Nonlinearity Compensation for Coherent Optical Satellite Communications
Stella Civelli, Luca Potì, Enrico Forestieri, Marco Secondini · 2026
Read Nonlinearity Compensation for Coherent Optical Satellite Communications by Stella Civelli, Luca Potì, Enrico Forestieri, Marco Secondini (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-08422.txt.
Introduction
Civelli and colleagues model the fiber Kerr nonlinearity that degrades high-power optical satellite uplinks, where amplifiers must beat free-space loss over long links. The effect differs from long-haul fiber links. To compensate it, they offer low-complexity digital signal processing: constellation shaping through a look-up table, plus a simple nonlinear phase rotation at transmitter or receiver. Simulations claim the tolerated link loss rises by up to 6 dB, and the amplifier itself reduces to one nonlinear phase rotation set by a single characteristic power.
Catalog record
| CREATOR | Stella Civelli, Luca Potì, Enrico Forestieri, Marco Secondini |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 54890 |
| LICENSE | http://creativecommons.org/publicdomain/zero/1.0/ |
| RIGHTS | CC0 |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.08422
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Nonlinearity Compensation for Coherent Optical Satellite Communications Stella Civelli, Luca Potì, Enrico Forestieri, Marco Secondini Abstract Optical satellite uplinks rely on high-power optical amplifiers (HPOAs) to overcome free-space attenuation and enable long-distance transmission. However, at high power levels, fiber Kerr nonlinearity becomes significant and degrades system performance. In this work, we develop a realistic model for optical uplinks that accounts for nonlinear effects and analyze their impact, highlighting key differences from conventional long-haul fiber systems. We then introduce low-complexity digital signal processing techniques for nonlinearity compensation, based on constellation shaping via a look-up table (LUT) and a simple nonlinear phase rotation applied at the transmitter and/or receiver. The LUT also enables adaptive rate tuning according to channel conditions, enhancing robustness against link variations. Simulation results show that the proposed techniques increase the maximum acceptable link loss by up to 6 dB with negligible complexity. Finally, we show that, at the system level, propagation in the HPOA can be modeled as a simple nonlinear phase rotation, equivalent to propagation in a zero-dispersion noiseless fiber link, and fully characterized by a single parameter—the characteristic nonlinear power. I Introduction Recently, optical satellite communication has emerged as an effective technology to complement—and potentially replace—conventional radio-frequency (RF) satellite links [ 1 , 2 , 3 , 4 ] . Ground-to-satellite optical links, however, suffer from severe impairments caused by time-varying atmospheric conditions and by the relative motion between the satellite and the Earth (i.e., varying pointing angle), both leading to significant attenuation and performance degradation. To ensure sufficient received power at the satellite, thereby improving throughput and maintaining resilience under adverse conditions, the launch power should be as high as possible. While free-space optical communications (FSOC) provide several advantages for satellite networks, the ground-to-satellite uplink remains a critical challenge [ 5 ] . Its performance is significantly affected by atmospheric phenomena such as scattering [ 1 ] , molecular absorption [ 3 ] , and turbulence [ 6 ] . Connectivity losses caused by cloud coverage can be mitigated through the use of optical ground station diversity [ 7 ] , and adaptive optics techniques are commonly employed to reduce beam distortions induced by atmospheric turbulence [ 8 ] . However, even with these mitigation strategies, a fundamental asymmetry persists between the uplink and downlink power requirements. This asymmetry arises from the so-called shower curtain effect [ 9 , 10 ] , whereby the impact of a scattering layer depends on its position within the optical path. Since the ground station is located within the atmospheric scattering layer, the uplink is more severely degraded than the downlink, necessitating higher optical transmit power to compensate for atmospheric impairments. Consequently, scaling the optical power of ground station transmitters is a key requirement for achieving high data-rate satellite uplinks. A typical structure used for uplink optical transmission is shown in Fig. 1 , where a standard optical transmitter (TX) prepares the signal and feeds it into a high-power optical