Narrowband heralded single photons via Bragg grating inscription in germanium-doped photonic crystal fiber
Will A. M. Smith Alex I. Flint, Rex H. S. Bannerman, James C. Gates, Peter G. R. Smith, Alex O. C. Davis, Peter J. Mosley · 2026
Read Narrowband heralded single photons via Bragg grating inscription in germanium-doped photonic crystal fiber by Will A. M. Smith Alex I. Flint, Rex H. S. Bannerman, James C. Gates, Peter G. R. Smith, Alex O. C. Davis, Peter J. Mosley (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-09679.txt.
Introduction
Will A. M. Smith and colleagues present a narrowband heralded single photon source built in fiber, for the telecom C-band. Photon pairs arise in photonic crystal fiber by spontaneous four-wave mixing, and the fiber's core holds a germanium-doped region for photosensitivity. A fiber Bragg grating written into the fiber reflects a sub-nanometre slice of the pair spectrum. Narrowband photons are then heralded at the near end by detections at the far end, with a coincidence-to-accidental ratio up to 70.
Catalog record
| CREATOR | Will A. M. Smith Alex I. Flint, Rex H. S. Bannerman, James C. Gates, Peter G. R. Smith, Alex O. C. Davis, Peter J. Mosley |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 24379 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.09679
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Narrowband heralded single photons via Bragg grating inscription in germanium-doped photonic crystal fiber Will A. M. Smith Alex I. Flint, Rex H. S. Bannerman, James C. Gates, Peter G. R. Smith, Alex O. C. Davis, Peter J. Mosley Abstract 1 Centre for Photonics, Department of Physics, University of Bath, Bath, BA2 7AY, UK 2 Optoelectronics Research Centre, University of Southampton, Southampton, SO17 1BJ, UK 3 ORCA Computing Ltd, 30 Eastbourne Terrace, London W2 6LA, UK *[email protected] Abstract We present a fiber-based source of narrowband heralded single photons in the telecoms C-band. Photon pairs were generated by spontaneous four-wave mixing in photonic crystal fiber (PCF) with a germanium-doped region incorporated into its core for enhanced photosensitivity. A fiber Bragg grating (FBG) with a bandwidth of 0.2 nm and contrast of 17.5 dB was UV-written into the PCF to reflect a sub-nanometre slice of the photon-pair spectrum. This allowed narrowband photons to be heralded at the proximal end of the fiber by detection events after the distal end. We present photon counting data with a coincidence-to-accidental ratio of up to 70. Our source demonstrates a viable route to fiber-integrated narrowband heralded single photon sources suitable for coupling to quantum memories and interfacing heterogeneous qubit types. 1 Introduction Heralded single photon sources have driven rapid progress in photonic quantum technologies for sensing, communication, and computation [ 31 ] . In these sources, photon pairs are typically generated either by parametric downconversion (PDC) or four-wave mixing (FWM) as a laser field propagates through a nonlinear material [ 12 ] . Nonclassical states from PDC are widely used but require second-order nonlinearity, limiting the choice of materials to non-centrosymmetric crystals. FWM, on the other hand, is mediated by third-order nonlinearity, which is present in amorphous materials such as silica. Photon pair generation by FWM can therefore take place in optical fiber [ 5 ] , creating photon pairs in well-defined guided modes that couple efficiently to fiber networks [ 15 , 25 , 29 , 36 ] . FWM photon-pair generation operates at room temperature, allowing the creation of robust all-fiber sources that are readily integrated into rack-based systems. The photon-pair generation process is governed by phase matching, through which dispersion dictates the wavelengths at which efficient photon-pair generation can occur [ 19 ] . Engineering the dispersion, either through the choice of fiber or through structural parameters such as the size and distribution of air holes in microstructured photonic crystal fiber (PCF), enables the central wavelengths of signal and idler photons to be adjusted over hundreds of nanometers through the visible and near infrared. In addition, their bandwidths can be controlled from a few nanometers to over an octave [ 20 ] and the frequency correlation within each pair can be eliminated to produce heralded photons in pure quantum states [ 18 , 7 , 35 , 8 ] . This flexibility, combined