Zero-Order Diffraction Suppression in Full Field-of-View Computer Generated Holography: A Camera In the Loop Interferometric Approach

Alessandro Cerioni · 2026

Read Zero-Order Diffraction Suppression in Full Field-of-View Computer Generated Holography: A Camera In the Loop Interferometric Approach by Alessandro Cerioni (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-20376.txt.

Introduction

Alessandro Cerioni tackles zero-order diffraction, a bright unwanted spot that plagues computer-generated holography. In phase-only holograms shown across the full field of view, this stray light sits in the middle of the image. Cerioni introduces an interferometric method that cancels it with a suppression beam.

The beam is arranged to interfere destructively with the zero-order light, in a plane matched to the spatial light modulator that shows the hologram. A camera in the loop guides the setup. Cleaner holograms matter for holographic displays and imaging, where the central artifact now limits quality.

Catalog record

CREATORAlessandro Cerioni
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE32 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-20376

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Zero-Order Diffraction Suppression in Full Field-of-View Computer Generated Holography: A Camera In the Loop Interferometric Approach Alessandro Cerioni Abstract Abstract We introduce a novel interferometric approach for suppressing zero-order diffraction (ZOD) in phase-only computer-generated holography. The technique relies on the destructive interference between the zeroth-order light and a suppression beam in a plane optically conjugated to the spatial light modulator (SLM). A camera-in-the-loop (CITL) calibration procedure retrieves the optimal pixel-wise phase map that cancels out the ZOD component with high precision, while preserving the full modulation depth of the SLM. Experimental demonstrations on point-cloud and 2D/3D holograms achieve up to 99\% suppression of the ZOD intensity, without loss of image quality or field of view. Once calibrated, the correction can be applied to any hologram without recomputation, enabling real-time operation and robust performance over time. This method removes a long-standing barrier to the practical deployment of full-field holography, facilitating the development of compact, high-fidelity holographic engines for augmented and mixed reality displays. 1 Introduction Phase-only computer generated holography (CGH) is employed in numerous applications, including beam shaping [ 15 ] , data storage, 3D photostimulation for optogenetics [ 16 ] , optical manipulation [ 4 ] , and 3D imaging for Augmented Reality (AR) [ 3 , 7 , 1 ] . Among these, 3D CGH for AR has gained significant relevance due to the growing interest in AR applications for near-eye displays (NEDs), driven by the numerous benefits offered by laser-based phase-only CGH. The adoption of CGH for 3D virtual images in AR offers the advantage of eliminating the vergence-accommodation conflict (focus rivalry) [ 13 , 9 ] , a major challenge currently faced by existing NED technologies. Additionally, thanks to new algorithms and devices, CGH can provide aberration-free, high-resolution images and enables real-time videos [ 14 ] . The use of laser-based CGH will also facilitate outdoor implementation for AR, due to the high brilliance of laser light, making it suitable for high-light conditions. Next-generation NEDs may achieve significant performance enhancements, directly leveraging the innovations introduced in CGH technology. Although holographic technology is considered the ultimate 3D display approach [ 7 ] and can deliver realistic virtual images, many limitations still need to be overcome. These include not only the significant computational effort required to calculate holograms but also the limitations of devices that modulate light. In particular, among other limitations, spatial light modulators (SLMs) used in holographic displays are pixelated devices and, as such, they cannot modulate all the light that impinges on them. Indeed, part of the light is reflected back specularly due to various causes, such as unmodulated inter-pixel regions and imperfect anti-reflection coatings, resulting in an unwanted bright spot at the center of any virtual image produced by the SLM, known as the zeroth order diffraction (ZOD). The presence of non-modulated light is a common issue even in advanced implementations [ 7 ] and is usually removed in various ways. The most common method involves spatial filtering by placing an obstructive target in the center of the Fourier plane (2f) of a 4f telescope positioned after the SLM, blocking the non-modulated reflected light at low spatial frequencies. However, this approach requires a bulky 4f system, incompatible with miniaturized AR devices, and results in a dark spot in the center of the virtual image. Alternative approaches involve shifting the projected light away from the ZOD position: laterally, axially or both [ 21 , 11 ] . However, lateral displacement limits the effective field of view and reduces the diffraction efficiency, introducing comatic aberrations into the projected light pattern [ 12 ] . The axial displacement causes the ZOD to shift significantly out of focus from the computed image, but the imposed quadratic phase significantly reduces the axial field of view of the device. Recent studies have demonstrated ZOD suppression through destructive interference schemes that combine two-photon excitation with aberration-based techniques [ 5 , 20 ] . Although these nonlinear approaches have proven effective for multiphoton microscopy, their intrinsic non-linearity makes them incompatible with CGH in the visible wavelength range required by NEDs. In parallel, several linear strategies have been explored to mitigate the zero-order component directly at the SLM level. For example, phase-compression methods [ 10 ] reshape the phase profile to minimize residual non-modulated light, achieving experimentally only a factor of 3 intensity reduction (i.e., ~67\% suppression) with degradation in diffraction efficiency for varying compression factors, thus offering limited robustness across different hologram patterns. Similarly, interferometric correction schemes based on an auxiliary beam [ 6 ] promise high suppression through destructive interference (up to 99\% in simulations), but experimentally deliver just 32\% due to mismatches in phase and amplitude calibration. In this work, we introduce a camera-in-the-loop interferometric calibration that retrieves a system-specific, pixel-wise corrective phase map to suppress the ZOD via destructive interference. After calibration, the same phase map can be applied to arbitrary holograms, enabling full field of view operation without external spatial filtering. 2 Method In Fourier-transform CGH, the above mentioned unwanted light component manifests as a strong ZOD peak in the center of the spatial-frequency plane, where the virtual image is generated. Our method engineers the SLM’s phase pattern to shape a portion of the modulated light into a corrective optical field. This field is designed to have the same intensity and the exact opposite phase as the native ZOD, allowing the two fields to cancel each other upon interference and effectively suppress the central spot without degrading the reconstructed image. The entire process is divided into four key stages: 1. Initial estimation of the ZOD corrective beam amplitude. 2. Application of a uniform phase pattern (“piston sweep”) to probe the corrective beam phase. 3. Pixel-resolved retrieval of the non-uniform corrective phase map using the camera. 4. Precise mapping of the corrective phase from camera to SLM coordinates, followed by recursive optimization until convergence. A schematic of the iterative process is reported in Fig. 1 (d). The procedure requires a dedicated setup, shown in Fig. 1 (a), that includes a camera (Cam1) conjugated to the SLM plane through a 4f telescope. A pinhole is positioned in the Fourier plane of the first lens (2f), in order to block all the hologram light not directly addressed at the ZOD location, therefore, behaving as a low pass filter. A second camera (Cam2) images the Fourier plane without any spatial filtering. This second camera is also employed for the precise calibration of the SLM to ensure a linear phase response over the entire 0 to 2\pi range. An accurate phase calibration of the SLM, as detailed in [ 2 ] , is a crucial prerequisite for the correct implementation of the proposed method. The four steps of the process are described in details below. After retrieving the ideal phase map, the 4f setup can be dismantled and the SLM can be used with no additional optics, or in a separate optical setup. 2.1 Coefficient Estimation of Interfering Beams The process starts by estimating the ratio between the amplitude of the ZOD field and that of the hologram. This is done by uploading a phase map \Phi_{\mathrm{Holo}} to the SLM that encodes an arbitrary virtual image, with the unique constraint of contributing zero intensity

Read the complete text