Beam tube boundary effects in stray light modeling of long Fabry–Perot arm cavities for third-generation gravitational-wave detectors

M. Andrés-Carcasona, M. Evans · 2026

Read Beam tube boundary effects in stray light modeling of long Fabry–Perot arm cavities for third-generation gravitational-wave detectors by M. Andrés-Carcasona, M. Evans (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2602-21303.txt.

Introduction

Third-generation gravity-wave catchers will run very long arm hollows inside vacuum beam tubes, but standard modeling tools treat travel in free space. M. Andres-Carcasona and M. Evans add tube edges to the picture in this 2026 arXiv paper, with a wave-guide-like mode account of the optical field. Modal-mixing grids for mirrors and baffles follow, including a closed-form series for round holes.

Strain-matching couplings from baffle off-centering and a pinned near-wall defect are measured, and both shrink as baffle density grows. In densely baffled hollows with small nudges, tube edge effects prove minor. The result backs ongoing use of free-space modeling codes for building next-generation catchers, with a stand-alone yardstick in hand.

Catalog record

CREATORM. Andrés-Carcasona, M. Evans
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE60 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2602-21303

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Beam tube boundary effects in stray light modeling of long Fabry–Perot arm cavities for third-generation gravitational-wave detectors M. Andrés-Carcasona, M. Evans Abstract Next-generation gravitational-wave detectors such as Cosmic Explorer and the Einstein Telescope will operate 10–40 km Fabry–Perot arm cavities inside vacuum beam tubes. FFT-based paraxial tools treat propagation in free space and therefore do not explicitly enforce beam tube boundary conditions. We introduce a waveguide-like mode description of the optical field that incorporates an imposed beam tube boundary condition and enables an independent benchmark of free-space FFT tools We derive the associated modal-mixing matrices for mirrors and baffles, including a closed-form series for axisymmetric circular apertures. We quantify the strain-equivalent couplings from baffle miscentering and from a localized near-wall tube defect, and show that they are suppressed as baffle density increases. In the relevant regime of densely baffled cavities and small perturbations, beam tube boundary effects are subdominant, which supports the continued use of FFT-based codes to guide the design of 3G detectors. I Introduction Scattered light, also known as stray light, arises from photons that deviate from the intended path due to scattering off surfaces, and is a critical noise source in gravitational wave (GW) detectors 2 ; 12 ; 33 ; 29 ; 17 ; 18 ; 19 ; 5 ; 20 ; 6 ; 26 ; 27 ; 8 ; 9 . Such stray light can recombine with the resonant laser field, introducing both phase and amplitude noise that may significantly degrade the detector sensitivity. This effect is particularly problematic because it can couple to the mechanical motion of non-optical components, resulting in low-frequency noise artifacts that are difficult to model or mitigate using standard isolation techniques 21 . To control scattered light, GW detectors employ baffles and beam dumps to absorb or redirect unwanted photons. These components are carefully manufactured so that the reflection and scattering of light is reduced. For next-generation detectors, with longer propagation baselines and higher expected sensitivity, the design must ensure that scattered light does not limit the detector performance. In the absence of full-scale prototypes, the design and selection of stray light mitigation strategies must be guided primarily by modeling. This implies that modeling tools must be systematically verified and validated by benchmarking between independent numerical approaches, analytic limits, and, where available, experimental data from current detectors or dedicated test measurements. Current approaches to scattered-light modeling in GW detectors rely mostly on ray-tracing simulations, fast Fourier transform (FFT) codes, and simplified analytical approximations, combined with empirical measurements 29 ; 4 . Ray-tracing methods can accommodate very complex geometries, at the expense of substantial computing resources, as they must simulate a sufficiently large number of photon trajectories to extract statistically significant conclusions. By contrast, FFT-based codes can compute the field at an arbitrary position along these long FP cavities, but complex geometries cannot be included, as they rely on propagating the field in free space under the paraxial approximation. One of these FFT codes is the Stationary Interferometer