Strain-transport superposition in shear-thinning dense non-Brownian suspensions

Rishabh V. More · 2026

Read Strain-transport superposition in shear-thinning dense non-Brownian suspensions by Rishabh V. More (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-18805.txt.

Introduction

Rishabh More studies why thick mixes of grains in a fluid grow thin as they are stirred fast. Such a mix is called a dense suspension: grains crowd a fluid so thick that they brush and press as they pass. As the stir rate climbs, the mix flows with more ease. That shift is most oft blamed on how the grains line up and pack as they flow.

More runs sims that track each grain in mixes that thin by un-like tricks of push and pull. Some grains draw near, some push off, and some grip with a force that leans on the load. In all of them, one rule holds: how far grains stray from the smooth flow is set by the stir rate alone. The pack, the line-up, and the kind of push do not shift that stray.

Catalog record

CREATORRishabh V. More
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE23 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-18805

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Strain-transport superposition in shear-thinning dense non-Brownian suspensions Preprint: APS/123-QED Rishabh V. More Abstract Shear thinning in dense non-Brownian suspensions is commonly attributed to shear-induced microstructural evolution, including changes in structural alignment, anisotropy, and near-contact statistics, yet how these structural changes influence particle-scale dynamics remains unclear. Using particle-resolved simulations of dense suspensions that shear thin through diverse microscopic mechanisms—including short-range attraction, repulsion, and load-dependent friction—we show that the magnitude of non-affine particle velocities is controlled solely by the imposed shear rate, independent of coordination number, structural anisotropy, and interaction details. In contrast, macroscopic stress and viscosity remain strongly sensitive to the underlying interaction mechanism. When mean-squared displacements measured transverse to the flow are rescaled by accumulated strain and by the non-affine velocity variance, data from all cases collapse onto a single master curve, revealing strain-controlled transport with a robust crossover from ballistic to diffusive dynamics. These results demonstrate a fundamental decoupling between particle-scale kinematics and macroscopic rheology in shear-thinning dense suspensions and identify non-affine velocity fluctuations as the emergent dynamical scale governing shear-driven particle transport. Introduction. Shear thinning—the decrease of viscosity \eta with increasing shear rate \dot{\gamma} —is a ubiquitous feature of driven soft matter, spanning polymeric liquids, colloidal dispersions, emulsions, and dense suspensions Ewoldt and Saengow 2022 . In dense non-Brownian suspensions, shear thinning is commonly observed at high (but well below jamming) volume fractions and often precedes shear thickening or shear jamming at higher stress or under different particle-scale constraints Ellero 2022 ; Chatté et al. 2018 . While shear thickening now admits a quantitative microscopic framework based on stress-activated constraints and frictional contact networks Guazzelli and Pouliquen 2018 ; Morris 2020 ; Ness et al. 2022 ; Wyart and Cates 2014 ; Seto et al. 2013 , the corresponding organizing principle for shear thinning remains less clearly established Ellero 2022 . Classically, shear thinning has been attributed to flow-induced microstructural reorganization, including changes in near-contact statistics, anisotropic pair correlations, and the formation or breakup of transient structures that alter dissipation pathways Hoffman 1972 ; Brady and Morris 1997 ; Wagner and Brady 2009 ; Vázquez-Quesada et al. 2016 . However, dense suspensions with different microscopic interactions—attraction, repulsion, or friction—often exhibit comparable shear-thinning trends despite exhibiting markedly different steady-state coordination, anisotropy, and force networks Guazzelli and Pouliquen 2018 ; More and Ardekani 2021 ; Khan et al. 2023a . This raises a fundamental question: is shear thinning governed primarily by interaction-specific microstructural relaxation, or by some other physics? At the particle scale, shear-driven suspensions display strong non-affine motion and correlated rearrangements, leading to shear-induced dispersion even in the absence of thermal noise Leighton and Acrivos 1987 ; Brady and Morris 1997 . In shear-thickening and near-jamming regimes, these kinematic fluctuations become tightly coupled to stress transmission through growing contact networks and correlated clusters Seto et al. 2013 ; Singh et al. 2020 ; Singh and Saitoh 2023 ; Clavaud and Singh 2025 . By contrast, in shear-thinning states, the particle network reorganizes without an obvious signature in particle-scale transport. It remains unclear whether non-affine motion in this regime is