Reconfigurable Superconducting Quantum Circuits Enabled by Micro-Scale Liquid-Metal Interconnects Preprint: APS/123-QED

Zhancheng Yao, Nicholas E. Fuhr, Nicholas Russo, David W. Abraham, Kevin E. Smith, David J. Bishop · 2026

Read Reconfigurable Superconducting Quantum Circuits Enabled by Micro-Scale Liquid-Metal Interconnects Preprint: APS/123-QED by Zhancheng Yao, Nicholas E. Fuhr, Nicholas Russo, David W. Abraham, Kevin E. Smith, David J. Bishop (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-09096.txt.

Introduction

Zhancheng Yao and colleagues show that gallium-based liquid metal can link modules in superconducting quantum circuits without harming microwave performance. Such plug-and-play links could ease the yield limits that cap processor size, since faulty modules could be swapped without damage. Their inter-module signal and ground links match standard waveguide resonators and survive three trips between room temperature and deep cold. They also track a width-linked frequency shift and loss that grows at high power.

Catalog record

CREATORZhancheng Yao, Nicholas E. Fuhr, Nicholas Russo, David W. Abraham, Kevin E. Smith, David J. Bishop
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE97288
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.09096

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Reconfigurable Superconducting Quantum Circuits Enabled by Micro-Scale Liquid-Metal Interconnects Preprint: APS/123-QED Zhancheng Yao, Nicholas E. Fuhr, Nicholas Russo, David W. Abraham, Kevin E. Smith, David J. Bishop Abstract Modular architectures are a promising route toward scalable superconducting quantum processors, but finite fabrication yield and the lack of high quality temporary interconnects impose fundamental limitations on system size. Here, we demonstrate chip-scale liquid-metal interconnects that show promise for plug-and-play superconducting quantum circuits by enabling non-destructive module replacement while maintaining high microwave performance. Using gallium-based liquid metals, we realize high-quality inter-module signal and ground interconnects, comparable in performance to conventional coplanar waveguide resonators. We illustrate consistent device characteristics across three thermal cycles between room temperature and 15 mK, as well as the ability to reform superconducting connections following module replacement. A width-dependent resonance frequency shift reveals a significant kinetic inductance fraction, which we attribute to the presence of β \beta -phase tantalum as confirmed by X-ray characterization. Finally, we investigate power-dependent loss mechanisms and observe high-power dissipative nonlinearities qualitatively consistent with a readout-power heating model. These results establish liquid metals as viable chip-scale interconnects for reconfigurable, modular superconducting quantum systems. I Introduction Superconducting quantum circuits are among the most promising platforms for realizing fault-tolerant quantum computation, as demonstrated by recent progress in the preparation of large entangled states 43 and the implementation of quantum error correction 2 . Scaling these systems to practical sizes, however, remains a major engineering challenge. Modular architectures offer a powerful strategy to address this challenge, as different levels of modularity can mitigate distinct bottlenecks in fabrication, packaging, and control 14 . In particular, chip-scale modularity provides an effective route to extending the size of quantum processors while preserving high-fidelity quantum operations. Chip-scale modular approaches, including flip-chip integration, have been widely explored and experimentally demonstrated 34 ; 20 ; 49 ; 86 ; 85 ; 24 ; 70 ; 82 ; 32 . Despite these successes, finite fabrication yield and limited reproducibility impose a hard ceiling on the achievable system size when permanent interconnects are used. A natural path to overcoming this limitation is to enable plug-and-play modularity, in which defective modules can be replaced without discarding the entire system. While several proposed architectures can potentially offer plug-and-play functionality, they typically rely on bulky packaging and long-range multimode cables 63 ; 67 ; 58 ; 87 . These approaches require substantial cryogenic space, introduce additional thermal load, and risk parasitic coupling to adjacent cable modes, all of which may ultimately limit scalability. An appealing alternative is to employ chip-scale, short-range interconnects that preserve plug-and-play capability while avoiding the drawbacks of long-distance wiring. Such interconnects can operate in the single-mode regime, thereby maintaining gate speed and fidelity, and can be implemented with minimal packaging overhead. Achieving these goals, however, requires interconnect technologies that are simultaneously