Optical steering of a large ring laser

Jannik Zenner, Karl Ulrich Schreiber, Simon Stellmer · 2026

Read Optical steering of a large ring laser by Jannik Zenner, Karl Ulrich Schreiber, Simon Stellmer (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-19676.txt.

Introduction

Jannik Zenner, Karl Ulrich Schreiber, and Simon Stellmer work on giant ring lasers. A longer laser cavity gives a narrower, purer beam. In large gas lasers, though, the gap between the cavity's natural tones shrinks. It can become far smaller than the width of the gain profile that feeds the laser.

That crowding means many tones can grow at once, spoiling the single clean tone users want. The authors study how to steer the light in such a large ring. Optical steering offers a way to favour the desired mode. Large ring lasers serve in precision measurement, including rotation sensing for geodesy. Controlling their modes keeps those measurements sharp.

Catalog record

CREATORJannik Zenner, Karl Ulrich Schreiber, Simon Stellmer
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE17 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-19676

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Optical steering of a large ring laser Jannik Zenner, Karl Ulrich Schreiber, Simon Stellmer Abstract A common approach to reduce the linewidth of a laser is an increase of its resonator length. In large gas lasers, however, the frequency spacing between longitudinal modes of the resonator easily becomes significantly smaller than the Doppler-broadened width of the gain profile. As a consequence, the laser might operate on a multitude of modes simultaneously, or jump between modes. Such unstable operation cannot be tolerated in metrological or sensing applications, such as ring laser gyroscopes. Here, we propose and demonstrate a method to establish stable operation on a chosen mode index by optically steering the ring laser to a desired mode index through injection locking with an external laser. The injected mode reliably follows the external steering. Intra-cavity backscattering can even cause the counter-propagating, non-injected mode to follow the external steering as well. I Introduction Injection locking of lasers 17 is a well-established technique and often used in a so-called master/slave configuration, where a ”master” laser (often narrow-linewidth and well-controlled in frequency) provides the seed for a much more powerful “slave” laser. This second laser then follows the phase and frequency of the seed laser. This method is widely used in solid-state lasers but has, to our knowledge, only rarely been applied to gas lasers. Examples include Ar ion lasers 11 and He-Ne lasers 17 ; 5 , where two lasers of the same kind have been coupled. Large He-Ne ring lasers 13 ; 14 ; 4 ; 7 may feature a perimeter P larger than 10\text{\,}\mathrm{m} , corresponding to a free spectral range f_{\text{FSR}}=c/P of less than 30\text{\,}\mathrm{MHz} . The width of the gain profile in He-Ne lasers at a lasing frequency f_{\text{L}} is determined by the thermal Doppler profile of the neon gas 16 : \displaystyle\Delta f_{\text{FWHM}}=\frac{f_{\text{L}}}{c}\sqrt{\frac{8\ln(2)k_{\text{B}}T}{m}}. (1) The gas temperature of the gain medium can be assumed to be T= 300\text{\,}\mathrm{K} for low plasma pumping power 8 used in sensor applications. Further, an average atomic mass of m= 21\text{\,}\mathrm{u} is assumed for the commonly used 50/50 mixture of the 20 Ne and 22 Ne isotopes. The Doppler-broadened width of the gain curve then amounts to 1.3\text{\,}\mathrm{GHz} . Near its maximum, the gain curve is essentially flat, and the laser operates multi-mode on a stochastic composition of longitudinal mode indices near the gain maximum. Drastic reduction of the driving power to just above the lasing threshold (“gain starvation”) will enforce single-mode operation, but the mode index will be chosen randomly from the mode indices within about 50\text{\,}\mathrm{MHz} around the gain maximum. If not sufficiently stable, the laser might jump between different modes, run multi-mode, or operate on different mode indices for the two counter-propagating modes (“split mode”) 2 . The commonly used procedure to establish single-mode operation on a specific mode index is based on cycles of a deliberate increase and slow decrease in driving power, which are repeated until both counter-propagating modes – by chance – operate on the same desired mode index (“common mode”). A single such cycle may take minutes, rendering the procedure unsuitable if 100% uptime is required. In