Inferring Interstellar Medium Density, Temperature, and Metallicity from Turbulent H II Regions
Larrance Xing 1,∗, Nicholas Choustikov 2, Harley Katz 1,3,∗, & Alex J. Cameron 4,5,2 · 2026
Read Inferring Interstellar Medium Density, Temperature, and Metallicity from Turbulent H II Regions by Larrance Xing 1,∗, Nicholas Choustikov 2, Harley Katz 1,3,∗, & Alex J. Cameron 4,5,2 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2602-02949.txt.
Introduction
Turbulence inside glowing gas clouds can bias what astronomers infer from their light, according to Larrance Xing and 3 co-authors in a 2026 paper. Such clouds, called H II regions, surround hot young stars. Analysts usually assume one uniform zone of density and temperature when reading their spectra, which may miss real complexity.
The team simulates three-dimensional H II regions around a single O-type star, with and without supersonic turbulence. Turbulence shifts common emission-line ratios in systematic directions. Metallicity estimates from the direct temperature method came out biased low. Different density indicators, from infrared to ultraviolet, also disagreed strongly. The authors call for large model grids that include turbulence across conditions seen in near and distant galaxies.
Catalog record
| CREATOR | Larrance Xing 1,∗, Nicholas Choustikov 2, Harley Katz 1,3,∗, & Alex J. Cameron 4,5,2 |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 52 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2602-02949
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Inferring Interstellar Medium Density, Temperature, and Metallicity from Turbulent H II Regions ∗ E-mail: [email protected] ∗ E-mail: [email protected] Larrance Xing 1,∗, Nicholas Choustikov 2, Harley Katz 1,3,∗, & Alex J. Cameron 4,5,2 Abstract Reliable nebular emission line diagnostics are essential for accurately inferring the physical properties (e.g. electron temperature, density, pressure, and metallicity) of H II regions from spectra. When interpreting spectra, it is typical to adopt a single zone model, e.g. at fixed density, pressure, or temperature, to infer H II region properties. However, such an assumption may not fully capture the complexities of a turbulent interstellar medium. To understand how a complex density field driven by supersonic turbulence impacts nebular emission lines, we simulate 3D H II regions surrounding a single O star, both with and without supersonic turbulence. We find that turbulence directly impacts the values of common strong line ratios. For example turbulent H II regions exhibit systematically higher [N II ]/H α \alpha , lower [O III ]/H β \beta , and lower O32, compared to homogeneous H II regions with the same mean density and ionizing source. These biases can impact inferences of metallicity, ionization parameter, excitation, and ionization source. For our choice of turbulence, direct T e T_{e} method metallicity inferences are biased low, by up to 0.1 dex, which is important for metallicity studies, but not enough to explain the abundance discrepancy problem. Finally, we show that large differences between measured electron densities emerge between infrared, optical, and UV density indicators. Our results motivate the need for large grids of turbulent H II regions models that span the range of conditions seen at both high and low redshift to better interpret observed spectra. keywords ISM, galaxy formation 1 Introduction Nebular emission line diagnostics represent a powerful probe of the physical properties of the interstellar medium (ISM). The electron temperature, density, pressure, and metallicity of H II regions can all be probed by various combinations of emission lines that originate in ionized gas ( Kewley et al. 2019 ; Kewley, Nicholls & Sutherland 2019 ) . Likewise, diagnostics from low-ionization state atoms and molecules can be used to trace similar properties in neutral or diffuse ionized gas. The physical conditions (e.g. electron temperature, electron number density, and ion number density) of the ISM strongly impact the emission from H II regions. For example, an ion can be used to trace electron temperature in an H II region if the species is both abundant enough and the first two excited states are at low enough energy so that they can be sufficiently populated by collisional excitation. An example of such an ion is O ++ . O ++ has an ionization energy of 35.1 eV which is low enough to be photoionized by stars, while the next ionization state requires 54.9 eV, which is typically higher than that of photons emitted by a massive, metal-enriched O-star — hence the ion is sufficiently abundant. Next, the first two excited state (from the 3 P ground state) are 1 D and 1 S, which require \sim 2.5 eV and \sim 5.3 eV, respectively to populate. Assuming the electron velocity distribution function is well modeled by a Maxwell-Boltzmann distribution, which depends only on temperature, the ratio of emission from these two states (i.e. the 5007 Å and 4363 Å lines) probe the electron temperature. Other ions with structure suitable for tracing electron temperature that are commonly observed in H II regions include N + , O + , S ++ , etc. Similarly, electron density can be probed, for example, by ions that have closely-spaced doublet states (e.g. O + , S + , Ar +++ ). Because the doublet state requires approximately the same excitation energy, the difference in emissivity is dictated by differences in the Einstein coefficient for spontaneous de-excitation and collisional de-excitation. The former is measured from quantum mechanical calculations and the latter represents the probe of electron density. The simplicity of this physics makes such calculations readily applicable to observed galaxy spectra with open-source software ( Dere et al. 1997 ; Luridiana, Morisset & Shaw 2015 , e.g.) . A key assumption about these calculations is that all of the emission originates from a single “zone” that has a uniform density, temperature, metallicity, etc. This assumption is untrue both within individual H II regions ( Rubin 1968 , e.g.) as well as across a galaxy as a whole ( Kobulnicky, Kennicutt & Pizagno 1999 ; Harikane et al. 2025 , e.g.) . To address this issue, there are two approaches. First, numerous codes have been developed that statistically apply multi-zone models to observed spectra to infer galaxy and H II region properties ( Lebouteiller & Ramambason 2022 ; Marconi et al. 2024 , e.g.) . For such inference, either the distribution function of H II region properties must be parametrized or for non-parametric models, a cap or regularization must be applied to limit the number of zones. Alternatively, one can attempt to forward model the detailed structure of individual H II regions or a whole galaxy (comprised of multiple H II regions. While modeling entire galaxies remains difficult, public codes such as CLOUDY ( Ferland et al. 1998 ; Chatzikos et al. 2023 ) or MAPPINGS ( Dopita & Sutherland 1996 ; Sutherland et al. 2018 ) have made H II region models widely accessible and they have been extremely successful in being able to reproduce the distribution of observed galaxy and H II region properties seen in large surveys ( Kewley et al. 2001 , e.g.) . However, photoionization models of H II regions have some key limitations. First, they often assume simplified geometries (e.g. spherical or plane-parallel) and either constant density or pressure 1 1 1 Note that this is not true of all photoionization models in the literature but this is anecdotally a reasonable description of what is generally assumed. . It is now well established that the geometry of an H II region can have significant effects on the resultant emission ( Jin, Kewley & Sutherland 2022b , e.g.) . Second, typical photoionization models assume that the cloud is in equilibrium (although c.f. Gnat & Sternberg 2007 ; Kumar & Chen 2025 in the context of the circumgalactic medium — CGM). However, this assumption may break down in the case where the timescale for the ionization front to reach the Strömgren radius becomes shorter than the main-sequence lifetime of massive stars or if the cooling time is shorter than the recombination time (see e.g. Richings et al. 2022 ; Katz et al. 2022 for discussion of the latter). Finally, the ISM is known to be turbulent and when the turbulence is supersonic, emission line ratios can differ from a static medium ( Gray & Scannapieco 2017 , e.g.) . The primary reason more complicated models of H II regions and galaxies have been less explored is that they are computationally much more expensive. While grids of millions of, for example, CLOUDY models can be readily computed on modern supercomputer architectures, the same is not true for 3D H II region models. Nevertheless, there are now numerous codes that can address the key issues with photoionization models ( Gray, Scannapieco