amplifier (HPOA), which is required to achieve the high optical power needed for the application. An optical fiber (OF), e.g., an output pigtail or a short optical patch cord, delivers the signal to the optical ground station (OGS), which is used for beam preparation and pointing. In this context, external cavity lasers followed by fiber based HPOA represent a natural choice for OGS transmitters, owing to their capability to deliver high average power while maintaining excellent beam quality. Recently, several HPOAshave been demonstrated, including in-band core-pumped Er-doped fibers [ 11 ] , cladding-pumped Er-doped fibers [ 12 ] , and cladding-pumped ErYb co-doped fibers [ 13 ] . For example, in this paper we will consider as a typical example an HPOA made of an Er-doped fiber with large-core area of length 30 m, with additional 3 m of patch cords, with power up to 100 W. All these approaches exhibit physical and practical constraints or limitations, making custom designs necessary depending on the specific application [ 14 ] . Among the main challenges, fiber nonlinearities invariably arise when a high-power signal propagates through optical fibers—either within the doped fiber inside the amplifier or along the output pigtail or any additional patch cords. Its mitigation is essential to increase the launch power, thereby enabling higher throughput or longer transmission distances [ 15 , 16 ] . On one hand, the nonlinearity can be mitigated by carefully designing the HPOA. For instance, erbium-doped fiber amplifiers (EDFAs) typically require relatively longer doped fiber compared to erbium-ytterbium codoped amplifiers (EYDFAs), making the latter a better options to counteract nonlinear effects. However, very high power EYDFAs suffer from higher-order mode power transfer leading to pointing stability fluctuation as well as long term power degradation due to photodarkening [ 14 ] . Recently, an Er-based HPOA with power up to 50 dBm was proposed, specifically designed to mitigate nonlinear effects; the proposed HPOA combines an EDFA to increase the power up to 27 dBm and a large-mode-area EDFA to further amplify the signal (short fiber with low nonlinear Kerr parameter) [ 17 ] . However, the large-mode-area approach lacks commercially available and reliable components, and maintaining single-mode operation can be challenging. On the other hand, fiber nonlinearity can be mitigated by properly designing the signal and/or using digital signal processing (DSP). For example, the Kerr nonlinearity occurring in a short single-mode fiber (SMF) pigtail following an HPOA has been studied in [ 16 ] , where a compensation method for direct detection systems was proposed. Furthermore, coherent communications have become a reality for space communications, enabling more advanced DSP and higher throughput [ 2 , 18 ] . In this paper, we propose mitigation and compensation techniques for coherent optical satellite communication uplinks, introducing low-complexity DSP methods that enable higher launch power and, consequently, longer transmission distances or higher data rates. Here we extend the work in [ 19 ] providing a detailed model of the channel, a theoretical analysis of the impact of Kerr nonlinearity, and a comprehensive numerical analysis of the performance under different compensation techniques and scenarios. The paper is organized as follows. Section II presents a comprehensive system model and introduces a simplified model that accurately captures the system behavior. Section III proposes two DSP techniques for the compensation of nonlinearity: probabilistic constellation shaping and nonlinear phase compensation (NLPC). Both Sections II and III provide a comparison with long-haul fiber systems, whose nonlinear effects have been thoroughly investigated over the past decades. Section IV presents the system setup and a detailed numerical analysis of the system and the proposed DSP techniques under different conditions. Finally, Section V draws the conclusions. Fig. 1: Ground-to-satellite optical link II System Model Fig. 2: System model We consider a coherent ground-to-satellite optical link, sketched in Fig. 1 . Fig. 2 illustrates the equivalent complex baseband representation adopted throughout this work. The system comprises a ground-based transmitter, a short high-power optical fiber stage including amplification, an FSO link toward the satellite, and a coherent receiver. In the following, each subsystem is described in detail. II-A Transmitter At the transmitter (TX), information bits are mapped by DSP onto a dual-polarization (DP) M -ary quadrature amplitude modulation (QAM) signal with baud rate R . The resulting complex