Stacked Intelligent Metasurfaces-Based Electromagnetic Wave Domain Interference-Free Precoding
Hetong Wang, Yashuai Cao, Tiejun Lv, Jintao Wang · 2026
Read Stacked Intelligent Metasurfaces-Based Electromagnetic Wave Domain Interference-Free Precoding by Hetong Wang, Yashuai Cao, Tiejun Lv, Jintao Wang (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-19313.txt.
Introduction
Hetong Wang and three co-authors cancel interference between data streams by shaping waves in the air itself. Stacked intelligent metasurfaces are layers of tunable sheets that bend radio waves as they pass. The team uses them to build a multi stream transmission scheme that aims to be free of interference by design.
Their angle is fresh: instead of fighting interference at the receiver, they exploit it in the wave domain. Constructive interference can add signal rather than noise when the waves are shaped right. Such schemes could lift the capacity of dense wireless links without more spectrum.
Catalog record
| CREATOR | Hetong Wang, Yashuai Cao, Tiejun Lv, Jintao Wang |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 83 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-19313
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Stacked Intelligent Metasurfaces-Based Electromagnetic Wave Domain Interference-Free Precoding Thanks: Manuscript received 4 March 2025; revised 20 November 2025; accepted 14 January 2026. This paper was supported in part by the National Natural Science Foundation of China under No. 62271068, MOE (Ministry of Education, Singapore), under MOE Tier 2 Award number T2EP50124-0032. ( corresponding author: Tiejun Lv .) Thanks: Hetong Wang and Tiejun Lv are with the School of Information and Communication Engineering, Beijing University of Posts and Telecommunications (BUPT), Beijing 100876, China (e-mail: {htwang_61, lvtiejun}@bupt.edu.cn) Thanks: Y. Cao is with the School of Intelligence Science and Technology, University of Science and Technology Beijing, Beijing 100083, China (e-mail: [email protected]). Thanks: Jintao Wang is with the Department of Electronic Engineering, Tsinghua University, Beijing 100084, China, also with the State Key Laboratory of Space Network Communications, Beijing 100084, China, and also with the Beijing National Research Center for Information Science and Technology (BNRist), Beijing 100084, China (e-mail: [email protected]). Thanks: Ni Wei is with the School of Information Science and Engineering, Fudan University, Shanghai 200433, China (e-mail: [email protected]). Thanks: Jiancheng An and Chau Yuen are with the School of Electrical and Electronics Engineering, Nanyang Technological University, Singapore 639798 (e-mail: [email protected], [email protected]). Hetong Wang, Yashuai Cao, Tiejun Lv, Jintao Wang Abstract This paper introduces an interference-free multi-stream transmission architecture leveraging stacked intelligent metasurfaces (SIMs), from a new perspective of interference exploitation. Unlike traditional interference exploitation precoding (IEP) which relies on computational hardware circuitry, we perform the precoding operations within the analog wave domain provided by SIMs. However, the benefits of SIM-enabled IEP are limited by the nonlinear distortion (NLD) caused by power amplifiers. A hardware-efficient interference-free transmitter architecture is developed to exploit SIM’s high and flexible degree of freedom (DoF), where the NLD on modulated symbols can be directly compensated in the wave domain. Moreover, we design a frame-level SIM configuration scheme and formulate a max-min problem on the safety margin function. With respect to the optimization of SIM phase shifts, we propose a recursive oblique manifold (ROM) algorithm to tackle the complex coupling among phase shifts across multiple layers. A flexible DoF-driven antenna selection (AS) scheme is explored in the SIM-enabled IEP system. Using an ROM-based alternating optimization (ROM-AO) framework, our approach jointly optimizes transmit AS, SIM phase shift design, and power allocation (PA), and develops a greedy safety margin-based AS algorithm. Simulations show that the proposed SIM-enabled frame-level IEP scheme significantly outperforms benchmarks. Specifically, the strategy with AS and PA can achieve a 20 dB performance gain compared to the case without any strategy under the 12 dB signal-to-noise ratio, which confirms the superiority of the NLD-aware IEP scheme and the effectiveness of the proposed algorithm. I Introduction Low cost, low power consumption, and high-speed transmission are critical requirements for future mobile communications [ 15 , 18 ] . In 2020, the ITU-R WP5D working group assessed the future directions of sixth-generation (6G) development, emphasizing that