Comparison of Bar Formation Mechanisms. IIIA. The role of classical bulges in spontaneous bar formation agama ( 45 ) , GADGET-4 ( 43 ; 42 ) . NumPy ( 18 ) , SciPy ( 46 ) , Matplotlib ( 22 ) , Jupyter Notebook ( 27 )

Yirui Zheng, Juntai Shen, Bin-Hui Chen · 2026

Read Comparison of Bar Formation Mechanisms. IIIA. The role of classical bulges in spontaneous bar formation agama ( 45 ) , GADGET-4 ( 43 ; 42 ) . NumPy ( 18 ) , SciPy ( 46 ) , Matplotlib ( 22 ) , Jupyter Notebook ( 27 ) by Yirui Zheng, Juntai Shen, Bin-Hui Chen (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-12121.txt.

Introduction

Zheng, Shen, and Chen ask how classical bulges shape bar growth in disk galaxies. A suite of N-body runs evolves model galaxies with bulges of varied mass and compactness. Heavier, tighter bulges raise central speeds and stability while the disk share falls. Bars then start later and grow more slowly, and strong bulges can stop them outright. Young bars in such galaxies spin faster at first, then slow down faster too. Once a dilution effect is removed, later pattern speeds look much alike across bulges.

Catalog record

CREATORYirui Zheng, Juntai Shen, Bin-Hui Chen
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE42625
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.12121

