Broadband Heterodyne Microwave Detection using Rydberg Atoms with High Sensitivity
Hsuan-Jui Su, Shao-Cheng Fang, Ting-An Li, Chen-Hao Chang, Yu-Chi Chen, and Yi-Hsin Chen · 2026
Read Broadband Heterodyne Microwave Detection using Rydberg Atoms with High Sensitivity by Hsuan-Jui Su, Shao-Cheng Fang, Ting-An Li, Chen-Hao Chang, Yu-Chi Chen, and Yi-Hsin Chen (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-19305.txt.
Introduction
Hsuan-Jui Su and five co-authors sense microwaves with atoms tuned to catch radio waves. Rydberg atoms, atoms puffed into high energy states, react strongly to electric fields. A microwave field splits their spectral lines in a pattern called Autler-Townes splitting, which the team reads as their signal.
From that one pattern they pull out both the field's frequency and its strength at once. Their sensor spans a broad band with high sensitivity and a wide range. Atom based sensors could one day calibrate radio gear and map fields with a standard set by atoms themselves.
Catalog record
| CREATOR | Hsuan-Jui Su, Shao-Cheng Fang, Ting-An Li, Chen-Hao Chang, Yu-Chi Chen, and Yi-Hsin Chen |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 32 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-19305
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Broadband Heterodyne Microwave Detection using Rydberg Atoms with High Sensitivity Preprint: APS/123-QED Hsuan-Jui Su, Shao-Cheng Fang, Ting-An Li, Chen-Hao Chang, Yu-Chi Chen, and Yi-Hsin Chen Abstract We present a Rydberg atom-based microwave electric field sensor that achieves extended dynamic range and enhanced sensitivity across a broad bandwidth. By characterizing the Autler-Townes (AT) splitting induced by a single-tone microwave field, we demonstrate a spectroscopic method that simultaneously extracts both the microwave frequency and electric field strength directly from the splitting pattern. We implement dual-tone heterodyne detection, achieving a minimum detectable field strength on the order of μ \mu V/cm and a sensitivity in the sub- μ V/cm / Hz \mu\text{V/cm}/\sqrt{\text{Hz}} regime, while extending the operational bandwidth up to 3 GHz. Through systematic characterization of frequency and power dependencies, we identify optimal operating conditions to minimize power broadening in the resonant AT regime and maximize sensitivity in the far-off-resonance AC Stark regime. The resulting platform combines high sensitivity, broad bandwidth, and a dynamic range of approximately 90 dB, establishing Rydberg atoms as practical sensors for precision electric field metrology. I Introduction Recent advances in Rydberg atom-based detection have enabled highly accurate electromagnetic field sensing, offering significant advantages over traditional microwave receivers 1 ; 14 . By utilizing the strong electric dipole moments of Rydberg atoms and the enhanced sensitivity provided by electromagnetically induced transparency (EIT), atomic sensors can precisely measure radio frequency (RF) fields across a wide frequency range from 100 MHz to over 1 THz 10 ; 17 ; 30 . This technology is essential for data communication and remote sensing, drawing broad academic and industrial interest, and supports measurements of electric field amplitude, polarization 21 , phase 27 , incident angle 19 ; 20 , as well as microwave imaging 5 . Recent work has demonstrated that microwave-assisted EIT spectroscopy enables high-precision measurement of Rydberg transition frequencies and quantum defects in atomic vapor cells 12 . Furthermore, these advances have facilitated the demonstration of miniaturized quantum sensors, paving the way for compact and practical devices in real-world applications. Key performance factors for electric field sensors include measuring frequency range, minimum detectable field, sensitivity, and the dynamic range of detectable power. For example, an electric field sensitivity of up to 1.5 \mu V/cm/ \sqrt{\rm{Hz}} , 80-dB linear dynamic range, and over 1 GHz of continuous frequency range has been reported in Ref. 15 . To enhance the sensitivity of microwave electric field measurements with Rydberg EIT, several strategies have been developed. Selecting Rydberg states with higher principal quantum numbers increases the atomic dipole moment, thereby strengthening the interaction with the microwave field 22 , while the choice of Rydberg angular states significantly affects the linearity and accuracy of microwave field measurements 4 . Furthermore, it has been demonstrated that optimizing the microwave frequency detuning can improve the sensitivity of electric field measurements based on EIT and Autler-Townes (AT) splitting 25 . Narrowing the EIT linewidth allows for more precise resolution of AT splitting, while optimizing beam alignment and polarization further improves EIT contrast and detection sensitivity. The measurement range can be extended to lower field strengths by employing dual-tone or auxiliary microwave driving schemes 9 ; 8 . In addition, incorporating sub-wavelength resonator structures, such as split-ring resonators, enables the detection of much weaker fields 6 . Multi-photon excitation schemes, including three-photon AT splitting in cold cesium Rydberg gases, offer enhanced capabilities for the control and precise detection of Rydberg states 2 . Advanced signal extraction techniques, such as lock-in amplification and superheterodyne detection, can isolate weak field-induced features from noise, achieving sensitivities down to the sub- \mu V/m/ \sqrt{\rm{Hz}} level 11 ; 18 ; 13 . Together, these methods enable highly accurate and sensitive microwave field measurements using Rydberg atom-based sensors. To extend the detectable frequency range, the Zeeman and AC Stark effects can be also employed to achieve continuous frequency tunability in measurements 15 ; 7 ; 23 . Reference 26 demonstrated that introducing a second microwave field, resonant with an adjacent Rydberg transition, induces an AC Stark shift, enabling continuous and tunable frequency detection across neighboring Rydberg states. This improved tunability has opened up new opportunities for applications utilizing a planar microwave waveguide, which effectively operates across a frequency range of 0 to 20 GHz 16 . In this work, we develop a microwave electrometry technique using dual-tone heterodyne detection in a Rb vapor cell, building upon our prior Rydberg EIT studies 29 ; 28 ; 3 . Our approach employs a strong local oscillator (LO) that interacts with a weak signal field detuned by a few tens of kHz, allowing the resulting beat notes to be detected via Rydberg-EIT spectroscopy. For strong microwave fields, the signal strength is characterized by AT splitting, while in the weak-field regime, the beat signals are analyzed using the Fast Fourier Transform (FFT) of the oscilloscope. Through systematic characterization, we identify optimal operating conditions by tuning the LO to resonant AT transitions and employing moderate field power to avoid power broadening. This optimization enables precise detection with a minimum detectable field of 2.4~\mu V/cm and a sensitivity of \rm{760~nV/cm/\sqrt{Hz}} , while extending the dynamic range to over 60 dB and supporting MW frequency tuning up to 3 GHz. Furthermore, employing the AT splitting regime with a single microwave field extends the measurement capability, resulting in a total dynamic range of approximately 90 dB. Ultimately, this platform combines high sensitivity, broad bandwidth, and wide dynamic range, positioning Rydberg atoms as practical sensors for spectrum monitoring, electromagnetic compatibility testing, and precision metrology. II Setup and Methods II.1 Energy level and laser system The experiment is carried out in a Rb vapor cell at around 60 ∘ C. Two laser beams construct a three-level ladder-type EIT system, and microwave fields further couple two Rydberg states, as illustrated in Fig. 1 . The probe beam, with a wavelength of 780 nm (Toptica DL pro), was locked in the transition from the ground state |5S_{1/2},F=2\rangle to the excited state |5P_{3/2},F^{\prime}=3\rangle via the saturation absorption spectroscopy. Meanwhile, the coupling beam, with a wavelength of 480 nm (Toptica DL pro HP 480), was frequency scanned across the transition from the excited state to the Rydberg states |53D\rangle . These two laser beams counter-propagate through a cylindrical Rb vapor cell with a length of 75 mm and a diameter of 25 mm. The laser polarizations are adjusted to \sigma^{+} in order to optimize the Rydberg EIT signal 29 . The probe beam has a 1/e^{2} waist radius of 810 \mu m and an intensity of 28 mW/cm 2 , while the coupling laser has a radius of 820 \mu m and a power of 35 mW. A photodetector (PD3 in Fig. 1 (b)) monitors the probe transmission to detect the Rydberg EIT signal as the coupling laser is scanned, or the heterodyne beat-note signal when the coupling frequency is fixed. The beat-note signal is analyzed using the FFT function of an R \& S RTO64 oscilloscope. Laser frequency is calibrated using a separate Rydberg EIT reference system in an independent cylindrical cell, referred to as the Ref. Cell. Figure 1: (a) Energy level diagram for {}^{87}\rm{Rb} . Atoms are excited to the |53D\rangle Rydberg states from the ground state