A Vibrated Compacting Granular System: A DEM Light Scattering Comparison

Linnea Heitmeier, Jan Gabriel · 2026

Read A Vibrated Compacting Granular System: A DEM Light Scattering Comparison by Linnea Heitmeier, Jan Gabriel (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-01921.txt.

Introduction

Linnea Heitmeier and Jan Gabriel simulate a shaken box of plastic spheres and compare it with light-scattering experiments. Their 2026 work vibrates polystyrene spheres inside a cubic container at varied shaking strengths. Packing fraction tracks how densely the grains settle as shaking proceeds over time.

Simulations use the Discrete Element Method, which follows each grain and its contacts directly. Mean-squared displacement reveals whether grains diffuse normally, crawl subdiffusively, or surge superdiffusively. Simulated displacements run far above the values measured by diffusing wave spectroscopy in the lab. Rotational displacement, though, matches the measured scale closely, which flips the usual reading of the signal. The authors propose the lab signal reflects rotation, not translation, and note the system locks into a constrained state well before close packing.

Catalog record

CREATORLinnea Heitmeier, Jan Gabriel
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE22967
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.01921

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

A Vibrated Compacting Granular System: A DEM Light Scattering Comparison Linnea Heitmeier, Jan Gabriel Abstract We perform Discrete Element Method (DEM) simulations of granular particles (polystyrene spheres) vibrated inside a cubic container. The study investigates the evolution of the packing fraction with and without rotational friction at different shaking amplitudes. The mean-squared displacement (MSD) is used to analyze the particles’ diffusive, subdiffusive, and superdiffusive behavior. By monitoring both the dynamics and density evolution, one can observe the system’s glassification. The comparison with experiments shows that the MSDs from the simulations are significantly higher than the MSDs measured by Diffusing Wave Spectroscopy (DWS) 34 . Following our finding that the rotational MSD is of the same order of magnitude as the MSD measured in DWS experiments, we propose that the experimental signal is not dominated by translational motion but rather by rotational particle dynamics. This provides access to a relevant particle property that has previously been difficult to measure directly. Finally, we conclude that the system reaches a dynamically constrained state well before random close packing, with particle displacements already below the Lindemann length. I Introduction Granular matter is ubiquitous in nature and industry; examples include snow, nuts, coal, and rice 27 ; 15 ; 14 ; 47 . It also plays a central role in applications such as powder-based additive manufacturing, where the flow properties of the filament, a granular matter, are of high importance for the resulting printing quality 55 ; 48 ; 3 . Earlier studies have shown that dense granular matter exhibits behavior comparable to that of dense liquids and glass-forming systems 36 ; 59 ; 6 ; 51 ; 60 ; 4 . Similar to glassy systems, even small changes in packing fraction can lead to significant changes in the dynamics of the system. In contrast to molecular and colloidal fluids, where thermal fluctuations provide a natural source of energy, granular systems are athermal. Hence, energy must be supplied externally. A common method is mechanical vibration. Experimentally, vibrated granular systems have been investigated in Refs. 34 ; 42 ; 32 ; 49 ; 19 ; 33 ; 45 ; 31 ; 46 ; 40 . Although several simulations of such setups have been reported 17 ; 21 ; 13 ; 24 , they do not allow for a direct comparison with our experimental results. Since these simulations did not simultaneously determine the compaction, the mean-squared displacement, and the rotational MSD. In this work, we address this gap by performing Discrete Element Method (DEM) simulations of a vibrated granular system inspired by a light-scattering experiment using Diffusing Wave Spectroscopy (DWS) on 140 µm polystyrene spheres shaken at 100 Hz inside a cubic container (4 mm 3 ) 34 . A puzzling observation in the experiment is that the extracted mean squared displacements (MSDs) suggest caging lengths of only 0.07% of the particle diameter 34 . Similar results are found in densification experiments on 140 µm polystyrene spheres under low gravity on board the ISS 42 . The densification process is monitored by the MSD extracted by DWS and implies earlier glassification and jamming under low gravity. The low caging lengths