addition, variations in driving power and circulating optical power induce thermal instabilities that degrade performance. In this Letter, we present a purely optical approach in which an external diode laser is injected into the large ring resonator of a He-Ne laser at a given mode index, forcing the He-Ne gas laser to jump to this mode as well. The injection laser is turned on only intermittently, and the gas laser follows suit on a timescale of milliseconds, given by the cavity decay time. The counter-propagating mode, important for gyroscope operation in the Sagnac scheme, may follow the injection laser through plasma-enhanced backscatter coupling 9 after a phase of split-mode operation. Importantly and different from common injection-locking schemes, the external light is injected only temporarily, and sensing in gyroscope operation is performed without injection light present. II Setup Figure 1: Schematic view of the 14\text{\,}\mathrm{m} perimeter ring laser cavity. The Sagnac and f_{\text{FSR}} beats are measured with different photodiodes at the north corner. The external laser is injected in clockwise direction at the east corner. At the west corner, the clockwise transmission is coupled into a fiber to be evaluated by a wavelength meter and the counter-clockwise transmission is used to stabilize the lasing intensity of the active ring laser. The setup, as shown schematically in Fig. 1 , is based on a square ring laser cavity of 3.5\text{\,}\mathrm{m} side length inside a vacuum chamber, described in detail elsewhere 12 ; 15 . The resonator is formed by four mirrors with a radius of curvature of 4\text{\,}\mathrm{m} and a finesse of about F= 36,000. The free spectral range of the cavity is f_{\text{FSR}}=c/P= 21.42\text{\,}\mathrm{MHz} , equating to a cavity linewidth f_{\text{FWHM}}=f_{\text{FSR}}/F of about 600\text{\,}\mathrm{Hz} . The ring laser is operated in s-polarization. The penetration depth into the mirror coatings is polarization-dependent, causing small differences in P between s- and p-polarization that split the respective resonances by many MHz. When operated as an active ring laser gyroscope, as described in Ref. 18 , the lasing power is stabilized with a feedback loop acting on the power of the radio frequency drive that excites the plasma. The signal is acquired from the counter-clockwise transmission signal of about 90\text{\,}\mathrm{nW} , detected on the PD {}_{\text{INT}} photodiode in the west corner. Both, the clockwise and counter-clockwise transmissions are combined with a non-polarizing beam splitter cube at the north corner. If the lasing occurs on common modes, the 50\text{\,}\mathrm{kHz} bandwidth PD {}_{\text{SAG}} photodiode records a Sagnac beat frequency \delta f that is proportional to the sensor’s rotation rate \Omega according to \displaystyle\delta f=\frac{4A}{\lambda P}\Omega\sin\theta, (2) where A is the area, \lambda is the wavelength of the light and \theta is the projection angle of the surface vector onto the rotation vector, i.e. the latitude of \theta=50^{\circ} 43’ 41.9” N. The other output of the beam combiner is recorded with a fast 400\text{\,}\mathrm{MHz} bandwidth photodiode PD {}_{\text{FSR}} , which allows observation of a beat frequency at multiples of f_{\text{FSR}} , if the ring laser is operating in split mode. An external diode laser (TOPTICA DL PRO) tuned to the same frequency as the active He-Ne laser is frequency-modulated at 5\text{\,}\mathrm{MHz} by an electro-optical modulator, frequency shifted by an acusto-optical modulator (AOM), and passed through a polarization-maintaining fiber to be coupled into the ring cavity at its east corner. The reflection of these 185\text{\,}\mathrm{\SIUnitSymbolMicro W} of light is detected with a 150\text{\,}\mathrm{MHz} bandwidth photodetector PD {}_{\text{PDH}} to perform a Pound-Drever-Hall lock 1 of the diode laser using a fast proportional-integral-derivative (PID) controller (TOPTICA FALC PRO). This stabilizes the laser frequency to the center of a cavity resonance, within about 100\text{\,}\mathrm{Hz} . As previously shown for this setup 19 , passive operation of the ring cavity, which is currently a research field of major interest 6 ; 3 , may occur independently from the active gas laser operation. Careful positioning of the cavity mirrors to within 50\text{\,}\mathrm{\SIUnitSymbolMicro m} of a geometrical plane, beamwalking of the incoupling of the injection, and the intrinsic behavior of the 4\text{\,}\mathrm{mm} diameter plasma cell tube as an aperture, all lead the active ring

Read the complete text