with single-mode guidance over the full transparency range of the fiber, makes PCF an attractive platform for photon-pair generation [ 16 ] . However, producing heralded single photons in fiber with bandwidths less than a few nanometres remains an outstanding challenge. This is particularly important when considering interfacing photon-pair sources with atomic or ionic transitions, for example in quantum memories, repeaters, or for entanglement swapping, as photons from both PDC and FWM are typically too broad to couple efficiently to matter-based qubits. While PDC crystals can be integrated into high-finesse cavities to constrain photon-pair generation to narrowband modes [ 32 ] , creating low-loss fiber cavities is not straightforward [ 30 ] . Although dispersion engineering in PCF can be utilised to minimise the phasematched bandwidth of either the signal or idler photon [ 23 , 6 , 14 ] , increasing the fiber length to reduce the bandwidth further ceases to be efficacious beyond the length scale over which the fiber structure varies [ 9 , 17 ] . Fiber Bragg gratings (FBGs), in which a refractive index modulation is inscribed into the core of a fiber to produce a stop band in the transmission, provide a method of addressing narrow regions of the spectrum. FBGs were first written into step-index fiber in 1978 by Hill et al when the photosensitivity of the germanium-doped silica core caused its index to be modified accidentally under illumination by a high-power laser [ 24 ] . Since then, FBGs have become standard, high-performance components in conventional single-mode fiber (SMF). Commercially-available FBGs in SMF are used in various forms including as filters, in spectrometry, and in dispersion compensation. Although FBG inscription has been investigated in a variety of fiber types including PCF, the microstructure within PCF introduces additional challenges when writing FBGs, as a result of reflection and scattering at the air/glass boundaries in the cladding and limited photosensitivity of the pure silica material. FBG writing into PCF was first demonstrated by Eggleton et al in 1999 by including a germanium-doped core and deuterium loading for increased photosensitivity and using a 244 nm laser and phase mask technique [ 11 ] . Since then, different methods and demonstrations have been developed and refined, including phase mask UV techniques [ 21 ] and femtosecond laser writing [ 38 ] . Early demonstrations are well reviewed by Berghmans [ 2 ] and Cusano [ 10 ] . The motivation for this work was the improvement in optical fiber sensors [ 4 , 27 ] as well as for the development of novel fiber lasers [ 22 ] . In this paper, we present a source of heralded single photons in which an FBG is written into PCF to produce single photons with a bandwidth of approximately 0.2 nm in the telecoms C-band. This is acheived by coupling a narrow region of the FWM spectrum to the counterpropagating direction in the fundamental mode of the PCF. In contrast to previous work in which FBGs in conventional fiber were used to selectively reflect narrowband photons from pairs generated by FWM in PCF [ 28 ] , we do not require any narrowband filtering outside the PCF thus eliminating a significant source of loss in the heralded arm. We describe the fiber fabrication and FBG inscription methods, characterisation of the heralded photon bandwidth, and photon-pair count rate data. This demonstrates the utility of FBGs integrated into PCF for narrowband single-photon generation directly in fiber. 2 PCF design and fabrication We target the generation of photon pairs with a signal at approximately 800 nm and and idler around 1550 nm. With a short-pulse pump laser centred at 1064 nm, silica PCF enables us to select the correct dispersion through the cladding hole diameter, d , and pitch, \Lambda , to achieve phase matching between these highly nondegenerate wavelengths. In addition, if we choose a hole-diameter-to-pitch ratio of d/\Lambda<0.4 (the so-called ”endlessly single mode” condition [ 3 ] ), the fiber will guide only the fundamental mode across its full transparency range. However, to create the required photosensitivity for UV FBG inscription, it is necessary to include a Ge-doped region into the core of the PCF. This modifies the fiber dispersion and therefore the phase matching. In addition, it complicates the modelling of the fiber, firstly because the empirical relationships used