Impact of Separation Distance on the Performance and Annual Energy Production of a Dual-Flap Oscillating Surge Wave Energy Converter
Alaa Ahmed · 2026
Read Impact of Separation Distance on the Performance and Annual Energy Production of a Dual-Flap Oscillating Surge Wave Energy Converter by Alaa Ahmed (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2602-10301.txt.
Introduction
Surge wave energy converters capture wave energy with a flap hinged at the seabed or a floating platform, and dual-flap arrays raise a spacing question. A 2026 paper by Alaa Ahmed, sole author, investigates how flap spacing affects each flap's performance, estimating absorbed wave energy and yearly energy output at the PacWave South site. Friction-free numerical simulations predict converter response, checked against a one-tenth scale model in a wave tank.
For short flap gaps, flap interaction proves harmful or helpful depending on wave frequency, yet those effects largely balance across varied wave excitations. For longer gaps, interaction always proves helpful. The results guide array spacing for dual-flap converters, balancing per-flap performance against total yearly energy output.
Catalog record
| CREATOR | Alaa Ahmed |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 34 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2602-10301
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Impact of Separation Distance on the Performance and Annual Energy Production of a Dual-Flap Oscillating Surge Wave Energy Converter Alaa Ahmed Abstract Among the different concepts for wave energy conversion, oscillating surge wave energy converters have been shown to have a high capture width ratio. The primary wave capture structure consists of a flap hinged at the seabed or to a floating platform. Different flap configurations, including single and dual-flap, have been investigated. The separation distance between the oscillating surge wave energy converters can have an impact on their response when deployed in arrays. We consider the case of a dual-flap oscillating surge wave energy converter and investigate the impact of the separation distance between them on the performance of each flap. We estimate the absorbed wave energy and the annual energy production by the two flaps when deployed at the PacWave South site. Inviscid numerical simulations were conducted to predict the response of the oscillating surge wave energy converters. The simulations are validated with experimental measurements of a 1:10 scaled model in a wave tank. The results show that for a short separation distance, the interaction between the oscillating surge wave energy converters has a destructive and constructive effect depending on the wave frequency. However, these effects tend to balance each other out when considering the broad range of wave excitations. For longer separation distances, the interaction always results in a constructive effect. The results reveal that the separation distance has an insignificant impact on annual energy production when considering all wave frequencies and amplitudes. , keywords Wave energy ,Wave tank tests ,OSWEC ,WEC array ,Separation distance ,Power matrix † † corresponding: Corresponding author, Email address: [email protected] 1 Introduction Wave energy converters (WEC) are often arranged in arrays to generate substantial amount of energy and serve as an effective alternate source for energy. When a WEC is deployed in water, it interacts with the incident waves and becomes a source for diffracted and radiated waves. Both diffracted and radiated waves have the characteristics of carrying energy similar to the incident waves. However, they can propagate in all directions from the WEC. The resultant fluid-structure interaction in a WEC array could affect all the other WECs in all directions. Consequently, this impacts the performance of each WEC in a different way depending on its location in the array, distance from other WECs, geometry, and wavelength of incident waves. The impact can be constructive in a way it adds to the energy absorption or destructive in that it decreases it Budal 1977 . Thus, assessing the impact of the separation distance is important in designing a WEC array. One of the most efficient WEC designs is the oscillating wave energy converter (OSWEC) Babarit 2015 ; Babarit et al. 2012 . It consists of a single degree of freedom flap, hinged from one end at the bottom and allowed to rotate at the other end as the waves pass by. The relative motion between the flap and the waves is converted to power by using a power take-off (PTO) system Li et al. 2021 . It can be hinged directly to the seabed in shallow water or to a floating platform in deep water, which in turn is connected to the seabed by mooring lines Mi et al. 2022 . Folley et al. 2007 noted that positioning the OSWEC in deeper waters will result in larger captured power. Therefore, building an array of OSWECs in deep water can generate a substantial amount of energy. To be able to understand the behavior and response of the OSWEC in an array, the dynamic response should be examined with different separation distances. Reducing the distance between the flaps could result in a significant reduction in the mass of the platform and, consequently, the levelized cost of electricity (LCOE). However, it might add to the mooring loads and require a modified mooring configuration Yang et al. 2020 . Therefore, other factors should be considered when designing an array and setting the distance between the OSWECs, such as mooring loads and manufacturing costs, although this is not the scope of the presented study. Budal 1977 was the pioneer in the research field of studying the wave interaction between WECs in arrays. He demonstrated analytically the possibility of raising the power absorbed from identical bodies to 100% of the incident wave. It can be accomplished when the bodies are positioned with a separation distance of a certain ratio to the wavelength. Several studies adopted the same approach with different designs but equally spaced in the array. The results highlighted the occurrence of constructive interference when a suitable layout is sought Falnes 1980 ; Thomas and Evans 1981 ; Maniar and Newman 1997 . Further experimental studies were performed under regular and irregular wave conditions to maximize the captured power by a single WEC in a small array (5 to 10 WECs). The experiments demonstrated that maximizing the power depends on the incident wave period and number of WECs in the array Weller et al. 2010 ; Sun et al. 2016 ; Stansby et al. 2017 . Exploring this interaction experimentally with WECs in full-scale can be challenging and expensive; therefore, numerical tools are utilized to predict the hydrodynamic interaction between the WECs. Extensive research using the boundary element method (BEM) has been performed to numerically solve the hydrodynamic response of the WECs with consideration of the wave interference for arbitrary designs, the number of WECs in the array, and different ranges for separation distance. Babarit 2010 studied the effect of long separation distances on the energy production of a farm, which consists of two WECs, heaving cylinders and surging barges. He found the impact of the wave interference still affects the performance with a separation distance of 20 km for the surging barges. In both cases, a constructive effect was found on energy production. Moreover, the study considered the impact of the wave direction on the total energy production of the array. It was found that a zero heading angle maximizes energy production, while a 90-degree heading angle does not allow for any energy production. Borgarino et al. 2012 considered the same WECs as in Babarit 2010 , but for larger arrays of 9–25 WECs and different layouts for the farm. The research concluded that the rear rows in the farm will experience destructive effects. However, the effect on mean energy production is minor. Further numerical and analytical studies on heaving and surging WECs concerning the wave interference and its effect on the performance of the WECs can be found in Falcao 2002 ; Ricci et al. 2007 ; Child and Venugopal 2007 ; Vicente et al. 2009 ; Child and Venugopal 2009 ; Babarit et al. 2010 ; De Backer et al. 2010 ; Child and Venugopal 2010 ; Göteman et al. 2015 ; McGuinness and Thomas 2016 ; Göteman 2017 ; Ruiz et al. 2017 ; Moarefdoost et al. 2017 ; Kara 2019 ; Stansby et al. 2022 ; Göteman 2022 ; Liu et al. 2022 . Most of the aforementioned research is related to the wave interference within arrays of WECs with transitional displacement, while the interest in this paper is focused on OSWECs and