the key driving force is to improve spectral efficiency and energy efficiency (EE), and reduce power consumption [ 43 ] . In pursuit of the 6G vision, reconfigurable intelligent metasurface (RIS) has been viewed as a critical technology due to its low cost and high spectral efficiency [ 48 ] . RISs have shown great potential to improve spatial division multiplexing capabilities [ 45 ] . However, such a single-layer metasurface for electromagnetic (EM) phase control has a severe efficiency limitation, hindering the practical application of RIS. To overcome the limitation, stacked intelligent metasurfaces (SIMs) [ 3 ] have been proposed to provide more degrees of freedom (DoFs) for manipulating EM of signals [ 51 ] . Joint control of both phase and amplitude of SIMs enables more efficient computation in the analog domain [ 37 ] . Modulation, precoding, or other signal filtering can be operated without dedicated hardware. Current studies on RIS and SIM focus on block-level precoding (BLP), which aims to suppress interference between signal streams within channel coherence time blocks (or frames). In practice, it is challenging to eliminate interference, which requires substantial and expensive active hardware. To this end, the symbol-level precoding (SLP) technique [ 36 ] has been proposed, which converts interference into constructive power. Compared to anti-interference precoding, the key difference is that SLP designs precoding by simultaneously utilizing both channel and data symbol information. This method eliminates inter-stream interference and only requires a low-complexity interference-free receiver. However, the SLP can dramatically increase the transmitter complexity due to frequent optimization on a symbol basis. While SIMs can achieve more complicated precoding operations with programmable wave-based analog computing, three key challenges arise in SIM-enabled precoding: 1) Existing beam design of SIM under Gaussian input assumptions inevitably leads to a degradation in communication performance, calling for a finite-alphabet-oriented design; 2) hardware impairments may distort the transmission of SIM-enabled wave domain modulation symbols; and 3) the fixed number of antennas in SIM-assisted wireless systems fails to provide additional DoFs for beam control, and lacks the flexibility to adapt to varying propagation environments and dynamic user distributions. I-A Related Work I-A 1 Symbol-Level and Frame-Level Precoding Compared to anti-interference BLP, classic SLP harvests constructive power from interference by pushing the received digital symbol away from the decision boundary [ 27 ] . The distance between the received digital symbol and the decision boundary is defined as the safety margin [ 31 ] . By maximizing the safety margin, the symbol error rate (SER) performance can be improved while reducing transmit power consumption. To reap the benefits of SLP, some SLP works attempt to deal with intensive optimization of precoding per symbol [ 23 , 49 , 16 ] . However, these methods are still limited to per-slot precoding framework by only simplifying the derivation complexity. To avoid frequent precoding calculations, Li et al. [ 25 ] applied a constant precoding matrix within a channel-coherent time frame by optimizing the average SER performance across all symbols. As this approach utilizes inter-stream interference to design the precoding per frame, it is termed interference exploitation precoding (IEP). While frame-level IEP alleviates the complexity of traditional SLP, complicated precoding operations depend on massive expensive hardware elements, e.g., high-precision analog-to-digital converters (ADC) and radio frequency (RF) chains. I-A 2 Single-Layer Intelligent Metasurface-Assisted Precoding The RIS offers a low-cost solution to transceiver hardware via passive signal manipulation. Current RIS-assisted communications are mainly designed based on the assumption of Gaussian signal input. It has been shown that beamforming designs for Gaussian inputs are suboptimal for communication systems with finite alphabet sets [ 21 ] . Motivated by this, reflection-type metasurface-assisted SLP schemes [ 53 , 26 , 34 , 32 , 33 ] have emerged. In [ 53 ] , the base station (BS) adopted the SLP to minimize the transmit power with the cascaded links of RIS. In [ 26 , 34 ] , a RIS-assisted multi-user multiple input single output (MU-MISO) communication system was studied, where constructive interference (CI) is achieved by the collaboration between the BS and RIS. Notably, several studies have explored using single-layer RIS as a direct precoder. Instead of operating as a passive relay, the single-layer RIS with an RF generator was integrated in [ 32 ] , to serve as a transmitter and modulate