low-loss, reusable, and compatible with cryogenic operation. Liquid metals (LMs), which are liquid at room temperature, have been extensively studied in the context of wearable and stretchable electronics 28 . Gallium-based alloys, such as EGaIn (78.6% Ga and 21.4% In by weight) and galinstan (68.5% Ga, 21.5% In, and 10% Sn by weight), are particularly attractive due to their low toxicity and negligible vapor pressure compared with mercury 28 . Recently, high-quality liquid-metal-bridged coplanar waveguide resonators (CPWRs) have been demonstrated, establishing LMs as viable alternatives to solid galvanic interconnects in superconducting quantum circuits 84 . Moreover, the intrinsic fluid properties of LMs, including self-healing 53 and self-aligning behavior 64 , make them especially well suited for reconfigurable and replaceable interconnects. These properties motivate a modular quantum architecture, illustrated schematically in Fig. 1 , in which chip-scale liquid-metal interconnects enable non-destructive module replacement at room temperature. After system-level testing and warm-up from the milliKelvin regime, defective modules could be removed, leaving residual liquid metal on the contact pads. New modules could then be installed by rebonding to the residual LM, allowing the system to be returned to operation at cryogenic temperatures. This approach provides a promising pathway toward scalable quantum processors without requiring disruptive advances in fabrication technology. In this work, we demonstrate high-quality liquid-metal interconnects that function as both signal and ground interconnects across modular superconducting circuits, with performance comparable to conventional CPWRs. We further investigate the reusability of these interconnects, showing consistent device performance over multiple thermal cycles and the ability to form superconducting connections before and after module replacement. To confirm the fundamental mode of interconnected resonators, we design and observe a width-dependent resonance frequency shift indicative of a significant kinetic inductance fraction, which we attribute to the presence of \beta -Ta based on X-ray characterization. Finally, to elucidate the origin of the high fraction of power-independent loss, we probe high-power dissipative nonlinearities and find qualitative agreement with a readout-power heating model. Figure 1: Example of a modular liquid-metal-enabled quantum system. The qubit chips and interposer chips are connected by superconducting liquid-metal bumps (gray). The adjacent half-bus resonators (cyan meandered line) on the interposer chips are bridged laterally by liquid metal at the chip edges. The qubit chips are self-spaced, self-aligned, and connected/grounded by liquid metal droplets in a flip-chip architecture. The qubit bus resonators (blue meandered line) are capacitively coupled to the qubits (blue parallel bars) and connected to the interposer by liquid metal on the other end. Non-destructive replacement of modules at room temperature is enabled by the liquid nature of the interconnects. II Liquid metal interconnects across modules II.1 Chip assembly design Our tests will be with resonators and use the quality factor as the metric for high performance. To test the LM performance across two modules, we used LM for both signal paths and ground interconnects. Here, we refer to the smaller module at top as chip A, and the larger module at bottom as chip B, shown in Fig. 2 (a). Chip A consists of four halves of lithographically defined half-wavelength ( \lambda/2 ) CPWRs. The other four halves are defined on chip B and later bridge to the ones on chip A using LM. Chip B also includes four \lambda/2 control resonators coupled to one common transmission line (TL). All the superconducting circuits were defined on a 200-nm tantalum layer with a 40-nm titanium nitride passivation layer as shown in Fig. 2 (b). Two halves of LM pad array were patterned on top of Ta/TiN layers. These LM pads are 50- \mathrm{\mu m} wide gold pads with a titanium seed layer and were patterned on the matching edge of the signal path and ground of the LM-bridged CPWRs as shown in Fig. 2 (c). They define the LM interconnect shapes in the later selective LM deposition process as shown in Fig. 2 (e). The distance between the signal LM bumps and their nearest ground LM interconnect affects the frequency of the LM-bridged resonators, so their distance was calibrated to match the designed resonator frequency. An array of 5 \mathrm{\mu m} vortex trapping holes with 25 \mathrm{\mu m} pitch size is distributed across the ground plane. Plentiful wire bonds connect the ground conductors across the CPWRs and to the PCB ground, minimizing crosstalk and slotline modes. No wire bonds were placed across the matching edge in order to emulate the scenario when only LMs connect two chips.

Read the complete text