Gauge transformation for pulse propagation and time ordered integrals

Adel Abbout · 2026

Read Gauge transformation for pulse propagation and time ordered integrals by Adel Abbout (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-10659.txt.

Introduction

Adel Abbout investigates a gauge transformation built by removing time-dependent onsite potentials at single sites, in finite or infinite systems. The trick works site by site, one site at a time. The change resets the inward hoppings by one phase factor and the outward hoppings by its inverse. That reshaping pays off in two places. It eases simulating how pulses propagate in scattering systems. It also greatly simplifies the time-ordered integrals in the evolution operator for the time-dependent Schrödinger equation.

Catalog record

CREATORAdel Abbout
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE16510
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.10659

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Gauge transformation for pulse propagation and time ordered integrals Adel Abbout Abstract We investigate a gauge transformation based on the successive elimination of time-dependent onsite potentials at individual sites in finite or infinite systems. Our analysis shows that this transformation renormalizes the inward hoppings by a phase factor e i ​ ϕ ​ ( t ) e^{i\phi(t)} and the outward hoppings by e − i ​ ϕ ​ ( t ) e^{-i\phi(t)} . We further demonstrate how this procedure facilitates the reduction and simulation of pulse propagation in scattering systems, while significantly simplifying the time-ordered integrals involved in the time evolution operator for time-dependent Schrödinger equation. I introduction Time-dependent perturbations in mesoscopic systems generate non-equilibrium states that result in observables such as time-dependent currents 6 , density modulation, and spin pumping 13 ; 14 . Analyzing these effects typically requires solving the time-dependent Schrödinger equation, which demands particular care 10 and often complicates the interpretation of the system’s physical behavior 4 ; 5 . Since energy is not conserved in the presence of external driving, one must consider infinite sums or integrals corresponding to all possible absorption and emission processes of quantum excitations 16 ; 11 . Moreover, the evolution operator generally involves time-ordered integrals, which in most cases need to be evaluated numerically 17 . Simplifying the system or choosing an appropriate representation can lead to more transparent expressions and connect the problem to familiar concepts such as independent scattering processes 15 . In this work, we investigate a convenient gauge transformation for handling time-dependent perturbations (such as pulses, periodic driving, or sudden potential changes) 13 ; 14 ; 10 ; 16 and demonstrate its utility through several illustrative examples. We focus on Hamiltonians (Not necessarily Hermitian) of the form: \mathscr{H}=-\sum_{\left(k,k^{\prime}\right)\in\text{ hop }}\gamma^{kk^{\prime}}c^{\dagger}_{k}c_{k^{\prime}}-e\sum_{k\in\text{ list }}V_{k}(t)c_{k}^{\dagger}c_{k} (1) where c_{k}^{\dagger} ( c_{k} ) is the creation (anihiliation) operator of an electron at site k and \gamma^{kk^{\prime}} is the hopping parameter between two sites (from site k^{\prime} to site k ). The parameter ”list” refers to the list of sites in the system and ”hop” refers to all the possible hoppings between pairs of sites. The time-dependent potential V_{k}(t) is taken to be site-dependent. e is the electric charge. This Hamiltonian is the tight-binding representation of the Schrödinger operator on a regular lattices but can also work for more general cases like when defined on a graph (Random Matrix Theory) 2 ; 3 ; 1 . We would like to know what is the effect of eliminating the potential V_{l}(t) on the specific site of index l using the operator: U_{l}\equiv e^{-i\phi_{l}(t)c_{l}^{\dagger}c_{l}}=\sum_{n=0}^{\infty}\frac{(-i\phi_{l})^{n}}{n!}\left(c_{l}^{\dagger}c_{l}\right)^{n} (2) with the phase \phi_{l}(t) defined as : \phi_{l}(t)=\frac{e}{\hbar}\int^{t}_{-\infty}V_{l}(t^{\prime})dt^{\prime} (3) The operator U_{l} can be simplified if someone recalls that for Fermions \left(c_{l}^{\dagger}c_{l}\right)^{n}=c_{l}^{\dagger}c_{l},\forall n\neq 0 and c^{\dagger}_{k}c^{\dagger}_{k}=c_{k}c_{k}=0 We can straightforwardly find that U_{l}=1+z_{l}c_{l}^{\dagger}c_{l} with z_{l}=e^{-i\phi_{l}(t)}-1 . The new Hamiltonian with this gauge transformation will be : \tilde{\mathscr{H}}=U_{l}^{\dagger}\mathscr{H}U_{l}-i\hbar U_{l}^{\dagger}\partial_{t}U_{l} (4) simple algebra shows that U_{l}^{\dagger}c_{k}^{\dagger}c_{k^{\prime}}U_{l}=\begin{cases}(1+z_{l}^{*})c_{k}^{\dagger}c_{k^{\prime}}&l=k\neq k^{\prime}\\ (1+{z}_{l})c_{k}^{\dagger}c_{k^{\prime}}&l=k^{\prime}\neq