Topological defects in buckled colloidal monolayers Preprint: APS/123-QED

Aaron L. Galper, Henrik N. Barck, Conor M. Floyd, Elliot A. Snyder, Charlie J. Schofield, Sorin A. P. Jayaweera, Ian G. McGuire, Sharon J. Gerbode · 2026

Read Topological defects in buckled colloidal monolayers Preprint: APS/123-QED by Aaron L. Galper, Henrik N. Barck, Conor M. Floyd, Elliot A. Snyder, Charlie J. Schofield, Sorin A. P. Jayaweera, Ian G. McGuire, Sharon J. Gerbode (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-03813.txt.

Introduction

Aaron L Galper and seven colleagues study the flaws in a crystal made of beads squeezed between plates. Confined to a gap barely wider than one particle, colloids buckle into up or down states, and neighbors prefer opposite states, like antiferromagnetic spins. On the nearly triangular lattice, trios of neighbors frustrate each other: no arrangement satisfies everyone. Their 2026 paper catalogs the topological defects of this two-level order.

Two orders coexist, the positions of the triangular lattice and the up-down spin pattern above it, and each grows its own defects. Both kinds shape grain boundaries and the coarsening of spin domains. The team classifies the spin defects, writes basic rules for their motion, watches dislocations interact with spin defects, and maps which defects drive the coarsening dynamics. The buckled monolayer becomes a laboratory for frustrated, self-assembled matter.

Catalog record

CREATORAaron L. Galper, Henrik N. Barck, Conor M. Floyd, Elliot A. Snyder, Charlie J. Schofield, Sorin A. P. Jayaweera, Ian G. McGuire, Sharon J. Gerbode
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE39098
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.03813

