curvature, thereby generating much stronger AHE than bulk states in the thin film, even when the bulk is p -doped and the film has more than 200 atomic layers. Because surface band dispersions are sensitive to the surface/interface atomic structures, the AHC sign is surface-termination-dependent, rationalizing different AHC signs in reports Gonzalez Betancourt et al. 2023 ; Zhou et al. . For a fixed surface termination, we find that the surface AHE is determined by the bulk altermagnetic order, regardless of which spin sublattice is exposed on the surface. Both first-principles calculations and the effective surface state model analysis reveal that, the out-of-plane component of orbital magnetization—the source of AHE—remains unchanged for opposite spin sublattices on the surface as long as the bulk altermagnetic order remains the same. Our findings establish a unique surface-probe of bulk altermagnetism and pave the way for controlling magnetotransport of altermagnetic devices by surface and interface engineering. The paper is organized as follows. After introducing the methodology in Section II , we present the surface states at Fermi energy in Section III and analyze their contribution to the AHE in Section IV . In Section V , we show that the polarity of the surface AHE is dictated by the bulk Néel order and remains robust against variations in the surface magnetization direction for a given termination. In Section VI , we introduce a symmetry-based effective model for the surface states to elucidate the mechanism of AHE induced by the out-of-plane orbital moment and orbital texture, instead of surface magnetization. Section VII incorporates realistic interfacial chemistry to examine its impact on the AHE, revealing how different surface terminations (such as Te capping or a MnTe–InP interface) can significantly modify or even invert the AHC. Finally, Section VIII summarizes our findings. II Method Density-functional theory (DFT) calculations were performed using the Vienna ab initio simulation package ( vasp ) with the projector-augmented-wave (PAW) method Kresse and Furthmüller 1996 ; Kresse and Joubert 1999 . The exchange-correlation functional was treated within the generalized gradient approximation (GGA) using the Perdew–Burke–Ernzerhof (PBE) parametrization Perdew et al. 1996 . To account for electronic correlations in Mn- 3d states, we employed the DFT+ U method Dudarev et al. 1998 with on-site Coulomb interaction U=4.8 eV and exchange interaction J=0.8 eV. Maximally localized Wannier functions for Mn- s,d , Te- p , In- s,p , P- p , and H- s orbitals were constructed using the wannier90 package Souza et al. 2001 . For the magnetic-moment calculations, we used a 20\times 20\times 20 k -mesh. To demonstrate the interfacial effect in MnTe films that are usually