k\\ c_{k}^{\dagger}c_{k^{\prime}}&\text{else}\\ \end{cases} (5) Applying this to eq. 4 the Hamiltonian eq. 1 becomes \begin{split}\tilde{\mathscr{H}}=&-\sum_{\left(k,k^{\prime}\right)\in\text{ hop}^{\prime}}\gamma^{kk^{\prime}}c_{k}^{\dagger}c_{k^{\prime}}-e\sum_{k\in\text{ list}^{\prime}}V_{k}(t)c_{k}^{\dagger}c_{k}\\ &-\sum_{k^{\prime}\in\text{list}^{\prime}}\gamma^{lk^{\prime}}e^{+i\phi_{l}(t)}c_{l}^{\dagger}c_{k^{\prime}}-\sum_{k\in\text{ list}^{\prime}}\gamma^{kl}e^{-i\phi_{l}(t)}c_{k}^{\dagger}c_{l}\end{split} (6) Figure 1: The gauge transformation effect on a graph. The hoppings from the central site (site 1) are renormalized by a phase factor e^{+i\phi_{1}} when they are inward and by e^{-i\phi_{1}} when they are outward. It is worth noting that \gamma_{45} and \gamma_{54} are not changed since they do not involve the site 1 where \text{hop}^{\prime} and \text{list}^{\prime} are the list of hoppings and sites that do not involve the site l respectively. To explain Eq. 6 with simple words, the elimination of the potential V_{l}(t) at a given site l requires renormalizing the hopping terms connected to that site. Specifically, the outward hopping from site l acquires a phase factor e^{-i\phi_{l}(t)} , while the inward hopping acquires e^{+i\phi_{l}(t)} , as illustrated in Fig. 1 . All other hoppings that do not involve site l remain unchanged. It is worth noting that this gauge transformation does not require the Hamiltonian to be Hermitian, and one does not need to eliminate the full potential V_{l}(t) . Instead, one may remove any portion of the potential and adjust the hopping phases accordingly (similarly to Eq. 3 ). This procedure can be repeated for any number of sites in the system. Examples of use: To study the propagation of an electric pulse in an infinite system, consider a scattering setup composed of a finite central region connected to two semi-infinite leads (see Fig. 2 ). The potential in one of the leads is raised from zero to a maximum value and then brought back to zero following a time profile V(t) , which defines the pulse. The function V(t) may be Lorentzian, Gaussian, triangular, or take any other shape. Most time-dependent Schrödinger equation solvers (e.g., tkwant 11 ) cannot directly handle a time-dependent potential applied to an infinite region. Instead, they perform the gauge transformation described above on all sites of the lead. In this process, each hopping within the lead is renormalized twice, once for each of its two neighboring sites, acquiring opposite phase factors. These phases cancel, leaving all hoppings in the lead unchanged, except for the hopping at the interface with the central system. Figure 2: a) 1D scattering system (orange color) connected to two semi-infinite leads. The left lead is rised to a potential V(t) . b) The potential V(t) can be eliminated by a gauge transformation leading to unchanged hoppings in the lead and only the hopping at te interface (in red color) is affected by a phase factor e^{\pm i\phi(t)} (depending on the hopping left to right or the opposit.). As shown in Fig. 2 , the resulting system therefore contains only a finite number of time-dependent hoppings, located at the interface between the lead and the scattering region. This special case where V(t) is uniform in the lead explains why for exmple tkwant puts the phase hoppoing at the interface 11 . time dependent potential on a finite system: If a uniform potential is applied to a finite system, a gauge transformation removes the time dependence from the central region while transferring it entirely to the hoppings that connect the system to the leads. These interface hoppings acquire the usual phase factor e^{\pm i\phi(t)} . In Fig. 3 (a), the ring-shaped system is subject to a uniform time-dependent onsite potential (shown in orange). Applying the gauge transformation site by site eliminates this potential everywhere inside the ring. As a result, all hoppings within the central system remain unchanged: the phase factors associated with neighboring sites cancel exactly on each internal bond. Only the hoppings at the interfaces acquire a phase factor e^{\pm i\phi(t)} , as shown in Fig. 3 (b). This example highlights a key point: increasing the potential uniformly in the lead is gauge-equivalent to decreasing it uniformly in the central system. After the transformation, the time dependence survives solely at the interface between the lead and the system. Figure 3: Eliminating the uniform onsite potential (orange) in (a) results in a central region without any potential (white sites), while the hoppings within the central system remain unchanged. This occurs because neighboring sites contribute opposite phase factors that cancel out. Only the hoppings at the interface are modified, acquiring

Read the complete text