Operational Modal Analysis of Aeronautical Structures via Tangential Interpolation

Gabriele Dessena *, Marco Civera, Oscar E. Bonilla-Manrique · 2026

Read Operational Modal Analysis of Aeronautical Structures via Tangential Interpolation by Gabriele Dessena *, Marco Civera, Oscar E. Bonilla-Manrique (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2603-01359.txt.

Introduction

Dessena, Civera, and Bonilla-Manrique study working modal analysis of aircraft frames via sideways filling, coupling the Loewner Framework with NExT to yield the NExT-LF method. The method exploits Loewner speed from sideways filling plus impulse response recovery enabled by NExT, easing Stochastic Subspace Identification burden on large systems and NExT-ERA noise struggles. NExT-LF is tested on lab benchmarks including the eXperimental BeaRDS 2 high-aspect-ratio wing main spar.

Catalog record

CREATORGabriele Dessena *, Marco Civera, Oscar E. Bonilla-Manrique
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE58179
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2603.01359

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Operational Modal Analysis of Aeronautical Structures via Tangential Interpolation Gabriele Dessena *, Marco Civera, Oscar E. Bonilla-Manrique Abstract Over the last decades, progress in modal analysis has enabled increasingly routine use of modal parameters, including those extracted from in-situ measurements, for applications such as structural health monitoring and finite element model updating. For output-only identification, or Operational Modal Analysis (OMA), widely adopted approaches include Stochastic Subspace Identification (SSI) methods and the Natural Excitation Technique combined with the Eigensystem Realization Algorithm (NExT-ERA). Nevertheless, SSI-based techniques may become cumbersome on large systems, while NExT-ERA fitting can struggle when measurements are contaminated by noise. To alleviate these, this work investigates an OMA frequency-domain formulation for aeronautical structures by coupling the Loewner Framework (LF) with NExT, yielding the proposed NExT-LF method. The method exploits the computational efficiency of LF together with the impulse response function retrieval enabled by NExT. NExT-LF is assessed on two experimental benchmarks: the eXperimental BeaRDS 2 high-aspect-ratio wing main spar and an Airbus Helicopters H135 bearingless main rotor blade. The identified modal parameters are compared against available experimental references and results obtained via SSI with Canonical Variate Analysis and NExT-ERA. The results show that the modes identified by NExT-LF correlate well with benchmark data, particularly for high-amplitude tests and in the low-frequency range. keywords Tangential Interpolation; Operational Modal Analysis; Loewner Framework, High-Aspect-Ratio Wing; Aeronautical Structure; Natural Excitation Technique; Wing Spar; Helicopter Blade; Airbus Helicopters H135. † † firstpage: 1 † † volume: 1 † † issue: 1 † † articlenumber: 0 † † year: 2026 † † copyright-year: 2026 † † authornames: Firstname Lastname, Firstname Lastname and Firstname Lastname † † address: 1 Department of Aerospace Engineering, Universidad Carlos III de Madrid, Avenida de la Universidad 30, Leganés, 28911, Madrid, Spain; [email protected] (G.D.) 2 Department of Structural, Geotechnical and Building Engineering, Politecnico di Torino, 10129, Turin, Italy; [email protected] (M.C.) 3 Electronic Technology Department, Universidad Carlos III de Madrid, Avenida de la Universidad 30, Leganés, 28911, Madrid, Spain; [email protected] (OE.BM.) † † corresponding: Correspondence: [email protected] (G.D.) † † firstnote: This is an extended version of the paper ( Tangential interpolation for the operational modal analysis of aeronautical structures by Gabriele Dessena, Marco Civera, and Oscar E. Bonilla-Manrique) accepted in Proceedings of the 15 th EASN International Conference on Innovation in Aviation & Space Towards Sustainability Today and Tomorrow, Madrid, Spain, 14–17 October 2025. † † reftitle: References 1 Introduction Modal analysis is a key tool for characterising the structural dynamics of engineering systems Ewins 2000 . It can be performed in an input-controlled experimental setting or by measuring a structure in situ , either during operation or at rest (Ambient Vibration Testing – AVT), without the application of an external controlled input. The former is referred to as Experimental Modal Analysis (EMA), whereas the latter is known as Operational Modal Analysis (OMA) Brincker and Ventura 2015 . In OMA, which is the focus of this work, the objective is to extract modal parameters Reynders 2012 —natural frequencies ( \omega_{n} ), damping