are not in line with Mode-Coupling Theory (MCT) predicted caging at approximately 10% of the particle diameter 54 ; 53 following the melting concept related to the Lindemann length 35 . This opens the question, also relevant to other DWS experiments 43 ; 44 ; 7 ; 23 ; 22 ; 30 ; 29 ; 61 ; 8 , if the DWS Method is truly measuring the translational dynamics in these cases. F_{g} (A,\omega) Figure 1: Schematic representation of the simulation setup after sedimentation. The gravitational force F_{g} acts downward, while the container walls oscillate vertically with amplitude A and angular frequency \omega . To resolve this discrepancy, we monitor the packing fraction as well as the translational and rotational MSDs during the shaking process. While translational MSDs are commonly studied, rotational MSDs are less frequently reported; examples can be found in Refs. 18 ; 49 . We discuss the role of rotational friction in determining the rotational MSD and address the challenges associated with densifying the system when rotational friction is included in the simulations. In the experiment, the particles densify up to packing fractions of 62% 34 , consistent with reported values for random close packing in systems with friction 52 ; 28 ; 37 . We analyze the diffusive, subdiffusive, and superdiffusive regimes observed in the calculated MSDs and discuss their relation to the MSDs extracted from DWS measurements 34 and there experimental implications for other DWS experiments like the densification experiment under low gravity on board the ISS 42 . II Method Discrete Element Method (DEM) simulations were performed using the open-source molecular dynamics software LAMMPS 56 . The interactions between particles were modeled using a Hookean contact law, where particles experience a force only when they overlap. The corresponding pairwise force between particles i and j is given by 9 ; 52 ; 59 : \displaystyle\mathbf{F}_{\text{Hooke}}=(k_{n}\,\delta\,\mathbf{n}_{ij}-m\,\gamma_{n}\,\mathbf{v}_{n})-(k_{t}\,\Delta\mathbf{s}_{t}+m\,\gamma_{t}\,\mathbf{v}_{t}), (1) where \delta is the overlap between two particles, k_{n} and k_{t} denote the elastic constants in the normal and tangential directions, respectively, and \gamma_{n} and \gamma_{t} are the corresponding damping coefficients. The variable m represents the particle mass, while \mathbf{v}_{n} and \mathbf{v}_{t} are the normal and tangential components of the relative velocity. The vector \Delta\mathbf{s}_{t}=\int dtv_{t} accounts for the tangential displacement between two particles and includes the history of tangential contacts. We applied the static yield criterion x_{\mu} , which limits the tangential force by F_{t}\leq x_{\mu}F_{n} . If not mentioned otherwise, it is set to 0. The case of x_{\mu}=0 is called the frictionless case, while the case of x_{\mu}\neq 0 is called the frictional case. Initially, N particles were placed randomly within a rectangular box of dimensions L_{x}\times L_{y}\times L_{z} . A gravitational force of magnitude mg was applied in the negative z -direction to induce particle settling and segregation. The boundaries of the simulation box were modeled as walls interacting with the particles through the same Hookean potential, but with different interaction parameters (see Table 1 ). The setup after the sedimentation is illustrated in Figure 1 . Subsequently, a sinusoidal excitation was imposed by oscillating all walls with amplitude A and angular frequency \omega , such that the z -position of the walls w_{z} at time t was given by \displaystyle w_{z}(t)=w_{z}(0)+A\sin\left(\frac{2\pi t}{\omega}\right) (2) During the shaking process, we monitored the evolution of the packing fraction and the mean-squared displacement (MSD). For the system with non-vanishing tangential forces, we also tracked the rotational mean-squared displacement (rMSD). The packing fraction \phi was determined as the ratio of the volume occupied by the particles and the ”effective” volume, defined by the minimal and maximal particle coordinates in each direction: \displaystyle\phi=\frac{V_{\text{particles}}}{V_{\text{total}}} (3) We checked that the results we obtain from this method are consistent with an alternative approach, which calculates the density of the system in dependence on the z -coordinate. The translational mean-squared displacement was calculated as \displaystyle\text{MSD}(t+\Delta t)=\langle\,|\mathbf{r}(t+\Delta t)-\mathbf{r}(t)|^{2}\,\rangle, (4) where \mathbf{r}(t) denotes the particle position at time t , and the brackets \langle\cdot\rangle indicate an ensemble average over all particles. For the calculation of this quantity, we used the built-in methods

Read the complete text