Influence of stacking, coordination, and surface chemistry on Al intercalation in V
2 · 2026
Read Influence of stacking, coordination, and surface chemistry on Al intercalation in V by 2 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-03133.txt.
Introduction
How a two-dimensional sheet stacks and what coats its surface decide whether aluminum ions can move in and out. This 2026 study uses density functional theory, a quantum simulation method, to test MXene materials as cathodes for aluminum-ion batteries. The candidates, two layered carbides, offer wide interlayer spacing and strong conductivity beyond lithium chemistry.
Four stacking arrangements and two ion sites were compared. Oxygen-coated layers in one stacking stayed remarkably stable, with the vanadium carbide barely swelling as aluminum entered, matching experiments. That stable stacking slowed ion motion compared with the alternative arrangement. Oxygen coatings also promised high storage capacity, while fluorine coatings destabilized badly after ion entry. The findings give battery designers concrete rules for tuning these sheets.
Catalog record
| CREATOR | 2 |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 42398 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2603.03133
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Influence of stacking, coordination, and surface chemistry on Al intercalation in V 2 Abstract As the energy storage ecosystem evolves beyond lithium, MXenes, a versatile family of 2D materials derived from MAX phases, have emerged as promising candidates for next-generation energy storage electrodes due to their tunable surface chemistry, large interlayer spacing, and excellent electronic conductivity. In this work, we use density functional theory to investigate Ti 3 C 2 and V 2 C MXenes as cathodes in Al-ion batteries. Four stacking configurations of the two-dimensional sheets and two different ion coordination sites are evaluated to understand their influence on ion intercalation and mobility. We find that the stacking configuration and surface chemistry critically impact interlayer spacing and electrochemical performance. O-terminated layers in an octahedral stacking exhibit remarkable structural stability with minimal interlayer expansion upon ion intercalation, particularly for Al intercalation in V 2 C which exhibits an interlayer expansion of 0.1 Å, consistent with experimental findings. While octahedral stacking is observed to be energetically more favourable, it reduces ion mobility compared to prismatic stacking. Furthermore, O-terminated MXenes exhibit high theoretical specific capacities, reaching more than 270 mAh/g. F-terminated MXenes are considerably more unstable after intercalation and as a result exhibit much lower Al capacities. These findings highlight the importance of stacking configurations, termination and intercalant chemistry in MXenes for battery applications. † † footnotetext: a School of Physics, University College Dublin, Dublin 4, Ireland; E-mail: [email protected] † † footnotetext: b Centre for Quantum Engineering, Science, and Technology, University College Dublin, Dublin 4, Ireland. 1 Introduction Lithium-ion batteries (LIBs) are the dominant technology in the battery market, outperforming other battery types in terms of energy density, power density, cycle life, and self-discharge, while also avoiding memory effects. However, LIBs also suffer from certain limitations, including the high cost per unit energy stored, limited cycle life, voltage degradation, oxidation, and safety risks associated with thermal runaway. Additional challenges arise from the uneven global distribution of scarce lithium resources, as well as the significant environmental and human costs of lithium mining 8 . Global technological trends are driving the need for energy systems with even greater performance capabilities. The European Union’s Battery Strategy Action Plan and the Battery 2030+ Roadmap set ambitious targets for energy storage technologies, with a steady scale-up towards the TWh range 11 and a target cell-level energy density of at least 500 Wh/kg 33 . Meeting these targets will require fundamental breakthroughs in battery systems, with improvements in specific energy, volumetric energy density, cycle life, charge/discharge rates, stability, and safety all considered essential. Alternative charge carries such as monovalent Na and K, as well as multivalent Mg, Ca, Zn, and Al, have the potential to alleviate pressure on lithium resources and, in some cases, surpass the performance of LIBs. Like lithium, these systems typically rely on the reversible intercalation of metal ions into host electrode materials, a process that enables charge storage and