ratios ( \zeta_{n} ), and mode shapes ( \bm{\phi}_{n} )—to describe the dynamic behaviour of a structure for purposes including Finite Element Model (FEM) updating Zanotti Fragonara et al. 2017 and Structural Health Monitoring (SHM) Cadoret et al. 2025 . In aeronautical and aerospace engineering, OMA is employed in a broad range of applications. For instance, Jelicic et al. 2014 uses OMA results to track flutter stability in real time for a wind-tunnel wing model, while Sinske et al. 2017 reports in-flight aeroelastic identification for the German Aerospace Center (DLR) HALO research aircraft. OMA has also been applied during launch-vehicle rollout operations, as reported for Artemis I in Akers et al. 2025 , and to extract modal characteristics from in-flight data for launch vehicles and missiles in Eugeni et al. 2018 and James et al. 1994 , respectively. Rotorcraft applications are also well established: Ameri et al. 2013 applies OMA to Ground Vibration Testing (GVT) data from a Westland Lynx Mark 7 helicopter airframe, while Sibille et al. 2023 and Agneni et al. 2010 identify time-expired helicopter blades from an Airbus Helicopters H135 and an Agusta-Bell AB 204, respectively. Traditional OMA techniques include the Natural Excitation Technique (NExT) paired with the Eigensystem Realization Algorithm (ERA), commonly denoted as NExT-ERA James III et al. 1993 , Stochastic Subspace Identification with Canonical Variate Analysis (SSI-CVA) Van Overschee and De Moor 1996 , and Frequency Domain Decomposition (FDD) Brincker et al. 2001 . NExT-ERA and SSI-CVA are time-domain approaches, whereas FDD operates directly in the frequency domain. Recent developments have aimed at improving robustness to measurement noise and supporting consistent mode selection. For example, O’Connell and Rogers 2024 ; O’Connell et al. 2025 propose a robust COVariance-driven SSI (SSI-COV) formulation incorporating a probabilistic criterion to reduce the likelihood that outliers are misinterpreted as physical modes. With a related objective, Amador and Brincker 2024 introduces a subspace-based poly-reference complex frequency approach to reduce uncertainties associated with the null space of the system matrices used in the identification process, by adopting a subspace-driven parametric formulation and estimating modal properties via eigensystem realisations across selected subspaces. Another SSI-based development couples SSI-COV with Fuzzy C-Means (SSI-FCM) clustering to reject spurious modes in stabilisation diagrams, and has been demonstrated on a train bogie and a five-storey experimental structure in Lv et al. 2026 . Furthermore, the Multi-Reference Transmissibility Complex Frequency method is proposed in Tarinejad and Amanzad 2026 to address bias errors related to the application of the Fast Fourier Transform (FFT) to non-stationary signals, although validation is limited to numerical systems. Finally, NExT combined with Dynamic Mode Decomposition (DMD) is introduced for SHM of aeronautical structures in Wu et al. 2026 , building on the DMD formulation for experimental modal analysis in Saito and Kuno 2020 , which in turn extends the original DMD framework for extracting coherent features in fluid flows Schimid 2010 . In parallel, automated OMA frameworks (AOMA) have been proposed to streamline the identification process, including machine learning-based strategies Mugnaini et al. 2022 , hierarchical clustering Neu et al. 2017 , k-means clustering de Almeida Cardoso et al. 2018 , and Density-Based Spatial Clustering of Applications with Noise (DBSCAN) Sibille et al. 2023 . AOMA is outside the scope of this work, and the interested reader is referred to Mostafaei and Ghamami 2025 for a recent review. Within this broader context, the frequency-domain Loewner Framework (LF) has been considered for EMA Dessena et al. 2023 and subsequently extended to output-only identification in civil engineering by pairing it with NExT, yielding the NExT-LF approach Dessena et al. 2025 . The aim of this coupling is to exploit the computational efficiency of the LF fitting processs while retaining the output-only capability provided by NExT. These characteristics make NExT-LF attractive for aeronautical applications, where datasets can be large and measurements may be affected by operational noise. To address this gap, the present work investigates NExT-LF on two aeronautically relevant experimental datasets: the eXperimental BeaRDS 2 (XB-2) flexible wing spar model Dessena et al. 2022 and an Airbus Helicopters H135 Bearingless Main Rotor (BMR) blade Weber et al. 2021 . The two datasets are selected due to their different levels of complexity in terms of system dimensions

Read the complete text