Hybrid MCP-PMT characterisation on a testbeam with Cherenkov setup
D. Vincenzi · 2026
Read Hybrid MCP-PMT characterisation on a testbeam with Cherenkov setup by D. Vincenzi (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-22713.txt.
Introduction
D. Vincenzi reports a beam test of a hybrid photon detector that reads single photons with fine timing. The device pairs a microchannel plate tube with a CMOS chip sealed inside. His 2026 preprint describes its run in a high-energy hadron beam at CERN, in a Cherenkov setup.
The detector ran at high gain and timed photons to a few hundred picoseconds. Fast, sure photon timing serves particle physics and imaging alike. A sealed, chip-read design could scale to large detectors. The test shows the concept works in a real beam. That proof is the paper's core.
Catalog record
| CREATOR | D. Vincenzi |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 15 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-22713
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Hybrid MCP-PMT characterisation on a testbeam with Cherenkov setup D. Vincenzi Abstract A novel photodetector based on a MCP-PMT vacuum tube with encapsulated CMOS ASIC has been tested at the CERN SPS high energy hadron beam, allowing single photon Cherenkov detection operating at 10 4 gain and with timing resolution of about 280 ps. 1 Introduction A novel device for the detection of single optical photons has been developed within the 4DPHOTON project [ 6 , 1 ] based on a vacuum tube design incorporating a transmission photocathode, a microchannel plate (MCP) for electron multiplication, and the Timepix4 ASIC [ 8 ] used as a pixelated anode, as can be seen in Figure 1 . Figure 1 : Simplified cross section of the detector assembly. A testbeam was performed at the CERN SPS North Area to characterise the performance of the first detector prototypes operating in a Ring-Imaging Cherenkov (RICH) configuration. The experimental setup includes a tracking telescope composed of two Timepix4 detectors with bump-bonded sensor, a solid radiator for generating Cherenkov photons, and an optical system designed to project the resulting Cherenkov rings onto the detector under test (DUT). 2 Experimental setup The testbeam has been performed at the H8 beamline of the CERN SPS, which provided a secondary hadron beam with 150 GeV/c momentum, composed by \sim 80\% of protons, \sim 20\% of pions, \sim 1\% of muons and a negligible fraction of electrons. Typical beam intensity was 10-100 particles for each spill of 4.8\, . The beam spot was measured to be gaussian on both perpendicular directions to the beam-line, with \sigma_{x}=3.76\pm 0.04 mm and \sigma_{y}=3.28\pm 0.04 mm and divergence compatible with \sim 200 \mu rad. Figure 2 shows the x-y spatial distribution of the beam in Figure 3 are reported the projection on the x and y axis with the corresponding fit results. (a) (b) Figure 2 : Spatial distribution of the beam on the first (a) and second (b) tracker. Figure 3 : (Top) Tracker 1 and (bottom) tracker 2 (left) x and (right) y hit distribution from data collected over 50 spills. The gaussian fit are superimposed. The experimental setup consists of three main components: a tracking system, a Ring-Imaging Cherenkov (RICH) system and timing reference detectors for event time measurement. A schematic overview of the setup is presented in Figure 4 . The tracking system is composed of two assemblies of the Timepix4 ASIC bump-bonded to a 300 \mu m pixelated silicon sensor, placed upstream of the full experimental setup. The detectors are spaced 100\, apart to achieve high precision in reconstructing particles trajectories. The RICH system, housed within a light-tight box downstream of the tracking system, comprises a plano-convex LA4545 lens (f=100 mm), with its back properly metallized that serves both as a Cherenkov radiator and as the initial focusing element. A LA4078 lens (f=75.3 mm) is paired with the radiator lens, then a tilted plane mirror reflect photons perpendicularly to the beam axis. After the mirror, three LA4795 lenses (f=200 mm) are placed, followed by a LA4384 lens (f=90.3 mm). The DUT follows this optical system, and is placed at a distance of 180 mm from the center of the mirror, in order to create a circular image of the Cherenkov ring with a diameter of approximately 17 mm. All the lenses are made of fused silica with a refractive index in the range of [1.45, 1.54] in the Cherenkov wavelength range, from 300 to 800 nm. The simulated optics system is shown in Figure 5 . The timing reference system is placed downstream of the RICH system along the beam direction, and is composed of a pair of plexiglass parallelepiped bars that act as Cherenkov radiators, tilted with an angle of 65 with respect to the beam axis, and optically coupled to standard single-anode MCP-PMT tubes, that provide fast timing measurements as a reference for evaluating the DUT timing resolution. A pair of scintillators have also been used to check the beam intensity and align the setup to the beam. (a) (b) Figure 4 : (a) Schematic of the testbeam setup seen from above: it comprises a tracking station, a RICH system, a time reference system and two scintillators for beam alignment. An external clock generator and a Trigger Logic Unit (TLU) are used to provide an external reference clock and external T0_sync and shutter signals to the three Timepix4. (b) 3D CAD rendering of the experimental apparatus. The detectors in the system were synchronised by use of a shared common clock running at 40\ MHz . Data acquisition was initiated by using external timing signals from the SPS fed to a custom Trigger Logic Unit (TLU). This board, running itself synchronously with the 40\ MHz shared clock, synchronously samples the warning of extraction signal from SPS and generates a shutter signal for each spill. The delay between the warning of extraction signal from SPS, the shutter signal and the duration of the shutter signal are configurable ensuring that the data acquisition occurred only during spills. The shutter signal was then split using a high precision 1:8 LVDS buffer and forwarded to all the detectors in the system enabling data-acquisition. On reception of this signal the data acquisition systems forward data from each detector to local servers using standard UDP-IP frames on 10G ethernet connections, depending on the detector type. At the local server level, the data was handled by multiple threads, allowing for simultaneous storage and redirection to the control room computer for monitoring. Data was automatically backed-up to a local storage server and mirrored to the CERN EOS system, providing redundancy without interrupting acquisition. Overall, the software infrastructure enabled synchronised and stable operation of the multiple Timepix4 devices, while offering immediate feedback to optimise the data-taking strategy. The C++ based DataPix4 framework [ 2 ] was used to manage both the trackers and the 4DPHOTON detector, control data acquisition and monitor the data stream in real time. The DataPix4 framework also performed online clustering of the hits. By aggregating hits belonging to the same photon event, it reconstructed the data in real-time, showing online statistics about the data taking. 3 Simulation A complete simulation has been developed using the Geant4 [ 3 , 4 , 5 ] toolkit to model the entire experimental setup and to provide accurate predictions of the photon timing and spatial distributions. It simulates the beam and its interactions with the Timepix4 assemblies bonded to silicon sensors, the Cherenkov radiator and the subsequent photon production, the transport of photons through the optical system, as well as the beam interaction with the Cherenkov detectors used for timing reference. The simulation takes into account several key factors, including the quantum efficiency of the photocathode, the angular and energy distribution of the particles, and backgrounds. This simulation tool has been employed to estimate the expected Cherenkov ring resolution, analyse the timing distribution of photons within a Cherenkov ring, and determine the optimal detector configuration by comparing different setup options. The optical elements simulated by Geant4 are shown in Figure 5 . Photons produced in a typical event are focused in a ring-shaped pattern with radius of 8.66\pm 0.01 mm, as can be seen in Figure 6 .