Anisotropic extension of the Parratt formalism
Szilárd Sajti, László Deák · 2026
Read Anisotropic extension of the Parratt formalism by Szilárd Sajti, László Deák (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-06074.txt.
Introduction
Sajti and Deák derive a Parratt method widened to uneven systems. Neutron and X-ray bounce study looks at thin multilayer systems. Before, the Parratt method covered even systems only. Trait tables can handle uneven problems too, but they suffer number wobbles, which may arise for thick samples at grazing angle hit. The method avoids the number wobbles of the trait table method. Formulae for both bounce-back and pass-through are derived. The new approach proves stable when results from other methods are compared.
Catalog record
| CREATOR | Szilárd Sajti, László Deák |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 95011 |
| LICENSE | http://creativecommons.org/licenses/by-sa/4.0/ |
| RIGHTS | CC BY SA |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.06074
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Anisotropic extension of the Parratt formalism Szilárd Sajti, László Deák Abstract Neutron and X-ray reflectometry are important methods for studying thin multilayer systems. The Parratt method and the method of characteristic matrices, also referred to as transfer matrices, are used for simulation, evaluation of experimental results, and designing optical systems, like mirrors. The Parratt method had been derived for isotropic systems. The method of characteristic matrices can also handle anisotropic problems, but it is burdened with numerical instabilities, which may arise in the case of thick samples at grazing angle incidence. In this paper, we derive a generalized Parratt method applicable to anisotropic systems. Furthermore, as we show, this is devoid of the numerical instabilities arising in the method of characteristic matrices. We derive formulae for both reflectivity and transmissivity. The stability of the new approach is demonstrated by comparing calculated results obtained via different methods. The problem of rough interfaces is also addressed, and the results gained by different approximations for some systems are compared. pacs PACS number I Introduction Reflectometric methods reveal the one-dimensional scattering amplitude density profile normal to a surface. This profile is directly linked to variations in chemical composition, isotopic ratios, magnetic properties, and other characteristics within the depth the radiation penetrates. Consequently, X-ray and neutron reflectometry are widely used to characterize surfaces, thin films, and layered materials 21 ; 20 ; 16 ; 22 ; 30 ; 31 . For non-resonant X-rays or unpolarized neutrons (and non-magnetic samples), the scattering behavior is independent of wave polarization, allowing the layered structure to be modeled using a single complex refractive index. However, when the material exhibits birefringence, polarization-dependent scattering occurs, requiring a more complex, non-scalar optical treatment. In Ref. 8 ; 9 , it has been shown that a common optical formalism exists for the anisotropic neutron and anisotropic nuclear resonant X-ray transmission and reflection for the case of forward scattering and that of grazing incidence. We frequently use transfer matrix methods 1 ; 4 ; 7 ; 34 ; 32 ; 8 ; 5 , also known as the method of characteristic matrices, to evaluate the results of such experiments or to design devices based on these systems. These methods exhibit numerical instability for large systems containing many layers because of exponentially growing terms 14 ; 23 ; 17 ; 18 ; 27 ; 19 . Parratt in Ref. 29 uses a different recursive approach. This is numerically stable according to experience, but it was derived for isotropic layers. In this paper, we demonstrate