release. Among these, sodium-ion batteries (SIBs) are considered particularly promising as either a complement to, or replacement for, LIBs, due to their compatibility with similar electrode materials and electrolyte formulations, which would facilitate a relatively straightforward transition 7 . In addition, sodium is more abundant and presents a lower risk of thermal runaway. However, its larger atomic radius and higher specific weight result in a lower theoretical capacity and energy density, limiting the applicability of SIBs to certain use cases 10 . The use of Mg and Al as pure metal anodes offers the potential for both high gravimetric and volumetric capacities. For Mg, the theoretical gravimetric and volumetric capacities are 2205 mAh g -1 and 3833 mAh cm -3 respectively – substantially higher than those of the graphite anodes used in LIBs, which only deliver 372 mAh g -1 and 800 mAh cm -3 6 . Furthermore, magnesium is at least four times abundant in the Earth’s crust than lithium. It also offers advantages such as safer handling, a reduced propensity for dendrite formation, and the avoidance of toxic by-products 49 . Research into Al-ion batteries (AIBs) remains at an early stage; however, the use of an aluminium metal anode offers even higher theoretical gravimetric and volumetric capacities of 2980 mAh g -1 and 8040 mAh cm -3 , making it one of the most promising candidates among all metal-ion battery systems 13 . In addition, the abundance of aluminium in the Earth’s crust would contribute to significantly lower production costs compared to lithium-based systems 48 . Although the reversible intercalation of Mg, Ca, and Al metal ions could theoretically enable capacities double or even triple those of LIBs, practical challenges related to electrolyte and cathode selection currently limit the maximum achievable energy density 12 . The main drawbacks of existing electrode materials include significant volume expansion upon ion intercalation, which leads to structural degradation; strong host-guest interactions that hinder ion mobility; intrinsic hydrophobicity; and low electrical conductivity 37 . Layered MXene materials are promising candidates as electrodes for post-LIB technologies. MXenes are a family of layered two-dimensional (2D) transition metal carbides, nitrides and carbonitrides that feature large interlayer spacings and high surface areas. They also exhibit electrical conductivities comparable to graphene, excellent thermal stability, stiffness surpassing that of steel, and rich surface chemistries 31 . Experimental studies have demonstrated that MXenes can deliver high volumetric capacities when intercalated with a variety of monovalent and multivalent cations 28 , 41 , 21 . Among them, V 2 C stands out as showing particular promise as an Al-ion battery cathode, having demonstrated a high reversible capacity attributed to Al 3+ ion intercalation between its layers 44 due to the remarkably minor increase in interlayer spacing during the intercalation process. Furthermore, exceptional specific capacities exceeding 300 mAh g -1 at high charge/discharge rates were demonstrated in delaminated V 2 CT 2 . Despite these impressive electrochemical performances – among the best reported for aluminium-ion battery cathodes – important questions remain unresolved at the atomic scale. In particular, the detailed mechanism of Al 3+ intercalation, the origin of a gradual capacity fade observed during cycling, and the factors controlling ion transport and structural stability remain to be fully understood. In addition to their compositional diversity, MXenes exhibit variations in their interlayer stacking arrangements and surface terminations, both of which can strongly influence ion intercalation and charge storage behavior. Surface terminations — typically –O, –OH, or –F groups introduced during synthesis — modify the local electronic structure and binding characteristics of the MXene surfaces 38 , 20 , 47 , while the stacking of adjacent layers determines the accessible interlayer spacing and diffusion pathways for intercalating ions 45 . In this study, we investigate how these structural and surface termination factors affect ion intercalation in two representative multilayered MXenes: Ti 3 C 2 , the prototypical and most extensively studied MXene, and V 2 C, which, as previously mentioned, has shown promise as a Al-ion battery cathode 44 . Aluminium-ion intercalation is of primary interest, but for comparison and broader insight, we also examine Na and Mg intercalation, to explore how intercalation energetics evolve from monovalent Na + to trivalent Al 3+ . Using density functional theory, we access atomic-scale properties and mechanisms that are challenging to resolve