Tuning current flow in superconducting thin film strips by control wires. Applications to single photon detectors and diodes.

Alex Gurevich · 2026

Read Tuning current flow in superconducting thin film strips by control wires. Applications to single photon detectors and diodes. by Alex Gurevich (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2602-02984.txt.

Introduction

Alex Gurevich's solo 2026 paper shows how control wires can reshape current flow in superconducting strips. In wide strips, current normally crowds at the edges, which limits detectors and invites defects to trigger failure. Gurevich integrates a thin-film strip with current-carrying control wires placed alongside or in a bilayer structure.

Solving the London and Ginzburg-Landau equations shows the crowding can be removed. The profile can even be inverted, with dips at the edges that block early vortex entry. He evaluates vortex penetration and pair unbinding in such profiles. Wide single-photon detectors become possible, tunable in place by changing control currents. The structures also respond non-reciprocally, behaving as superconducting diodes, and offer a cleaner setting for studying vortex matter.

Catalog record

CREATORAlex Gurevich
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE59 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2602-02984

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Tuning current flow in superconducting thin film strips by control wires. Applications to single photon detectors and diodes. Alex Gurevich Abstract It is shown that integration of a thin film superconducting strip with current-carrying control wires enables one to engineer a profile of supercurrent density J ⁡ ( x ) J(x) with no current crowding at the edges of a strip wider than the magnetic Pearl length Λ \Lambda . Moreover, J ⁡ ( x ) J(x) in a strip can be tuned by control wires to produce an inverted J ⁡ ( x ) J(x) profile with dips at the edges to mitigate current crowding at lithographic defects and block premature penetration of vortices. These conclusions are corroborated by calculations of J ⁡ ( x ) J(x) in a thin strip coupled inductively with side control wires or in bilayer strip structures by solving the London and Ginzburg Landau equations in the thin film Pearl limit. Thermally-activated penetration of vortices from the edges and unbinding of vortex-antivortex pairs in inverted J ⁡ ( x ) J(x) profiles are evaluated. It is shown that these structures can be used to develop single-photon strip detectors much wider than Λ \Lambda . Such detectors can be tuned in situ by varying current in control wires to reach the ultimate photon sensitivity limited by unbinding of vortex-antivortex pairs. The structures considered here also exhibit a non-reciprocal current response and behave as superconducting diodes. I Introduction Thin superconducting films and micro resonators are instrumental in superconducting electronics res ; qq . Particularly, superconducting nanowire single-photon detectors (SNSPD) spd1 ; spd2 ; spd3 with up to ps time resolution have proliferated in quantum information technology qi1 ; qi2 ; qi3 ; qi4 ; qi5 ; qi6 ; qi7 ; qi8 ; qi9 , astronomy astron , high energy particle detectors and search for dark matter hep1 ; hep2 ; hep3 , or deep brain imaging brain1 ; brain2 ; brain3 . One of the goals of the SNSPD technology is the development of large-area detector arrays with a nearly 100 \% photon sensitivity into infrared light spd2 ; spd3 ; brain3 . Such detectors are photon-sensitive at bios currents I_{i}<I_{s}<I_{b} , where the onset current I_{i} and the switching current I_{b} are fractions of the depairing current I_{d} . Boosting the sensitivity of SNSPD requires increasing both the operational current range I_{b}-I_{i} and the detector area. As the bios current I approaches I_{d} , the photon energy required to form a critical hotspot expanding across the strip decreases and the minimum detectable photon energy becomes weakly dependent on the strip width vodolaz so it may be beneficial to push I_{b} toward I_{d} as mach as possible. However, there are limitations of how close I_{b} can approach I_{d} and how much the width of a straight strip be increased. First, thin strips inevitably have lithographic defects causing localized current crowding along the edges def1 ; def2 . For instance, a semi-circular edge indentation of radius larger than the coherence length \xi causes a two-fold local increase in the sheet current density J(x) , while a sharp indentation or microcrack causes even greater current crowding which can initiate vortex jets jet1 ; jet2 ; jet3 ; jet4 or dendritic thermo-magnetic vortex avalanches dendr1 ; dendr2 ; dendr3 destroying the non-dissipative current-carrying state. Second, the Meissner effect causes current crowding at the edges which becomes detrimental for the SNSPD performance as the width of the strip exceeds the magnetic Pearl length \Lambda pearl ; dg . Interplay of these effects illustrated in Fig. 1 decreases the entry energy barrier of vortices, greatly increasing the dark count rate due to thermally-activated penetration of vortices from the edges at currents well below I_{d} . To increase the photon-sensitive detector area, meandering SNSPDs structures have been developed spd1 ; spd2 ; spd3 . To mitigate the current crowding by the edge roughness, the active SNSPD areas have been irradiated with heavy ions leaving intact the long edges along the strip irad1 and the bend regions irad2 . Figure 1: Factors limiting the maximum current in superconducting thin strips: (a) edge roughness causing local current crowding and premature penetration of vortices. The dashed line depicts a boundary of a layer in which local variations of current density are essential. (b) The Pearl current crowding at the edges of a bare strip (blue). An inverted current density profile J(x) in a strip tuned by control wires (red) deactivating both the edge defects and the Pearl current crowding. This work explores boosting the SNSPD performance by forming an inverted profile of J(x) in a superconducting strip shown in Fig. 1 . Here a reduced current density at the edges mitigates the effect of current crowding defects and eliminates current crowding caused by the Pearl screening. It is shown that such J(x) profile can indeed be produced and tuned in situ in a superconducting strip coupled inductively with adjacent current-carrying wires or other thin film structures. These control wires produce the magnetic field that counters the perpendicular component of the self field of SNSPD and redistribute J(x) in the strip as shown in Fig. 1 . Such structures can provide a flat portion of J(x) in the photon-sensitive area of the strip and controllable dips at the edges which block premature penetration of vortices and give rise to a non-reciprocal current-voltage characteristic of a superconducting diode. Furthermore, currents in the control wires can be tuned in such a way that the SNSPD reaches the ultimate performance limit determined by the unbinding of vortex-antivotrtes pairs in the strip bkt1 ; bkt2 . Such device architecture lifts the SNSPD size limitations and opens opportunities for the development of straight strip detectors much wider than the Pearl length. This approach has been recently implemented in Ref. natp which reported the development of 3 nm thick and up to 0.1 mm wide WSi strip detectors integrated with Nb side wires (”rails”), reaching 100 \% sensitivity into infrared, up to 20 \% larger switching currents and the dark count rate decreased by up to 8 orders of magnitude. Manipulation of resistive switching in superconducting films by current-carrying control wires has a long history which goes back to the development of cryotrons cr1 ; cr2 ; cr3 . The paper is organized as follows. In Sec. II the sheet current density J(x) in a thin film strip coupled with control wires is calculated by solving the London equations. It is shown that the inverted profile of J(x) can be produced in strips of any width even much wider than the Pearl length. In Sec. III bilayers structures are considered in which one of the layers is used to tune J(x) in the prime strip. In Sec. IV the nonlinear pairbreaking effects in a bare strip and a strip with control wires are considered by solving the Ginzburg-Landau (GL) equations for J(x) . It is shown that the strip inductively coupled with control wires has a non-reciprocal current response and can behave as a tunable superconducting diode. In Sec. V the dynamics of vortices driven by the inverted profile J(x) is considered. The dark counts caused by penetration of vortices through the

Read the complete text