Turbo Coded Single Sideband OFDM-OQAM Signaling through Frequency Selective Rayleigh Fading Channels

Kasturi Vasudevan · 2026

Read Turbo Coded Single Sideband OFDM-OQAM Signaling through Frequency Selective Rayleigh Fading Channels by Kasturi Vasudevan (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2602-18881.txt.

Introduction

Sending turbo-coded signals through fading wireless channels is a classic problem, but single-sideband variants remain underexplored. Kasturi Vasudevan, writing alone in 2026, investigates bit-error-rate performance for turbo-coded OFDM-OQAM signals through frequency-selective Rayleigh fading channels, with carrier frequency offset and additive white Gaussian noise.

The highlight is a complex transmit filter built from a root raised cosine pulse and its Hilbert transform, paired with a plain matched filter at the receiver. The system resembles single-sideband modulation from analogue communications. Turbo coding and subcarrier diversity improve error performance over an uncoded system. Discrete-time algorithms cover frame detection, two-step carrier offset correction, and channel and noise variance estimation, using a single antenna each way.

Catalog record

CREATORKasturi Vasudevan
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE33 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2602-18881

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Turbo Coded Single Sideband OFDM-OQAM Signaling through Frequency Selective Rayleigh Fading Channels Kasturi Vasudevan Abstract This work investigates the bit-error-rate (BER) performance of turbo coded orthogonal frequency division multiplexed - offset quadrature amplitude modulated (OFDM- OQAM) signals transmitted through frequency selective Rayleigh fading channels in the presence of carrier frequency offset (CFO) and additive white Gaussian noise (AWGN). The highlight of this work is to use the root raised cosine (RRC) pulse and its Hilbert transform as the complex-valued transmit filter and a simple matched filter at the receiver. The proposed system is similar to single sideband (SSB) modulation, that has roots in analog communications. Turbo code and subcarrier diversity is employed to improve the BER performance over that of an uncoded system. Discrete-time algorithms for frame detection, two-step CFO, channel and noise variance estimation have been proposed. A single transmit and receive antenna is assumed. Similar work has not been done earlier. keywords OFDM-OQAM; Hilbert transform; single sideband modulation; turbo code; frequency selective Rayleigh fading channel; carrier frequency offset; synchronization; subcarrier diversity. † † firstpage: 1 † † volume: 1 † † issue: 1 † † articlenumber: 0 † † year: 2025 † † copyright-year: 2025 † † hreflink: https://doi.org/ † † titlecitation: Title † † authornames: Kasturi Vasudevan † † authorcitation: Vasudevan, K. † † address: 1 IIT Kanpur; [email protected] † † corresponding: Correspondence: [email protected]; † † reftitle: References 1 Introduction Orthogonal frequency division multiplexing-offset quadrature amplitude modulation (OFDM-OQAM) is a modulation of choice for 5G and beyond technologies due to its spectral containment and robustness to carrier frequency offset (CFO), compared to classical OFDM. However, it has been shown in Vasudevan 2013 ; Vasudevan 2015 ; Vasudevan 2017 that CFO in OFDM can be estimated very accurately with linear complexity and large scope for parallel processing. Moreover, the spectrum of OFDM can also be contained using pulse shaping Vasudevan 2010 . The overhead due to the cyclic prefix (CP) in OFDM can be reduced by increasing the “frame” size. In fact it is the “training” or “pilot” that increases the overhead, rather than CP Vasudevan 2013 ; Vasudevan 2015 ; Vasudevan 2017 . Most of the literature on OFDM-OQAM or its variants like filter bank multicarrier (FBMC) or universal filtered multicarrier (UFMC), use non-Nyquist pulses like isotropic orthogonal transfer algorithm (IOTA) and extended Gaussian functions (EGF), which result in intersymbol interference (ISI) Farhang-Boroujeny 2011 ; Jiang et al. 2014 ; Basar 2016 ; Weitkemper et al. 2016 ; Jin et al. 2017 ; Yang et al. 2021 . A brief survey of OFDM-OQAM is given below. Channel estimation for coherent optical FBMC-OQAM is given in Alaghbari et al. 2022 . Underwater acoustic communications using FBMC-OQAM is presented in Lu et al. 2023 . FBMC for