Topology optimization of passively moving rigid bodies in unsteady flows

Yuta Tanabe a , {a,}, Kentaro Yaji b {b}, Kuniharu Ushijima a {a}, [12pt] a {a} Department of Mechanical Engineering, Tokyo University of Science,6-3-1, Niijuku, Katsushika-ku, Tokyo 125-8585, Japan · 2026

Read Topology optimization of passively moving rigid bodies in unsteady flows by Yuta Tanabe a , {a,}, Kentaro Yaji b {b}, Kuniharu Ushijima a {a}, [12pt] a {a} Department of Mechanical Engineering, Tokyo University of Science,6-3-1, Niijuku, Katsushika-ku, Tokyo 125-8585, Japan (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-18272.txt.

Introduction

Yuta Tanabe, Kentaro Yaji, and Kuniharu Ushijima design bodies that move because the flow pushes them. Their 2026 preprint proposes a topology optimization method for such passive movers. Sails and turbines are the classic cases: the body does not drive the flow; the flow drives the body. Most past frames treat the active case, where motion is imposed. The authors build an unsteady, time-dependent formulation for the passive case, where forces from the fluid set the motion.

Topology optimization lets an algorithm sculpt the body's shape for a goal. Passive movers harvest energy or hold station without motors. Designing them well serves wind power, sailing, and ocean devices. The method fills a clear gap in design tools.

Catalog record

CREATORYuta Tanabe a , {a,}, Kentaro Yaji b {b}, Kuniharu Ushijima a {a}, [12pt] a {a} Department of Mechanical Engineering, Tokyo University of Science,6-3-1, Niijuku, Katsushika-ku, Tokyo 125-8585, Japan
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE81 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-18272