Simulation (SIS) package 25 , which has been tested against modal-expansion methods and compared with photodiode measurements in LIGO and with an instrumented baffle in Virgo 32 ; 31 ; 6 ; 26 ; 27 ; 8 . Third-generation (3G) GW detectors, such as the Einstein Telescope (ET) 10 ; 11 and Cosmic Explorer (CE) 1 ; 24 ; 23 , will require very long FP cavities of 10 km and 40 km, respectively. Longer baselines and tighter noise budgets increase the sensitivity to stray-light noise, requiring more accurate modeling to guide the design. In the main FP cavities, the primary tool currently used to inform the baffle layout is SIS for both observatories 4 ; 7 ; 3 . An open question is whether, for the larger baffle separations expected in 3G designs, interactions with the surrounding vacuum beam tube remain negligible. This point is particularly relevant because FFT-based propagation does not impose beam tube boundary conditions and if wall interactions are non-negligible, SIS predictions may be inaccurate. In this work we provide an independent benchmark of SIS in the specific regime relevant to 3G arm-cavity baffle design. Our approach introduces a waveguide-like modal description that enforces an imposed beam tube boundary condition while remaining computationally tractable over 40 km propagation lengths. This enables a direct comparison of steady-state intracavity fields between a model that is aware of the beam tube and the free-space one, and a systematic assessment of when beam tube interactions can be safely neglected. We find that, for baffled cavities with CE-like parameters, the beam tube boundary primarily affects the large-radius tail of the field, while the resonant field within the mirror aperture and the noise couplings relevant for small baffle motion are largely unchanged. Additionally, we show that baffles inside the cavity act as spatial filters that progressively suppress the diffractive halo and reduce the field incident on the beam tube, making this boundary effect less relevant. As a result, SIS remains a reliable tool for guiding baffle layout studies in the densely baffled, small-perturbation regime targeted by current 3G designs. Modal decomposition techniques for scattered-light studies have been explored in the literature. For example, Refs. 31 ; 32 use Hermite–Gauss (HG) and Laguerre–Gauss (LG) modes to model stray light generated by finite baffle apertures within the paraxial, free-space context. In contrast, the waveguide-like basis introduced here incorporates an imposed beam tube boundary condition, allowing a direct benchmark against free-space FFT propagation in the regime of long baselines relevant to 3G detectors. The remainder of this paper is organized as follows. In Sec. II , we present a summary of set of modes employed in this work. Section III explains how to obtain the steady-state field and how noise couplings can be computed. Finally, in Sec. IV , we perform numerical experiments with a CE-like cavity to evaluate the limitations of current FFT-based tools. The mathematical details and some numerical considerations are presented in the Appendix. II Waveguide-like modes We consider the propagation of a collimated and coherent laser beam in vacuum and work in the monochromatic regime. Under a fixed polarization, the field satisfies the scalar Helmholtz equation: \nabla^{2}\psi+k^{2}\psi=0\,, (1) where \psi is the complex valued function that describes the field and k is the wavenumber and is related to the wavelength of the laser \lambda as k=2\pi/\lambda . In many applications, the scales in the beam propagation direction are much bigger than those in the transverse plane, and the paraxial approximation is used 28 . Under this approximation and vacuum conditions the field is usually well-described by a Gaussian beam. This beam is characterized by a Gaussian transverse intensity distribution and by an evolution that smoothly varies during its propagation. The field can be expressed as \psi(x,y,z)=\sqrt{\frac{2}{\pi w(z)^{2}}}\exp\!\Biggl[-ikz\\ -ik\frac{x^{2}+y^{2}}{2R(z)}+i\varphi_{g}(z)-\frac{x^{2}+y^{2}}{w(z)^{2}}\Biggr]\,, (2) where the beam size w(z) , the wavefront radius of curvature R(z) , and the Gouy phase \varphi_{g}(z) are given by \displaystyle w(z) \displaystyle=w_{0}\sqrt{1+\left(\frac{z}{z_{R}}\right)^{2}}, (3) \displaystyle R(z) \displaystyle=z\left[1+\left(\frac{z_{R}}{z}\right)^{2}\right], (4) \displaystyle\varphi_{g}(z) \displaystyle=\arctan\!\left(\frac{z}{z_{R}}\right), (5) with the Rayleigh range defined as z_{R}=\pi w_{0}^{2}/\lambda and w_{0} denoting the beam waist size, reached at z=0 . In real-world experiments, beams are not exactly Gaussian, and the field is usually described by a mode expansion using a set of eigenvectors of

Read the complete text