HLGFA: High–Low Resolution Guided Feature Alignment for Unsupervised Anomaly Detection

Han Zhou, Yuxuan Gao, Yinchao Du, Xuezhe Zheng · 2026

Read HLGFA: High–Low Resolution Guided Feature Alignment for Unsupervised Anomaly Detection by Han Zhou, Yuxuan Gao, Yinchao Du, Xuezhe Zheng (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2602-09524.txt.

Introduction

Factory checks need flaw spotting without defect cases, since faulty samples are rare by nature. Han Zhou and three co-authors propose HLGFA, a 2026 design that learns a normal look from cross-detail match rather than pixel remake. High- and low-detail views of normal samples pass through a shared frozen backbone, and high-detail structure and detail traits guide polish of low-detail traits.

Guided tuning and gated leftover fix carry that guidance. At use, flaws appear on their own as regions where cross-detail match breaks down. A noise-aware boost plan further damps nuisance noise common on factory floors. On standard benchmarks the method scores very highly at both pixel and image levels, beating typical remake- and trait-based rivals on the MVTec AD set.

Catalog record

CREATORHan Zhou, Yuxuan Gao, Yinchao Du, Xuezhe Zheng
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE31 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2602-09524

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

HLGFA: High–Low Resolution Guided Feature Alignment for Unsupervised Anomaly Detection Han Zhou, Yuxuan Gao, Yinchao Du, Xuezhe Zheng Abstract Unsupervised industrial anomaly detection (UAD) is essential for modern manufacturing inspection, where defect samples are scarce and reliable detection is required. In this paper, we propose HLGFA , a high-low resolution guided feature alignment framework that learns normality by modeling cross-resolution feature consistency between high-resolution and low-resolution representations of normal samples, instead of relying on pixel-level reconstruction. Dual-resolution inputs are processed by a shared frozen backbone to extract multi-level features, and high-resolution representations are decomposed into structure and detail priors to guide the refinement of low-resolution features through conditional modulation and gated residual correction. During inference, anomalies are naturally identified as regions where cross-resolution alignment breaks down. In addition, a noise-aware data augmentation strategy is introduced to suppress nuisance-induced responses commonly observed in industrial environments. Extensive experiments on standard benchmarks demonstrate the effectiveness of HLGFA, achieving 97.9% pixel-level AUROC and 97.5% image-level AUROC on the MVTec AD dataset, outperforming representative reconstruction-based and feature-based methods. 1 Introduction Industrial anomaly detection (IAD) is a fundamental component of modern manufacturing quality control, aiming to automatically identify defects or irregularities without human intervention. With the rapid deployment of automated production lines, reliable visual inspection systems have become essential across a wide range of industries, where manual inspection is often inefficient, error-prone, and difficult to scale. Despite substantial progress in computer vision, IAD remains challenging due to several inherent factors: the extreme imbalance between normal and defective samples, the large diversity and unpredictability of defect appearances, and the presence of complex industrial backgrounds that can obscure or mimic defects. Moreover, real-world applications demand high precision and recall, as missed or false detections may lead to significant economic loss or safety risks. Unsupervised anomaly detection (UAD) has therefore attracted increasing attention, as it learns normal patterns solely from defect-free samples and identifies anomalies as deviations during inference. Existing UAD approaches can be broadly grouped into reconstruction-based methods [ 20 ] , feature-based methods such as PatchCore [ 15 ] and UniAD [ 18 ] , and more recent zero-shot or few-shot paradigms leveraging vision-language models [ 8 , 9 , 5 ] . While effective, many existing methods struggle to simultaneously preserve global structural consistency and local detail fidelity, especially when defects vary significantly in scale. A key observation in industrial inspection is that normal patterns exhibit stable feature responses under resolution variation, whereas anomalous regions are considerably more sensitive to resolution reduction. When images are downsampled, the global structure of normal objects is largely preserved, while defect-related cues—typically local and irregular—tend to degrade or shift. This suggests that cross-resolution feature consistency provides an intrinsic cue for normality, whereas pronounced inconsistencies naturally indicate anomalies. As illustrated in Fig. 1 , normal samples maintain consistent responses across resolutions, while anomalous samples exhibit clear response shifts, offering a principled signal for unsupervised anomaly detection without explicit defect modeling. Motivated by this observation, we propose HLGFA, a high–low resolution guided feature alignment framework for unsupervised industrial anomaly detection. Instead of relying on pixel-level