Calibration of electric fields in low-frequency off-resonant Rydberg receivers
Baran Kayim, Michael A. Viray, David S. La Mantia, Daniel Richardson, James Dee, Ryan S. Westafer, Brian C. Sawyer, Robert Wyllie · 2026
Read Calibration of electric fields in low-frequency off-resonant Rydberg receivers by Baran Kayim, Michael A. Viray, David S. La Mantia, Daniel Richardson, James Dee, Ryan S. Westafer, Brian C. Sawyer, Robert Wyllie (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-10898.txt.
Introduction
Baran Kayim and coauthors calibrate Rydberg atom-based receivers. These receivers sense electric fields across a wide band, from 1 kHz up to 300 MHz. A three-photon excitation scheme applies the fields. A transverse electromagnetic waveguide also applies them. Screening inside quartz and sapphire vapor cells matches a model. That model rests on electrical measurements of the waveguide. They also report the best noise-equivalent field at the top of the band. They characterize sensitivity across the ultra-low to very-low frequency range.
Catalog record
| CREATOR | Baran Kayim, Michael A. Viray, David S. La Mantia, Daniel Richardson, James Dee, Ryan S. Westafer, Brian C. Sawyer, Robert Wyllie |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 42510 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.10898
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Calibration of electric fields in low-frequency off-resonant Rydberg receivers Baran Kayim, Michael A. Viray, David S. La Mantia, Daniel Richardson, James Dee, Ryan S. Westafer, Brian C. Sawyer, Robert Wyllie Abstract We present results on Rydberg atom-based electric field sensing in the range of 1 kHz - 300 MHz, using a three-photon Rydberg excitation scheme and a transverse electromagnetic (TEM) line waveguide to apply low-frequency rf fields to the cell. Measurements of low-frequency screening in quartz and sapphire vapor cells show excellent agreement with a phenomenological model of the effective vapor cell material properties based on an electrical 2-port measurement of the TEM line. We achieve a best noise-equivalent field of 106(4) μ V m Hz \mathrm{\frac{\mu V}{m\sqrt{Hz}}} at 300 MHz and characterize noise-equivalent fields in the ultra-low to very-low frequency (ULF-VLF) band. I Introduction Rydberg atoms 19 are a promising platform for SI-traceable, self-calibrated, and broadband passive radio-frequency (rf) receivers, with high sensitivities owing to large transition dipole moments and dynamical polarizabilities in the Rydberg manifold 19 ; 22 ; 17 . Rydberg atomic receivers have also demonstrated capabilities such as phase-sensitive 51 ; 26 and polarization-sensitive 47 ; 3 detection, in addition to angle-of-arrival rf measurements with both sensor arrays and individual vapor cells 40 ; 39 ; 46 . Typical detection experiments include spectroscopic probing using Autler-Townes (AT) splitting 17 or off-resonant AC Stark shifts 2 ; 29 , and the electric field sensitivities of these schemes can be further enhanced with homodyne 28 and heterodyne 26 ; 20 schemes using an additional local oscillator (LO) field. Resonant transitions between Rydberg states typically allow for detection ranging from hundreds of GHz to tens of MHz 11 ; 50 . However, resonant detection of frequencies below the VHF band ( < 300 MHz) has proven challenging, requiring either higher principal quantum number states or high angular momentum states. Furthermore, both resonant and off-resonant Rydberg receivers from the ultra-low frequency to very-high frequency (ULF to VHF) range (300 Hz - 300 MHz) experience conductive screening from atoms adsorbed on the inner surfaces of vapor cells (as illustrated in Fig. 1 ). The magnitude and frequency dependence of this conductive screening effect varies with vapor cell material, wall temperature, and vapor pressure 8 ; 25 ; 38 ; 32 . The increase in the effective sheet conductivity of the vapor cell’s inner surface from these adsorbates has a high-pass filtering effect, causing a frequency-dependent attenuation of the electric field reaching the atomic vapor 25 ; 1 ; 36 . At low frequencies where the vapor cell dimensions ( \ell ) are deeply sub-wavelength (\ell\ll\lambda) , we can model this behavior with a frequency-dependent shielding factor \eta(\omega) (as seen in Fig. 1 ): E_{cell}=\eta(\omega)E_{sig} (1) Figure 1 : Depiction of the vapor cell shielding effect, where the frequency-dependent bulk dielectric constant \epsilon(\omega) and the sheet conductivity of the inner surface \sigma_{surface} induced by adsorption