Assessing astrophysical foreground subtraction in DECIGO using compact binary populations inferred from the first part of the LIGO-Virgo-KAGRA’s fourth observation run

Takahiro S. Yamamoto · 2026

Read Assessing astrophysical foreground subtraction in DECIGO using compact binary populations inferred from the first part of the LIGO-Virgo-KAGRA’s fourth observation run by Takahiro S. Yamamoto (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-18378.txt.

Introduction

Takahiro Yamamoto studies a space task that aims to hear a faint hum from the young cosmos. The craft, called DECIGO, will listen for waves in space in a band where pairs of dense dead stars make a loud front noise. Those pairs spiral in and merge, and their waves crowd the band.

To hear the faint hum, staff must first strip that front noise away. Yamamoto checks how well that strip can work. He bases the check on what a past run of ground based sensors has taught us about such pairs. The count of pairs and their traits set how much noise is left. If too much noise stays, the old hum stays hid. If the strip works well, the craft could open a new view on the first age of the cosmos.

Catalog record

CREATORTakahiro S. Yamamoto
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE34 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-18378

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Assessing astrophysical foreground subtraction in DECIGO using compact binary populations inferred from the first part of the LIGO-Virgo-KAGRA’s fourth observation run Preprint: RESCEU-3/26 Takahiro S. Yamamoto Abstract Detecting the stochastic gravitational wave background (SGWB) from our Universe under the inflationary era is one of the primary scientific objectives of DECIGO, a space-borne gravitational wave detector sensitive in the ∼ 0.1 Hz \sim$0.1\text{\,}\mathrm{H}\mathrm{z}$ frequency band. This frequency band is dominated by the gravitational waves from inspiraling compact object binaries. Subtracting these signals is necessary to search for the primordial SGWB. In this paper, we assess the feasibility of the subtraction of such binary signals by employing the population model inferred from the latest gravitational wave event catalogue of the LIGO-Virgo-KAGRA Collaboration. We find that the projection scheme, which was originally proposed by Cutler & Harms (2005), is necessary to reduce the binary signals to the level where DECIGO can detect the primordial background. I Introduction It is believed that our Universe experienced the accelerated expansion, called inflation , at its very beginning. Although there are many mechanisms to realize the inflationary expansion, no concrete conclusion has been achieved yet. One of the keys to unveiling the inflationary universe is the primordial SGWB ( SGWB ) that originates from the quantum fluctuation of the tensor perturbation. In this work, we consider the space-based laser interferometer DECIGO 20 as a probe of the primordial SGWB . DECIGO has the sensitivity at the frequency band from 0.01\text{\,}\mathrm{H}\mathrm{z} to 10\text{\,}\mathrm{H}\mathrm{z} , and their configurations can be optimized for searching primordial SGWB (see Sec. II.1 ). One of the difficulties for DECIGO to detect the primordial SGWB is the presence of a lot of compact binaries, such as BNS and BBH . \Acp GW they emit overlap each other and form the astrophysical SGWB whose power is O(10^{4-5}) times larger than the primordial one. Several strategies have been proposed to address this issue so far. Biscoveanu et al. 5 proposes the Bayesian approach to search for the primordial SGWB in the presence of the astrophysical foreground. Their algorithm simultaneously estimates the parameters characterizing the primordial SGWB and those characterizing the BBH foreground. The global fit 8 ; 22 offers another approach in the context of LISA 7 , the space-borne interferometers aiming for GW in 1\text{\,}\mathrm{m}\mathrm{H}\mathrm{z} frequency band. It is expected to observe a lot of signals overlapping each other in the time domain. The global fit estimates the source parameters for all binaries simultaneously and efficiently, which can be utilized to remove the foreground and search for the primordial SGWB 28 . Cutler & Harms 12 takes the approach to subtract the best-fit waveform of each binary signal. Many of CBC can be identified as individual binaries if they have enough amplitudes for DECIGO to detect. Once we detect them, we can estimate their source parameters and reconstruct their waveform. By subtracting the reconstructed waveforms from the strain data, we can remove the astrophysical SGWB . The remaining components originate from parameter estimation errors and from binaries not detected as individual events. Zhu et al. 34 takes this approach to assess the foreground with the ground-based detectors. In this paper, we assess how effectively the subtraction scheme could suppress the astrophysical SGWB , assuming the latest LVK ( LVK ) Collaboration catalog and inferred population. We follow Cutler & Harms 12 and Rosado 27 for the estimation of the astrophysical SGWB . The population model is taken from the