controlled by interaction-specific mechanisms or by a different, more general dynamics. In this Letter, we establish a kinematic framework for shear thinning in dense non-Brownian suspensions. Using particle-resolved simulations under steady shear at a rate \dot{\gamma} , we systematically vary microscopic interaction mechanisms responsible for shear-thinning—including attractive Singh et al. 2019 , repulsive Chatté et al. 2018 ; More and Ardekani 2021 , and load-dependent frictional interactions More and Ardekani 2020a ; Khan et al. 2023b ; Lobry et al. 2019 —and measure microstructure, velocity correlations, non-affine velocity fluctuations \langle|\mathbf{v}_{\mathrm{na}}|^{2}\rangle , and particle transport. Results presented identify non-affine velocity fluctuations as the emergent dynamical scale governing shear-driven particle transport, leading to a strain-transport superposition that demonstrates a fundamental decoupling between kinematics and stress in shear-thinning dense non-Brownian suspensions. The simulation setup and microstructural metric probed are described in the Appendix, with full details provided in the Supplemental Information (SI), which together support and complete the results and discussion presented here. Figure 1: (Color online) Microscopic interaction models and resulting shear-thinning rheology in dense suspensions. (a) Schematic of the short-range pairwise force laws used in the simulations, including attractive and repulsive interactions of varying strength and a load-dependent friction model. (b) Relative viscosity \eta_{r}=\eta/\eta_{0} as a function of dimensionless shear rate \dot{\gamma}/\dot{\gamma}_{0} for frictionless particles ( \mu=0 ). (c) Relative viscosity \eta_{r} versus \dot{\gamma}/\dot{\gamma}_{0} for frictional particles ( \mu=1 ). Despite their distinct microscopic origins, all interaction models exhibit pronounced shear thinning, while differing substantially in the magnitude and shear-rate dependence of the stress response. Lines in (b) and (c) are guides to the eye only. Interaction models and force scales. All interaction strengths between particles of size a are expressed relative to the characteristic hydrodynamic force scale F_{0}=\eta_{0}\dot{\gamma}_{0}a^{2} , which also sets the characteristic shear rate \dot{\gamma}_{0} , where \eta_{0} is the (constant) Newtonian solvent viscosity. Rate dependence arises from competition between F_{H}\sim\eta_{0}\dot{\gamma}a^{2} and non-hydrodynamic forces, each introducing a stress scale \sim|F_{\alpha}|/a^{2} . Short-range repulsion (R) and attraction (A) act normal to particle surfaces with fixed range \lambda=0.02a and magnitudes F_{R} and F_{A} as depicted in Fig. 1 a; we study F_{A}/F_{0}=\{0.1,1,10\} and F_{R}/F_{0}=\{100,1000\} to vary strength of these interactions from weak, moderate to strong. Contact forces are activated upon overlap and follow a Hertzian normal law with Coulomb friction Luding 2008 . Except for the normal load-dependent ( F_{n} ) friction case (LD- \mu ), the friction coefficient is constant with \mu=0 or \mu=1 ; in LD- \mu , \mu(F_{n})=0.27\,\coth\!\left[0.27\left(\frac{F_{n}}{F_{0}}\right)^{0.35}\right], (1) so that friction weakens with increasing normal load More and Ardekani 2020a ; Khan et al. 2023b ; Lobry et al. 2019 . All interaction cases are summarized in Table 1 with mathematical details in SI. Fig. 1 (a) illustrates the short-range pairwise force laws used to model attractive and repulsive interactions of varying strength, as well as a load-dependent friction model. Although these interaction rules correspond to distinct physical mechanisms, all give rise to shear thinning in dense suspensions. Table 1: Interaction cases. Forces are scaled by F_{0}=\eta_{0}\dot{\gamma}a^{2} . The repulsive interaction has Debye length \lambda=0.02a . Unless noted, friction is constant with \mu\in\{0,1\} . HS = Hard Sphere Case F_{A}/F_{0} F_{R}/F_{0} friction Baseline (HS) 0 0 \mu=0 or 1 A0.1 0.1 0 \mu=0 or 1 A1 1 0 \mu=0 or 1 A10 10 0 \mu=0 or 1 R100 0 100 \mu=0 or 1 R1000 0 1000 \mu=0 or 1 LD- \mu 0 0 \mu(F_{n}) (Eq. (1)) Microscopic interactions and shear-thinning rheology. Fig. 1 (b) and (c) show the relative viscosity \eta_{r}=\eta/\eta_{0} , where \eta is the suspension viscosity, as a function of the dimensionless shear rate \dot{\gamma}/\dot{\gamma}_{0} for frictionless ( \mu=0 ) and frictional ( \mu=1 ) particles, respectively. In all cases, the suspensions exhibit pronounced shear thinning over several decades in \dot{\gamma} . The magnitude and shear-rate dependence of the \eta_{r} , however, vary strongly with the microscopic interaction mechanism. Strongly attractive systems display large \eta_{r} at low shear rates followed by substantial thinning, whereas purely repulsive systems exhibit a comparatively weaker shear-rate dependence. Suspensions with load-dependent friction show intermediate behaviour, reflecting the gradual weakening of frictional resistance with increasing shear. Frictional systems have higher

Read the complete text