of the alkali atoms conductively shields electric field E_{sig} applied by a pair of external electrodes to yield a reduced field amplitude E_{cell}\penalty\ =\penalty\ \eta(\omega)E_{sig} for \eta(\omega)\penalty\ \leq\penalty\ 1 . In the frequency range covered in this paper, vapor cell length \ell\ll\lambda for signal field wavelength \lambda where E_{cell} is the electric field amplitude internal to the vapor cell, E_{sig} is the external signal electric field incident on the vapor cell, and \eta(\omega)\leq 1 . This is distinct from the effect in vapor cells for \ell\gg\lambda , wherein spatial variation of the rf electric field amplitude is caused by partial standing waves formed inside the vapor cell 18 . In this paper we present a calibrated Rydberg atom measurement of the screening effect that is in excellent agreement with a recently-developed material extraction model for dispersive effects in vapor cells 38 . This model is based on a completely independent electromagnetic measurement of the vapor cell’s two-port parameters. It is important for the benchmarking of Rydberg receivers as fieldable electric field sensors to both measure and model the factor \eta(\omega) , since knowledge of this screening factor is critical to accurately report low-frequency noise-equivalent field in reference to the incoming field amplitude, as opposed to a self-calibrated atomic measurement ignoring the screening effect. To characterize the screening effect, we implement a three-photon Rydberg receiver scheme in rubidium vapor 11 , utilizing a transverse electromagnetic (TEM) waveguide to apply uniform 1 kHz - 300 MHz rf electric fields to the room-temperature vapor cell at the Rydberg atoms 38 . For continuously-tunable field detection in the VHF band, we measure the Stark shift of an electromagnetically induced transparency (EIT) 9 ; 6 transmission peak in response to an off-resonant signal field applied to the waveguide. We achieve a best noise-equivalent field of 106(4) \mathrm{\frac{\mu V}{m\sqrt{Hz}}} at 300 MHz using the 55F 7/2 state. Throughout this paper, reported noise-equivalent fields include any relevant vapor cell screening effects. This paper is structured as follows: in Sec. II we present our experimental apparatus and a characterization of our TEM waveguide. In Sec. III we present both our measured low-frequency screening coefficients and our noise-equivalent field results, and briefly summarize the Debye material model and methods to extract the Debye material properties that we have presented more fully elsewhere 38 . Finally, in Sec. IV , we compare our noise-equivalent field results to those achieved in the literature for similar frequency ranges and conclude with an outlook for future work. II Experiment We present results from two vapor cells: (1) a 6.9 cm long, 16 mm internal diameter cylindrical quartz vapor cell 1 1 1 Thorlabs part number: GC19075-RB87 with wall thickness 1.5 mm filled with isotopically pure 87 Rb, and (2) a 1.4 cm side-length cubic sapphire vapor cell 2 2 2 Manufactured by Japan Cell Inc. with a natural-abundance mixture of 85 Rb (72.2 \% ) and 87 Rb (27.8 \% ). In the sapphire cell, we address transitions in 85 Rb. For both cells, we utilize a three-photon excitation scheme (Fig. 2 ) to access the 55F 7/2 state in Rb, similar to previous work 11 . The laser wavelengths 780 nm, 776 nm, and 1257 nm, respectively couple state transitions \ket{5S_{1/2}, F = 2} \rightarrow \ket{5P_{3/2}, F' = 3} \rightarrow \ket{5D_{5/2}, F'' = 4} \rightarrow \ket{55F_{7/2}} for 87 Rb and \ket{5S_{1/2}, F = 3} \rightarrow \ket{5P_{3/2}, F' = 4} \rightarrow \ket{5D_{5/2}, F'' = 5} \rightarrow \ket{55F_{7/2}} for 85 Rb. The detuning of the 1257 nm coupler laser is represented by \Delta_{c} , while the other two lasers are tuned onto resonance. The principal quantum number n = 55 is chosen empirically as a Rydberg state balancing high atomic polarizability against minimal EIT lineshape broadening due to factors such as collisional broadening or stray DC electric field gradients within the vapor cell. We define a figure of merit given by the ratio of EIT peak height to full width at half-maximum ratio for several states of differing principal quantum number. Figure 2 : (Top) Level diagram for optical excitation in the off-resonant detection scheme, where three optical transitions connect the Rb ground state to the Rydberg state 55F_{7/2} . An off-resonance signal field with frequency \omega_{sig} and an off-resonance local oscillator with frequency \omega_{LO} incident on the Rydberg