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Topological defects in buckled colloidal monolayers Preprint: APS/123-QED Aaron L. Galper, Henrik N. Barck, Conor M. Floyd, Elliot A. Snyder, Charlie J. Schofield, Sorin A. P. Jayaweera, Ian G. McGuire, Sharon J. Gerbode Abstract When colloidal particles are vertically confined to a gap of between ∼ 1.3 \sim\!1.3 - 1.6 1.6 particle diameters, they pack into buckled crystals of particles in either “up” or “down” states. Neighboring particles tend to occupy opposite states, analogous to the behavior of antiferromagnetic spins. The particles sit on a nearly-triangular lattice, and the spins of trios of adjacent particles are geometrically frustrated. Two levels of translational order exist in this system: that of the underlying triangular lattice in the horizontal plane, and that of the emergent frustrated spin lattice in the vertical dimension. We study the topological defects of both levels of translational order, and we find that both types of defects play a role in crystal grain boundary structure and spin domain coarsening. We classify the spin defects and outline the basic rules for their motion, and we observe interactions between dislocations and spin defects. Finally, we map the phase space of spin coarsening in the buckled monolayer, characterizing which types of defects drive the dynamics. Understanding defect formation, motion, and interaction in the buckled monolayer is the first step in predicting the material properties and aging of this geometrically frustrated, self-assembled system. pacs ’82.70.Dd’ I Introduction If crystalline materials did not contain defects, they could not be deformed, shaped or customized for applications. Understanding crystal defects is crucial to the performance of devices made from crystalline materials; the distribution and motion of defects within crystalline materials determine properties ranging from yield strength to electrical conductivity 24 ; 19 ; 16 ; 15 . The experimental discovery of grain boundaries and dislocations, and the subsequent development of the theory of dislocations in the 20th century, closed holes in our understanding of how crystalline materials deform under stress and how crystalline domains coarsen with age 3 ; 27 ; 6 ; 15 . Experimental studies of defects in colloidal crystals have illuminated a number of fundamental processes such as dislocation glide 28 ; 9 , grain rotation 17 ; 20 ; 2 , work hardening 18 , and the motion of grain boundaries 32 ; 11 ; 4 . Studies of colloidal crystals have provided elegant toy models for investigating statistical mechanical processes that also occur in other crystalline systems such as metals. Figure 1: Frustrated spin order in a buckled colloidal monolayer. (a) Simplified side view schematic of sample with gap height h=\ell D+\Delta z in the z direction, where D is the particle diameter, \ell is the dimensionless looseness parameter, and \Delta z is the “free height” between particle centers of opposite spin particles. In the schematic, the centers of same-spin neighbors are separated by distance f=\ell D along the y direction, while the centers of opposite-spin neighbors are spaced by only u=\sqrt{\ell^{2}D^{2}-(h-\ell D)^{2}} . (b) A buckled monolayer of colloidal particles. Particles pack into one of many ground state domain configurations, consisting of stripe and zig-zag motifs (highlighted in inset). Ground state domains are composed of rows of alternating spins along a single axis, such as the three rows highlighted with yellow lines. The presence of geometric frustration, for example in the classic case of the antiferromagnetic Ising model on a triangular lattice 34 ; 35 can influence crystal strain 14 ; 21 ; 5 ; 12 and therefore the presence and motions of crystal defects. The buckled monolayer is a geometrically frustrated colloidal system that has been previously studied experimentally in colloidal crystals and macroscale models 26 ; 13 ; 36 ; 33 and using theoretical and computational models 30 ; 31 ; 8 . In our buckled monolayer system, a single layer of hard sphere colloidal particles form a nearly triangular lattice in the x - y plane, but each particle has the additional freedom to move slightly up or down in the z direction, bounded by two glass plates separated by a gap of height h\sim 1.3 - 1.6 particle diameters. A side view schematic of a single row of particles within the buckled monolayer is shown in Fig. 1 (a). To pack as efficiently as possible and maximize the entropy, adjacent particles buckle up or down. The ground state configuration for a single line of such particles alternates up and down like spins in a 1D antiferromagnet. By analogy to an antiferromagnetic Ising model, we can identify this alternating pattern as the “spin order” and we call the up/down states “spin.” In a 2D triangular lattice, a particle cannot have opposite spins to all of its neighbors. Consequently, the spin order is geometrically frustrated. Since these frustrated pair interactions cannot be satisfied everywhere on a triangular lattice, there is no single ground state. Instead, particles pack into one of many degenerate ground states, which are composed of parallel lattice lines of alternating spins, as shown in Fig. 1 (b). We find that the frustrated order influences the motion of x - y lattice dislocations (henceforth called “lattice dislocations”) within the buckled monolayer. Notably, the alternating spin order of the ground state causes an anisotropic compressibility of the triangular lattice lines, which impacts lattice dislocation glide. We also identify a new set of topological defects called “spin defects.” These translational defects of the frustrated order of the z coordinates have cores of two adjacent same-spin particles on an otherwise alternating row. Using both experiments and simulations, we find that spin defects form and move as point defects or dislocations on a sublattice of only opposite-spin nearest neighbor edges. Both lattice dislocations and spin defects coarsen regions of ordered spins. We present a phase diagram which indicates where each type of topological defect plays a dominant role in spin coarsening. Understanding these defect processes is the first step in modeling the material properties and time evolution of this frustrated crystalline material, and may serve as a guide to understanding defects in other geometrically frustrated systems. II Buckled colloidal monolayers experimental methods We prepare buckled monolayer colloidal polycrystals using either silica microspheres (diameter D\sim 1.3~\upmu m, Sekisui Micropearl Spacers, Dana Enterprises International, CA) or polystyrene microspheres (diameter D\sim 1~\upmu m, Duke Scientific, Palo Alto CA) suspended in water. We confine the colloidal suspension in a sealed wedge-shaped glass cell as previously described 9 , and tilt the cell to allow the particles to sediment into the gap. The gap height h varies along the length of the cell, filtering out any larger particle clusters, yielding a monodisperse flat monolayer crystal at h=D and a buckled monolayer where h\in[1.3D,1.6D] . Larger gap heights yield square packing crystal structures, and then buckled multilayers as previously described 26 . In the buckled monolayer region, the particles pack with average center-to-center separation \ell D , where D is the particle diameter and \ell is a dimensionless looseness parameter that varies between \sim\!1.03 - 1.08 in our experiments. We observe the buckled monolayer using an inverted light microscope. Because of the wedge-shaped cell, the buckled monolayer is imperfectly aligned with the focal plane; we correct this misalignment using a custom adjustable microscope stage plate, as

Read the complete text