Distributed Multichannel Wiener Filtering for Wireless Acoustic Sensor Networks

Paul Didier, Toon van Waterschoot, Simon Doclo, Jörg Bitzer, Pourya Behmandpoor, Henri Gode, Marc Moonen · 2026

Read Distributed Multichannel Wiener Filtering for Wireless Acoustic Sensor Networks by Paul Didier, Toon van Waterschoot, Simon Doclo, Jörg Bitzer, Pourya Behmandpoor, Henri Gode, Marc Moonen (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-09735.txt.

Introduction

Paul Didier and colleagues propose a shared way for wireless acoustic sensor networks to pull speech out of noise. Each small device should match what one central Wiener filter could do with every microphone signal, yet send far less data. Their dMWF method is not iterative and stays optimal even when nodes hear different sources. Simulated speech tests show it beats the DANSE method early on.

Catalog record

CREATORPaul Didier, Toon van Waterschoot, Simon Doclo, Jörg Bitzer, Pourya Behmandpoor, Henri Gode, Marc Moonen
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE89296
LICENSEhttp://creativecommons.org/publicdomain/zero/1.0/
RIGHTSCC0
SOURCEarXiv

Source: https://arxiv.org/abs/2603.09735

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Distributed Multichannel Wiener Filtering for Wireless Acoustic Sensor Networks Paul Didier, Toon van Waterschoot, Simon Doclo, Jörg Bitzer, Pourya Behmandpoor, Henri Gode, Marc Moonen Abstract In a wireless acoustic sensor network (WASN), devices (i.e., nodes) can collaborate through distributed algorithms to collectively perform audio signal processing tasks. This paper focuses on the distributed estimation of node-specific desired speech signals using network-wide Wiener filtering. The objective is to match the performance of a centralized system that would have access to all microphone signals, while reducing the communication bandwidth usage of the algorithm. Existing solutions, such as the distributed adaptive node-specific signal estimation (DANSE) algorithm, converge towards the multichannel Wiener filter (MWF) which solves a centralized linear minimum mean square error (LMMSE) signal estimation problem. However, they do so iteratively, which can be slow and impractical. Many solutions also assume that all nodes observe the same set of sources of interest, which is often not the case in practice. To overcome these limitations, we propose the distributed multichannel Wiener filter (dMWF) for fully connected WASNs. The dMWF is non-iterative and optimal even when nodes observe different sets of sources. In this algorithm, nodes exchange neighbor-pair-specific, low-dimensional (fused) signals estimating the contribution of sources observed by both nodes in the pair. We formally prove the optimality of dMWF and demonstrate its performance in simulated speech enhancement experiments. The proposed algorithm is shown to outperform DANSE in terms of objective metrics after short operation times, highlighting the benefit of its iterationless design. I Introduction Microphone arrays have been widely used in various applications to tackle audio signal processing tasks such as noise reduction, acoustic echo cancellation, or dereverberation. They have traditionally been deployed in centralized settings where the recorded signals are aggregated and processed in a central processing unit, the so-called fusion center. However, distributed settings recently garnered increasing attention due to the possibility to build wireless acoustic sensor networks (WASNs) , as more and more devices capable of recording, processing, and wirelessly transmitting audio data (e.g., laptops, smartphones, hearing aids, smart speakers) are available in our surroundings. Such networks may be described as wireless communication graphs where each node is a device equipped with one or more sensors (microphones). Nodes in a WASN may be arbitrarily positioned, rendering WASNs flexible, scalable, and capable of covering wider spatial areas than centralized systems. These important advantages have led to the development of distributed audio signal processing algorithms. The goal of a distributed algorithm is to reach a performance that is as good as that of an equivalent centralized system, while accounting for the inherent challenges of distributed settings, e.g., limited communication bandwidth, synchronicity, or wireless link failures [ 6 ] . In this paper, we focus on node-specific distributed signal estimation through multichannel Wiener filtering, i.e., the challenge of estimating node-specific desired signals through a multichannel Wiener filter (MWF) (solution to a linear minimum mean square error (LMMSE) problem) applied to multiple noisy signals by letting devices in a WASN exchange signals and share the computation load. We specifically aim at addressing the communication bandwidth challenge present in distributed settings and explicitly choose not to consider other (albeit equally important) challenges such as, e.g., synchronicity [ 20 ] or optimal sensor selection [ 26 ] . Signal estimation often relies on filtering techniques such as, e.g., beamforming via the minimum variance distortionless response (MVDR) beamformer or the linearly constrained minimum variance (LCMV) beamformer. These filters minimizes output power while maintaining a certain response toward the target [ 23 ] . Beamforming typically requires estimation of (relative) acoustic transfer functions, which is challenging in practice. An alternative technique is Wiener filtering via the MWF , a LMMSE estimator which is computed via spatial covariance matrices ( SCMs ) estimated via the available signals. The MWF is the focus of the present paper. Attempts to formulate a distributed MWF with limited communication bandwidth usage [ 12 ] have led to the introduction of the distributed adaptive node-specific signal estimation (DANSE) algorithm [ 7 , 4 , 5 ] , which converges towards the equivalent MWF through iterations. In DANSE , nodes only transmit dimensionally reduced (i.e., fused) versions of their local sensor signals, thereby partly relieving the communication bandwidth usage. The DANSE algorithm and its extensions all involve algorithmic iterations to compute the distributed filter and optimality , i.e., matching the performance of the equivalent centralized MWF , is only met after upon convergence (typically several tens of iterations in a static acoustic scenario) [ 4 ] . The number of iterations required to reach convergence generally increases with the total number of nodes. As each iteration involves time-averaging over several time-frames to estimate second-order statistics, the final application must tolerate significant delays before a reliable estimate is available. This significantly limits the relevance of such algorithms in practical applications, particularly in time-varying acoustic environments where quick adaptivity is paramount. It should be noted that, although non-iterative distributed filters have been proposed [ 16 , 17 ] , they generally rely on heuristic arguments and do not aim at solving a particular optimization problem. Most distributed solutions to the signal estimation problem, including the DANSE algorithm and its extensions, assume that all sound sources of interest are observed by all nodes in the WASN to guarantee optimality upon convergence. In other words, they assume that the same low-dimensional signal subspace is spanned by the desired signals of all nodes. We refer to this as a fully overlapping desired subspaces (FODS) scenario. In any given acoustic environment, a sound source is only observed by a node if the signal it generates contributes to the sensor signals captured at that node. The case may arise where a particular source of interest to a node does not contribute significantly to the local sensor signals of another node 1 1 1 In practice, every source will always have some contribution to the signals recorded at each sensor in the environment. However, in some cases, this contribution may be small, even below the noise floor (e.g., the microphone self-noise), or buried under undesired sources contributions. – the source may, e.g., be too far or obstructed from that node. In such case, the subspaces spanned by the desired signals of different nodes do not fully overlap, which is referred to as a partially overlapping desired subspaces (PODS) scenario, and optimality of the aforementioned algorithms can generally 2 2 2 It can be noted that, if some nodes do not observe some source(s) but the number of signals exchanged between nodes is larger than the total number of sources in the environment, the R-DANSE algorithm from [ 3 ] may be applied to still iteratively reach the centralized solution. The R-DANSE algorithm slightly modifies the DANSE algorithm from [ 4 ] , using fused signal channels from nodes that do observe the source(s) unobserved by the updating node to define the desired signal at the updating node, thereby artificially reinstating the FODS condition. We note that, in practice, it may be undesired or impossible to modify the desired signals of some nodes [ 9 ] . not be guaranteed [ 4 ] . The PODS scenario has been investigated in the context of DANSE

Read the complete text