how this method can be modified for anisotropic layers, in such a way that it is devoid of the numerical instabilities arising from the exponential terms of the transfer matrices. These cases include polarized neutron reflectometry (PNR) and (synchrotron) Mössbauer reflectometry (SMR), the latter is only a special but well-studied case of the anisotropic (resonant) x-ray scattering problem. In the next section, we outline the method of characteristic matrices in the form of Ref. 8 and the basic theoretical assumptions. We briefly review the Parratt method, published in Ref. 29 , in section III . We derive a generalized Parratt method from the method of characteristic matrices applicable to anisotropic systems in section IV . In section V , we will introduce another transfer matrix method and another generalized Parratt method derived from that. This latter generalized Parratt method is the one we implemented and compared with the results of the first transfer matrix method, i.e., the method of characteristic matrices, in section VI . Furthermore, we derive a transmission formula and two analytical approximations for the generalized Parratt method, taking into account the roughness of the interfaces as well, in section V . II Method of characteristic matrices In this section, starting from the general theory of Lax 15 , we shall repeat some general formulae for the scattering of multicomponent waves. Our earlier results are reformulated to make them suitable for applying the method to a generalisation of the Parratt method. For many scattering centers, the coherent field \Psi\left(\mathbf{r}\right) , representing an electromagnetic field vector or quantum mechanical spinor state, fulfills the \left[\left(\Delta+k^{2}\right)\overline{\overline{\mathsf{I}}}+4\pi N\,\overline{\overline{\mathsf{f}}}\right]\Psi\left(\mathbf{r}\right)=\mathbf{0,} (1) three-dimensional wave equation, where k is the vacuum wavenumber, \overline{\overline{\mathsf{I}}} is the 2\times 2 unit matrix, \overline{\overline{\mathsf{f}}} is the coherent forward scattering amplitude, N is the density of the scattering centers per unit volume, and \Psi\left(\mathbf{r}\right) is the coherent field defined by an average of the field vectors over the positions and states of the scattering centers 15 . Eq. ( 1 ) shows that from the point of view of the coherent field, the system of randomly distributed scattering centers can be replaced by a homogeneous medium, with an index of refraction n=I+\frac{2\pi N}{k^{2}}f, where it is exploited that n hardly differs from I for both x-rays and slow neutrons. It is often practical to use the tensor defined by \overline{\overline{\mathsf{\chi}}}= \frac{4\pi N}{k^{2}}\overline{\overline{\mathsf{f}}} 7 , which is the susceptibility in the case of X-rays (represented by a 2\times 2 complex matrix), and \overline{\overline{\mathsf{\chi}}}=\frac{1}{k^{2}}\left[\frac{2m_{n^{0}}}{\hbar^{2}}g\mu_{\mathrm{N}}\mathbf{B}_{\text{eff}}\overline{\overline{\boldsymbol{\sigma}}}-4\pi s\overline{\overline{\mathsf{I}}}\right] (2) for neutrons, where s is the scattering length density, \mathbf{B}_{\text{eff}} is the effective magnetic induction, m_{n^{0}} is the neutron mass, g is the Landé g-factor, \mu_{\mathrm{N}} is the nuclear magneton. In the following, we will also use the name susceptibility tensor in the case of neutrons for practical reasons. Thus, the wave equation for X-ray and neutron reflectometry can be written formally in the same form 8 : \left[\text{\rotatebox[origin,units]{180.0}{$\nabla$}}+k^{2}\left(\overline{\overline{\mathsf{I}}}+\overline{\overline{\mathsf{\chi}}}\right)\right]\Psi(\mathbf{r})=0. (3) By choosing a simple homogeneous layer with the above susceptibility \chi and z axis normal to the layer, one gets the 1D wave equation: \,\mathrm{d}^{2}_{z}\Psi\left(z\right)+k^{2}\sin\theta\left[\overline{\overline{\mathsf{I}}}\sin\theta+\frac{\overline{\overline{\mathsf{\chi}}}}{\sin\theta}\right]\Psi\left(z\right)=\mathbf{0,} (4) with \theta being the grazing angle of incidence. Defining \Phi via \left(\mathrm{i}k\sin\theta\right)\,\,\mathrm{d}_{z}\Phi\left(z\right):=\,\mathrm{d}^{2}_{z}\Psi\left(z\right) , we get a system of first-order differential equations: \frac{\mathrm{d}}{\mathrm{d}z}\left(\begin{array}[c]{c}\Phi\\ \Psi\end{array}\right)=\mathrm{i}k\overline{\overline{\mathsf{M}}}\left(\begin{array}[c]{c}\Phi\\ \Psi\end{array}\right), (5) where \overline{\overline{\mathsf{M}}}=\left(\begin{array}[c]{cc}0&\overline{\overline{\mathsf{I}}}\sin\theta+\frac{\overline{\overline{\mathsf{\chi}}}}{\sin\theta}\\ \overline{\overline{\mathsf{I}}}\sin\theta&0\end{array}\right) (6) is usually called the ”differential propagation matrix” in optics 7 . Eq. ( 5 ) was derived without specifying the scattering process. x z 1. layer 2. layer substrate Figure 1: Multilayer sample and coordinate-system For an arbitrary multilayered film with homogeneous layers of thicknesses d_{1},d_{2},\dots,d_{S-1} and differential propagation matrices \overline{\overline{\mathsf{M}}}_{1},\overline{\overline{\mathsf{M}}}_{2},\dots,\overline{\overline{\mathsf{M}}}_{S-1}, \overline{\overline{\mathsf{\chi}}} in Eq. ( 6 ) is replaced by the susceptibility \overline{\overline{\mathsf{\chi}}}_{l} of layer l (l=1,\dots,S-1) . We have reserved l=0 for the semi-infinite medium of the incident radiation, and l=S for the substrate layer, which we also regard as a semi-infinite medium in the case of reflectometry. The solution of the differential equation ( 5 ) can be expressed in terms of the total characteristic matrix \overline{\overline{\mathsf{L}}}=\overline{\overline{\mathsf{L}}}_{S-1}\cdot\ldots\cdot\overline{\overline{\mathsf{L}}}_{2}\cdot\overline{\overline{\mathsf{L}}}_{1} (7) of the multilayer, where \overline{\overline{\mathsf{L}}}_{l}=\exp\left(\mathrm{i}kd_{l}\overline{\overline{\mathsf{M}}}_{l}\right) (8) is the characteristic matrix of the l^{\text{th}} individual layer. Note that the solution of the linear first-order differential Eq. ( 5 ) means that in a medium l described by the characteristic matrix \overline{\overline{\mathsf{L}}}_{l}, the fields at depth z=0 are connected by the fields at depth z by the relation \left(\begin{array}[c]{c}\Phi\\ \Psi\end{array}\right)\left(z\right)=\overline{\overline{\mathsf{L}}}_{l}\left(\begin{array}[c]{c}\Phi\\ \Psi\end{array}\right)\left(0\right), (9) and the coherent field \Psi , as well as the derived field \Phi must be continuous at each boundary. The 2\times 2 reflectivity matrix \overline{\overline{\mathsf{R}}} is calculated from the total characteristic matrix \overline{\overline{\mathsf{L}}} by \displaystyle\overline{\overline{\mathsf{R}}} \displaystyle=\left[\left(\overline{\overline{\mathsf{L}}}_{\left[11\right]}-\overline{\overline{\mathsf{\gamma}}}_{S}\overline{\overline{\mathsf{L}}}_{\left[21\right]}\right)\overline{\overline{\mathsf{\gamma}}}_{0}-\overline{\overline{\mathsf{L}}}_{\left[12\right]}+\overline{\overline{\mathsf{\gamma}}}_{S}\overline{\overline{\mathsf{L}}}_{\left[22\right]}\right]^{-1} (10) \displaystyle\left[\left(\overline{\overline{\mathsf{L}}}_{\left[11\right]}-\overline{\overline{\mathsf{\gamma}}}_{S}\overline{\overline{\mathsf{L}}}_{\left[21\right]}\right)\overline{\overline{\mathsf{\gamma}}}_{0}+\overline{\overline{\mathsf{L}}}_{\left[12\right]}-\overline{\overline{\mathsf{\gamma}}}_{S}\overline{\overline{\mathsf{L}}}_{\left[22\right]}\right], where \overline{\overline{\mathsf{L}}}_{\left[ij\right]} \left(i,j=1,2\right) are 2\times 2 blocks of the 4\times 4 total characteristic matrix \overline{\overline{\mathsf{L}}} 7 , and the impedance tensors \overline{\overline{\mathsf{\gamma}}}_{l}^{0,r} were introduced by