Mapping the critical region along the second-order chiral phase boundary
Shi Yin · 2026
Read Mapping the critical region along the second-order chiral phase boundary by Shi Yin (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-10260.txt.
Introduction
Yin maps how wide the critical scaling zone runs along the second order chiral phase edge at finite chemical potential. Working in the quark meson model with the functional renormalisation group, Yin tracks the chiral order term and correlation length against temperature and pion mass. Drawn exponents mark where scaling ties hold true. Both lead and next to lead scaling zones shrink as chemical potential grows, in the local potential frame and its anomalous extension alike.
Catalog record
| CREATOR | Shi Yin |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 58640 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.10260
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Mapping the critical region along the second-order chiral phase boundary Shi Yin Abstract We investigate the extent of the critical scaling region of the chiral phase transition at finite chemical potential within the quark–meson (QM) model using the functional renormalization group (fRG) approach. By analyzing the scaling behavior of the chiral order parameter and correlation length with respect to temperature and pion mass near the second-order phase transition, we extract critical exponents from the data and quantify the range over which the scaling relations remain valid. We find that both the leading order and the next-to-leading-order scaling regions systematically shrink as the chemical potential increases. This behavior is observed in both the local potential approximation (LPA) and its extension including anomalous dimensions ( LPA ′ \mathrm{LPA}^{\prime} ), with qualitatively consistent results, while the scaling region in LPA ′ \mathrm{LPA}^{\prime} is slightly smaller than that in LPA. I Introduction According to the quantum chromodynamics (QCD), strong interaction matter undergoes a transition from a hadronic phase to a quark–gluon plasma (QGP) phase at finite temperature. For physical values of the current quark masses, this transition is a smooth crossover Bazavov et al. 2019 ; Borsanyi et al. 2020 . In the limit of massless light quarks, i.e., chiral limit, the crossover is replaced by a genuine chiral phase transition. As predicted in Pisarski and Wilczek 1984 , in the chiral limit of light quarks, the transition may be associated with a second-order phase transition in the 3d-O(4) universality class. However, due to the impact of the U_{A}(1) anomaly on the phase transition, determining the Columbia plot of the QCD phase diagram remains an active topic of research. To further investigate the nature of the QCD phase transition, numerous model studies Chen et al. 2021 ; Schaefer and Wambach 2005 ; Pawlowski and Rennecke 2014 ; Giacosa et al. 2025 ; Fejos and Hatsuda 2024 , functional QCD studies Braun et al. 2020 ; Gao and Pawlowski 2022 ; Braun et al. 2023 and lattice QCD simulations Ding et al. 2019 have been carried out. At present, there is no consensus on the size of the critical region associated with the chiral phase transition. In recent years, both lattice QCD and functional continuum approaches have provided estimates of the size of this critical region. The behavior of different thermodynamic observables is analyzed by lattice QCD, such as the pseudo-critical temperature at different pion masses in an attempt to extract critical scaling behavior Ding et al. 2019 ; Borsanyi et al. 2020 ; Aarts et al. 2022 ; Kotov et al. 2021 ; Aarts et al. 2023 ; Ding et al. 2023 . Although functional continuum approaches are limited by truncations, their relatively precise calculations near the chiral limit provide valuable insights into the study of the chiral phase transition. The magnetic equation of state for 2+1-flavor QCD has been computed by Dyson–Schwinger equation (DSE) Gao and Pawlowski 2022 . The results provided a first estimate of the size of the critical region along the mass direction and also determined the order of the phase transition on the Columbia plot Bernhardt and Fischer 2025 . Subsequently, the functional renormalization group (fRG) has been applied to QCD to perform high-precision calculations of the critical behavior in the chiral limit Braun et al. 2020 ; Braun et al. 2023 . Near the chiral critical temperature of QCD in the chiral limit, fRG yields critical exponents associated with the Wilson–Fisher (WF) fixed point of the O(4) universality class. They further investigate the pion mass range over which the magnetic equation of state obeys critical part of scaling function, finding that the scaling behavior is only valid for pion mass below approximately 10 MeV. This mass range is outside the data range of lattice QCD. Both DSE and fRG studies suggest that, at vanishing chemical potential, the critical region along the pion mass direction is smaller than anticipated and dominated by soft modes. To circumvent the complexity of full QCD computation while preserving its essential features, several low-energy effective models, such as O(N) model Jüttner et al. 2017 ; Tan et al. 2024 , linear sigma model Umekawa et al. 1999 ; Grahl and Rischke 2013 , quark–meson (QM) model Stokic et al. 2010 ; Berges et al. 1999 ; Braun et al. 2011 ; Chen et al. 2021 , and the Nambu–Jona-Lasinio (NJL) model Strouthos and Christofi 2005 ; Fu et al. 2008 , have been employed to study the chiral phase transition. Non-equilibrium dynamical critical behavior has likewise been studied using the fRG approach, see Chen et al. 2025 ; Roth and von Smekal 2023 . While critical exponents have been widely studied in models and QCD, existing analyses are largely restricted to vanishing chemical potential, and the dependence of the critical region on chemical potential remains poorly explored. In the chiral limit, the chiral phase transition at finite chemical potential remains of second-order until it turns into a first-order transition at the tri-critical point (TCP). The TCP connects the O(4) second-order transition to the first-order one and is also linked to the Z(2) second-order transition line, along which the critical endpoint (CEP) at physical quark mass lies, see Chen et al. 2021 . By estimating how the size of the critical region varies with chemical potential, one can obtain a rough expectation for the extent of the critical region around the TCP and, by extension, the CEP. One can thereby infer the possible range over which critical fluctuations associated with a CEP in the QCD phase diagram may affect experimental observables, e.g., baryon number fluctuations Fu et al. 2025 ; Fu et al. 2021 . For studies of the critical behavior of the QM model at the TCP and CEP, analyzed via quark-number cumulants within mean-field and fRG approaches, see Schaefer and Wagner 2012 ; Schaefer and Wambach 2007 . In this work, we perform a first exploratory study using a QM model computed within the fRG framework. Following a strategy similar to that of Braun et al. 2023 , we compute the chiral order parameter and the correlation length, and examine the ranges in temperature and pion mass where their behaviors are governed by the critical part of the scaling function, then investigate the density dependence of the size of the static critical region. This paper is organized as follows: In Section II , we briefly introduce the QM model employed in this work and the flow equations involved in the fRG approach. In Section III , the order parameter and correlation length are computed around the phase transition, and their temperature and pion mass dependence are investigated along the phase boundary. The range of applicability of the critical part of the scaling functions is discussed in Section IV . In the end, the summary and conclusions are given in Section VI . II quark-meson model within functional renormalization group approach As a starting point, this section introduces the QM model employed in this work, along with the technical details required for the fRG approach calculations. In order to incorporate the QM model into the framework of fRG, we first formulate the scale-dependent effective action of the model \displaystyle\Gamma_{k}[\phi,q,\bar{q}] \displaystyle=\int_{x}\bigg\{Z_{q,k}\,\bar{q}\big[\gamma_{\mu}\partial_{\mu}-\gamma_{0}\,\hat{\mu}\big]q+\frac{1}{2}\,Z_{\phi,k}\,(\partial_{\mu}\phi)^{2} \displaystyle+\frac{1}{2}\,h_{k}\,\bar{q}(\tau^{0}\sigma+i\gamma_{5}\bm{\tau}\cdot\bm{\pi})q+U_{k}(\rho)-c\sigma\bigg\}\,. (1) In this