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Comparison of Bar Formation Mechanisms. IIIA. The role of classical bulges in spontaneous bar formation agama ( 45 ) , GADGET-4 ( 43 ; 42 ) . NumPy ( 18 ) , SciPy ( 46 ) , Matplotlib ( 22 ) , Jupyter Notebook ( 27 ) Yirui Zheng, Juntai Shen, Bin-Hui Chen Abstract We run a suite of N N -body simulations to investigate how classical bulges affect bar formation and properties under the internal formation mechanism. We incorporate bulges of varying mass and compactness into disk galaxy models and evolve them in isolation to examine the resulting bar pattern speeds and growth timescales. A more massive/compact bulge increases the Toomre Q Q stability parameter and the circular velocity in the central region, while decreasing the disk mass fraction. It therefore delays the onset of bar formation and increases the bar growth timescale; sufficiently strong bulges can suppress bar formation entirely. During the formation stage, bars exhibit higher initial pattern speeds and faster deceleration rates when the bulges become more massive or compact. This faster deceleration persists after the bar buckling phase, leading to slower-rotating bars in the secular growth stage. However, when the bulge’s “diluting” effect on the measured bar strength is removed or reduced, all bars within the same disk share similar distributions in the pattern speed–bar strength ( Ω p \Omega_{p} – A 2 A_{2} ) space during the secular growth stage. They also show comparable ratios of the co-rotation radius to the bar length ( ℛ = R CR / R bar \mathcal{R}=R_{\mathrm{CR}}/R_{\mathrm{bar}} ) in this stage. These results suggest that the bulge’s influence on the pattern speed is more significant during the bar formation stage, while in the secular growth stage, the bulge’s effect may be less important, and the disk component dominates the pattern speed evolution. I Introduction Galactic bars are common and important structures of spiral galaxies. In the local universe, optical surveys find bars in nearly 50% of disk galaxies, a fraction that rises to approximately two-thirds in infrared bands ( 33 ; 37 ; 12 ; 29 ) . Although less frequent at higher redshifts, bars are still present, constituting roughly 13% of galaxies at 2<z\leq 3 ( 28 ) and have been detected as early as z\sim 4 ( 17 ) . These structures play an important role in driving the evolution of their host galaxies by fueling gas inflows, regulating star formation, and contributing to the formation of pseudo-bulges ( 35 ; 30 ; 32 ; 31 ; 23 ) . Given their ubiquity and influence, understanding the formation and evolution of bars is critical in galactic dynamics. Galactic bars can form via two primary mechanisms: internal instability and external perturbations. The internal, or spontaneous, mechanism arises from gravitational instability within the disk itself ( 20 ; 38 ; 41 ; 52 ) . A well-established mechanism for spontaneous bar formation is the swing amplification feedback loop that was first introduced by 16 and 25 , later elaborated in detail by 44 , and more recently revisited and clarified by 3 . However, the presence of a strong bulge or central mass concentration can introduce inner Lindblad resonances (ILR), which disrupts this feedback loop and thereby suppresses bar formation ( 44 ; 2 ) . If not disrupted, the feedback loop predicts an exponential growth in bar strength. The growth rate, or equivalently, the formation timescale of bars formed via internal instability, is found to be influenced by several factors, including the bulge-to-disk mass ratio ( 26 ) , the Toomre Q parameter ( 21 ; 48 ) , and the disk thickness ( 15 ) . 13 reported an exponential decrease in formation timescale with increasing disk mass fraction—the “Fujii relation”—later confirmed by 6 . The latter study introduced a key methodological improvement: it quantified the exponential growth timescale predicted by the swing amplification loop to measure bar formation instead of using the time the bar strength exceeds a fixed threshold (e.g., A_{2,max}>0.2 ). 8 extended the Fujii relation in disk galaxies to a three-dimensional parameter space of disk mass fraction, Toomre Q , and disk thickness. Their empirical relation revealed a linear dependence of the bar growth timescale on both Q and the disk thickness. The disk mass fraction is established as the key factor governing the bar formation timescale ( 13 ; 6 ; 5 ; 4 ; 8 ) . Since the presence of a bulge reduces this fraction, the bulge component is consequently expected to have a significant effect on the timescale for bar formation. In addition, bulges increase the Toomre Q parameter, particularly in the inner disk, and may also influence the disk thickness. Therefore, bulges can affect bar formation through these two additional factors as well. Several studies have examined how bulges or central mass concentrations (CMCs) suppress bar formation, although a universal, quantitative criterion for suppression remains elusive due to the problem’s inherent complexity ( 26 ; 39 ; 24 ; 48 , e.g.,) . Nonetheless, consistent trends regarding the bulge’s influence on bar properties have emerged. 26 demonstrated that bars have higher pattern speeds in galaxies with more massive bulges, and that the pattern speed decelerates more rapidly as the bulge mass fraction increases. 24 confirmed that bars tend to be stronger, longer, and rotate more slowly in galaxies with less massive and less compact bulges. This trend is further supported by 36 , who also validated it observationally in a sample of 210 MaNGA disk galaxies, finding that slow bars are preferentially associated with weaker bulges. Besides internal instabilities, bars can also be triggered by external perturbations, such as tidal forces from galaxy clusters, flyby encounters, collisions, or mergers ( 7 ; 14 ; 51 ; 34 ; 53 ) . In this series of papers, we aim to comprehensively compare the properties of bars formed via internal instability versus those formed under external perturbations. In the first paper of this series ( 50 , Paper I hereafter) , we conducted a suite of controlled N -body simulations in which bars form either internally or under tidal perturbations. We constructed three pure disk galaxy models of varying dynamical “hotness” and simulated their evolution both in isolation and under flyby interaction. We then measured bar properties, comparing pattern speeds in Paper I and extended the comparison to exponential growth rates in the second paper ( 49 , Paper II hereafter) . For cold and warm disks—which can form bars spontaneously in isolation—tidal interactions promote bars to a more advanced evolutionary stage. Nevertheless, these tidally induced bars exhibit pattern speeds and growth timescales similar to their spontaneously formed counterparts within the same disk. In hot disks, which are stable against internal bar instability, a bar forms only under external perturbations and rotates more slowly than bars in cold or warm disks. Therefore, if “tidally induced bars” refer exclusively to those in otherwise bar-stable galaxies, they do rotate more slowly. However, this difference is attributed to the intrinsic properties of the host galaxy rather than to the formation mechanism itself. As for growth timescales of these bars, their growth deviates from an exponential profile and is better described by a linear

Read the complete text