reconstruction, HLGFA models normality by enforcing cross-resolution feature consistency between high-resolution and low-resolution views of normal samples. Figure 1 : Visualization of feature responses extracted by a pretrained backbone under different resolutions. Normal samples show consistent activation patterns across high- and low-resolution views, while anomalous samples exhibit pronounced response shifts after resolution reduction due to the degradation of fine-grained structural cues. Given an input image, dual-resolution features are extracted by a shared frozen backbone and aligned through a learnable guidance module that exploits the asymmetric characteristics of high- and low-resolution representations. High-resolution features are further decomposed into structure and detail priors, which jointly guide the refinement of low-resolution features via conditional modulation and gated residual correction. During inference, anomalies are detected as regions where cross-resolution alignment breaks down. In addition, a noise-aware data augmentation strategy is introduced to improve robustness against nuisance patterns commonly observed in industrial environments. The main contributions of this work are summarized as follows: • We propose an unsupervised anomaly detection framework that identifies anomalies through cross-resolution feature inconsistency. • We design a structure–detail decoupled guided alignment module that enables stable cross-resolution feature alignment without updating backbone parameters. • We introduce a noise-aware data augmentation strategy to enhance robustness and reduce false positives in industrial scenarios. The remainder of this paper is organized as follows. Section 2 reviews related work, Section 3 presents the proposed method, Section 4 reports experimental results, and Section 5 concludes the paper. 2 Related Works Advancements in industrial anomaly detection have been driven by diverse methodologies focused on identifying defects with minimal labeled data. This section reviews key works in the field, which fall into the following categories. 2.1 Reconstruction-based Anomaly Detection Reconstruction-based methods identify anomalies by learning to model the distribution of normal data and defect deviations through reconstruction errors. Early generative works, such as SPADE [ 13 ] , introduced spatially-adaptive normalization for high-fidelity semantic image synthesis, influencing subsequent methods that leverage conditional generation for data augmentation or reconstruction. A notable limitation of standard auto-encoders is their tendency to generalize too well, potentially reconstructing anomalies. To address this, Dong Gong et al. [ 6 ] proposed a memory-augmented deep autoencoder (MemAE), which constrains the latent representation by correlating it with a memory bank of prototypical normal patterns, effectively preventing the reconstruction of anomalous regions. Building on the principle of constrained reconstruction, [ 20 ] proposed RIAD (Reconstruction by Inpainting for Visual Anomaly Detection), a novel approach that frames anomaly detection as a self-supervised reconstruction-by-inpainting problem. Unlike standard auto-encoding methods, RIAD randomly removes and reconstructs partial image regions from partial inpainting. By forcing the model to learn from incomplete data, RIAD achieves state-of-the-art results on challenging anomaly detection benchmarks. Further advancing reconstruction-based paradigms, [ 9 ] introduced the Dual-Interrelated Diffusion Model for few-shot anomaly image generation. Their approach tackles the critical challenge of data scarcity in industrial defect detection by using dual-interrelated diffusion processes to generate anomaly images with limited examples. This enables more effective anomaly detection, as the model learns from very few anomaly samples through sophisticated diffusion modeling techniques. 2.2 Feature-based Anomaly Detection Feature-based methods leverage pre-trained representations and feature matching strategies for anomaly detection. A foundational work in this area is PaDiM (Patch Distribution Modeling) [ 4 ] . PaDiM utilizes a pre-trained convolutional neural network to extract patch-level features, models their multivariate Gaussian distributions from normal training images, and detects anomalies by computing the Mahalanobis distance of test patches to the learned normal distribution, achieving robust localization performance. Extending this paradigm, PatchCore [ 15 ] focuses on achieving total recall in industrial anomaly detection by constructing a memory bank of nominal patch features and using a nearest-neighbor search for scoring. This approach maximizes detection sensitivity while maintaining precision, addressing the practical requirement of minimizing false negatives in industrial inspection scenarios. Further advancing this paradigm, UniAD [ 18 ] proposed a unified model for multi-class anomaly detection called UniAD. Their approach utilizes a memory bank and prototype learning to achieve robust anomaly discrimination across multiple object categories, demonstrating strong performance by effectively modeling normal feature distributions across diverse classes. 2.3 Zero-shot and Few-shot Anomaly

Read the complete text