massive multiple input multiple output (MIMO) systems is investigated in Qi et al. 2023 ; Hamdar et al. 2024 . Blind joint CFO and sampling time offset (STO) estimation for FBMC-OQAM systems is addressed in Rebouh et al. 2023 . Downlink precoding for cell-free FBMC/OQAM systems with asynchronous reception is considered in Qi et al. 2023 . FBMC-OQAM transceivers for 6G and beyond has been reviewed in Hamdar et al. 2023 . A low-complexity symbol reconstruction based on direct symbol decision for FBMC-OQAM systems is presented in Chen et al. 2023 . The performance of FBMC and OFDM in fiber optic systems is studied in Zhang et al. 2024 . A nonuniform FBMC-OQAM with subchannels having arbitrary bandwidths is discussed in Punt and Vučić 2024 . Voice transmission over voiceband channels using FBMC-OQAM is presented in Čubrilović et al. 2024 . Design of waveforms for FBMC-OQAM is considered in Chen et al. 2025 ; Dai et al. 2025 . Peak-to-average power ratio (PAPR) reduction in FBMC-OQAM is given in Li et al. 2025 . Detection of OFDM-OQAM signals in the presence of phase noise is discussed in Chen et al. 2025 . A new pilot pattern for channel estimation in FBMC systems is considered in Hamdar et al. 2025 . In Lin and Chen 2021 , an efficient channel estimation for UFMC is proposed. In Choi 2021 , it is shown that the BER performance of full duplex (FD) FBMC (FD-FBMC) is better than FD-UFMC and FD-OFDM. A reliability-based signal detection for UFMC is proposed in Si et al. 2021 . Sparse code multiple access in UFMC is presented in Chen et al. 2021 . A performance comparison between OFDM and UFMC for passive optical networks (PON) is studied in Zhang et al. 2021 . A deep learning-aided signal detection for two-stage index modulated UFMC systems is proposed in Jiang et al. 2022 . Multiple access techniques for OFDM, FBMC and UFMC is presented in Kebede et al. 2022 . Blind carrier frequency offset (CFO) estimation in UFMC is investigated in Lin and Hwang 2022a ; Lin and Hwang 2022b . Performance comparison of FBMC, UFMC and filtered OFDM (F-OFDM) is given in Guneser et al. 2022 . UFMC for MIMO systems is addressed in Asgharnia et al. 2024 . Peak-to-average power ratio (PAPR) reduction in OFDM, F-OFDM and UFMC is discussed in Tu and Hsu 2025 . UFMC over optical fiber networks for 6G is investigated in Dávila et al. 2025 . A low complexity UFMC receiver for 6G is given in Eren 2025 . In this work, we use the pulse having the root raised cosine (RRC) spectrum and its modified Hilbert transform as the complex-valued transmit filter. This approach also corresponds to single sideband (SSB) modulation that has roots in analog communications. Therefore, the bandwidth of the transmitted signal is half that of conventional QAM or OQAM systems and is narrow enough such that the channel can be considered to be distortionless, justifying the use of a matched filter receiver Vasudevan 2010 ; Vasudevan et al. 2023 ; Vasudevan et al. 2024 . In practice however, the distortionless channel assumption may not strictly hold, which results in ISI. The bit-error-rate (BER) performance of the proposed system has been analyzed using computer simulations in the presence of carrier frequency offset (CFO), frequency selective Rayleigh fading channel and additive white Gaussian noise (AWGN). Turbo coding and subcarrier diversity has been introduced to significantly improve the BER performance over that of the uncoded system. Discrete-time algorithms for frame detection, CFO, channel and noise variance estimation have been discussed. Similar work has not been done earlier. This paper is organized as follows. Section 2 presents the system model. In section 3 , we describe the discrete-time receiver algorithms. Section 4 contains the simulation results. Finally, the conclusions are in section 5 . The notation used is as follows. Complex quantities are denoted by tilde, e.g. \tilde{x} . Caret is used to denote estimate Vasudevan 2010 or Hilbert transform Haykin 1983 , depending on the context, e.g. \hat{x} denotes estimate or Hilbert transform of x . However, we emphasize that by default, caret denotes an estimate. If it denotes Hilbert transform, then it is explicitly stated. Boldface is used for vectors and matrices. The letter “ \mathrm{j} ” denotes \sqrt{-1} , “ \star ” denotes convolution and “ E[\cdot] ” is the expectation operator. “ \Re\{\cdot\} ” denotes the real part and “ \Im\{\cdot\}

Read the complete text