LVK Collaboration’s latest catalog and the inferred population and mass distributions. In Sec II , we explain the settings for our calculation, such as the signal and detector noise model, the population of BBH and BNS , and the procedure for calculating the foreground. As we explain in section II.3 , the astrophysical foreground can be decomposed into three components. We calculate each of them to explicitly show how these three components behave, while assessing the subtractable components is enough to discuss the feasibility of the foreground subtraction. After presenting the results in Sec III , we conclude the paper in Sec IV . Appendix A explains the subtraction strategy and its details for estimating the foreground. The scripte we used in this work is available from https://github.com/tsyamamoto21/subtraction_estimate . II Method II.1 Signal model and detector setup DECIGO is a space-based laser interferometer that was originally proposed by Seto et al. 29 . The configuration is shown in Figure. 1 . Its basic unit consists of three satellites that are located at the corners of an equilateral triangle with the side length of 1000\text{\,}\mathrm{k}\mathrm{m} . The unit orbits around the Sun with maintaining its triangular formation. Each satellite has two free-falling mirrors that serve as test masses. Each pair of two satellites forms a Fabry-Perot cavity and measures the changes in arm lengths induced by gravitational waves. A triangle-shaped laser interferometer is equivalent to two independent L-shaped interferometers that are located at the same place and have orientations with 45 degree offset. The ultimate configuration of DECIGO consists of four units. Two of them are located at different positions on the heliocentric orbit. The other two units are colocated and have the opposite direction, indicated by the six-pointed star in the Figure 1 . The star-like configuration is useful for the correlation analysis. The SGWB , whose realization is determined by a random process, would be detected by taking the correlation between two or more independent detectors. This is a reason why the star-like configuration is proposed. From the star-like configuration, we can calculate the correlations between two L-shaped interferometers with their arms aligned. As a result, the star-like configuration provides us with two correlations. In the following, we assume that we have eight independent L-shaped interferometers and two streams of correlations. We denote them by N_{\mathrm{det}}=8\,,\quad N_{\mathrm{corr}}=2\,. (1) Figure 1: Configuration of DECIGO. In this work, we assume two triangle-shaped consterations and one six-pointed star consteration. The noise level of the laser interferometers is characterized by the PSD ( PSD ), denoted by S_{\mathrm{n}}(f) . It is defined from the Fourier transform of the noise \tilde{n}(f) by \langle\absolutevalue{\tilde{n}(f) \tilde{n}^\ast(f')}\rangle=\frac{1}{2}S_{\mathrm{n}}(f)\delta(f-f^{\prime})\,. (2) We use the PSD shown in 32 , S_{\mathrm{n}}(f)=$7.05\text{\times}{10}^{-48}$\cdot\pqty{1 + \pqty{\frac{f}{f_\mathrm{p}}}^2}+$4.8\text{\times}{10}^{-51}$\cdot\frac{f}{$\pqty{\frac{f}{\qty{1}{Hz}}}\text{\,}\mathrm{H}\mathrm{z}$}^{-4}\cdot\frac{1}{1+(f/f_{\mathrm{p}})^{2}}+$5.33\text{\times}{10}^{-52}$\cdot\frac{f}{$\pqty{\frac{f}{\qty{1}{Hz}}}\text{\,}\mathrm{H}\mathrm{z}$}^{-4}\ $\mathrm{H}\mathrm{z}^{-1}$\,, (3) with f_{\mathrm{p}}=$7.36\text{\,}\mathrm{H}\mathrm{z}$ . Figure 2 shows the PSD of DECIGO. Figure 2: PSD of DECIGO that is taken from Yagi & Seto 32 In this work, we only use the inspiral part of the binaries. We use the angle-averaged GW signal. \tilde{h}(f;\mathcal{M}_{\mathrm{c}},z)=\frac{\sqrt{3}}{2}\mathcal{A}(\mathcal{M}_{\mathrm{c}},z)f^{-7/6}e^{i\Psi(f;\mathcal{M}_{\mathrm{c}})}\,, (4) where \mathcal{A}(\mathcal{M}_{\mathrm{c}},z) is the amplitude, and \Psi(f;\mathcal{M}_{\mathrm{c}}) is the phase. The amplitude is defined by \mathcal{A}(\mathcal{M}_{\mathrm{c}},z)=\frac{1}{\sqrt{30}\pi^{2/3}}\frac{((1+z)\mathcal{M}_{\mathrm{c}})^{5/6}}{d_{\mathrm{L}}(z)}\,, (5) with the chirp mass \mathcal{M}_{\mathrm{c}}=(m_{1}m_{2})^{3/5}/(m_{1}+m_{2})^{1/5} and the luminosity distance d_{\mathrm{L}}(z) . The explicit expression of \Psi(f) is not given here since we only care about the SNR ( SNR ) in which only the amplitude affects (see Eq. ( 6 )). We use the cosmological parameters inferred by the observational results of Planck18 4 via the library astropy . The SNR of the inspiral signal with N_{\mathrm{det}} detectors is computed in the frequency domain, \rho(\mathcal{M}_{\mathrm{c}},z)=\sqrt{N_{\mathrm{det}}}\cdot\left[4\int^{\infty}_{0}\differential{f}\frac{|\tilde{h}(f;\mathcal{M}_{\mathrm{c}},z)|^{2}}{S_{\mathrm{n}}(f)}\right]^{1/2}\,. (6) Substituting Eqs. ( 4 ) and ( 5 ) to Eq. ( 6 ), we get \rho(\mathcal{M}_{\mathrm{c}},z)=\frac{\sqrt{N_{\mathrm{det}}}}{\sqrt{10}\pi^{2/3}}\cdot\frac{\mathcal{M}_{z}^{5/6}}{d_{\mathrm{L}}(z)}\bqty{ \int^\infty_0 \dd{f} \frac{f^{-7/3}}{S_\un(f)} }^{1/2}\,, (7) with \mathcal{M}_{z}=(1+z)\mathcal{M}_{\mathrm{c}}\,. (8) II.2 Population model We follow the reference 3 for calculating the

Read the complete text