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Topology optimization of passively moving rigid bodies in unsteady flows Yuta Tanabe a , {a,}, Kentaro Yaji b {b}, Kuniharu Ushijima a {a}, [12pt] a {a} Department of Mechanical Engineering, Tokyo University of Science,6-3-1, Niijuku, Katsushika-ku, Tokyo 125-8585, Japan Abstract This study proposes the topology optimization method for moving rigid bodies subjected to forces from fluid flow, such as sails and turbines, with an unsteady time-dependent formulation. Unlike existing topology optimization frameworks in which rigid-body motion drives the flow, which is referred to as active , the present study considers rigid-body motion induced by fluid forces, i.e., passive . The equations of motion governing the rigid-body dynamics are solved in a coupled manner with the continuity equation and the momentum conservation equations. The rigid body is represented on a design grid that is separated from the analysis grid on which the state and adjoint fields are defined. After updating the rigid body motion, the body is mapped onto the analysis grid. The fluid equations are solved using the lattice kinetic scheme, an extended version of the lattice Boltzmann method, owing to its suitability for unsteady flows. Design sensitivities based on the adjoint variable method are presented and applied to two- and three-dimensional problems involving translational and rotational motions. The optimized shapes for each problem are discussed from a physical perspective and compared with a reference shape or their binarized counterparts, providing insights into the effectiveness of the proposed method as well as its limitations. Keywords Topology optimization ⋅ \cdot Fluid flow ⋅ \cdot Unsteady problem ⋅ \cdot Moving rigid body ⋅ \cdot Separated design-analysis grids ⋅ \cdot Lattice Kinetic Scheme 1 Introduction There are many kinds of devices that operate by forces generated from fluid flows, such as sails and turbines. The efficiency of such devices depends on their shapes; therefore, optimizing their shapes is of significant interest. In this study, we propose a topology optimization method for rigid bodies driven by fluid-flow-induced forces. Topology optimization is one of the most powerful methods for obtaining shapes optimized with respect to a given objective function under some constraint functions. This method was originally developed in the field of structural mechanics by [ 5 ] and was later extended to fluid problems by [ 7 ] . Although their work [ 7 ] addressed only Stokes flow, extensive studies have subsequently been conducted for various fluid problems, including laminar steady Navier–Stokes flows [ 13 , 27 ] , turbulent flows [ 19 , 10 ] , unsteady flows [ 20 , 9 ] , and non-Newtonian flows [ 30 , 45 ] . Within this context, by considering a variety of objective and constraint functions, topology optimization has been applied to a wide range of engineering designs, such as airfoils [ 18 , 23 , 14 ] , fluid diodes [ 24 , 32 ] , and microfluidic mixers [ 4 , 11 ] . A comprehensive review of existing studies on fluid topology optimization can be found in [ 1 ] . Although the applications mentioned above concern stationary components, topology optimization has also been applied to moving components, such as rotors [ 31 , 26 ] and screw-type pumps [ 2 ] . However, these studies mainly focus on devices whose motion is prescribed a priori; in other words, devices that drive fluid flow rather than devices driven by it. Several works have examined the motion of particles [ 3 , 42 , 44 , 8 ] as moving entities driven by fluid flow. In these studies, the objective functions are defined in terms of particle motion, such as travel distance or final position. However, the optimization targets are stationary fluid channels, and the particles do not affect the fluid flow—i.e., a one-way coupling. In contrast, this study focuses on optimizing the shape of a rigid body that is itself driven by fluid-flow forces. The governing equations for fluid flow are solved in conjunction with the rigid-body equation of motion. The forces appearing in the equation of motion are computed from the fluid flow, and the objective function is defined in terms of the rigid-body motion, such as displacement or rotation. A closely related field is fluid–structure interaction (FSI), in which the governing equations for fluid flow are coupled with those for structural deformation. The pioneering work on the topology optimization for FSI problems was conducted by [ 41 ] . Following this initial study, topology optimization for FSI has been extensively investigated using various approaches [ 16 , 17 , 28 , 29 , 12 , 22 ] and problem settings [ 25 ] . While early studies considered only infinitesimal deformations and were restricted to steady-state fluid flow, more recent works have addressed large deformations [ 33 ] and unsteady fluid flows [ 43 ] . However, the primary focus of that research field is structural deformation; when locomotion is treated, the objective is typically to minimize it [ 25 ] , whereas the present study focuses on maximization of locomotion. Consequently, typical benchmark problems in those studies involve cantilever beams or walls subjected to fluid forces. The core technique enabling the treatment of moving rigid bodies subjected to fluid-flow forces is the grid separation approach [ 39 ] . In this approach, the design grid, where the shape is defined, is separated from the analysis grid, where state variables such as fluid velocity and pressure are computed. At each time step, the design grid undergoes rigid-body motion and is then overlapped on the analysis grid. Quantities such as the Brinkman coefficient and the velocity of points on the rigid body are transferred from the design grid to the analysis grid. Because this approach directly represents rigid-body motion, it is well suited for problems involving rigid bodies driven by fluid flow. Notably, the key difference between this work and the previous one [ 39 ] lies in the treatment of the rigid-body motion. In the previous work, the rigid-body motion is active , that is, the motion is prescribed and drives the fluid flow. In contrast, in this work, the motion is passive , such that the rigid-body motion is fully coupled with the fluid flow, and the motion variables, including the position and velocity of the rigid body, are treated as additional state fields. Rigid-body motion and fluid flow are solved simultaneously as an unsteady coupled problem. Fluid flow is computed using the Lattice Kinetic Scheme (LKS) [ 15 ] , an extended version of the Lattice Boltzmann Method (LBM) [ 21 ] . LBM-family solvers are inherently suited for unsteady fluid problems and are therefore appropriate for the problems addressed here. Design sensitivities are computed using the adjoint variable method formulated for LKS, known as the Adjoint Lattice Kinetic Scheme (ALKS) [ 38 ] . Because the original ALKS is derived in a continuous formulation in both time and space for stationary, non-moving structures and therefore considers only the fluid-flow equations, this study presents adjoint equations and design sensitivities that couple the fluid-flow equations with the rigid-body equation of motion. The design sensitivities obtained with the proposed method are also verified by comparison with finite difference approximations. After obtaining the design sensitivities, the shape is updated

Read the complete text