Accelerating Update Broadcasts Over LoRaWAN Downlink via D2D Cooperation

Anshika Singh, Siddhartha S. Borkotoky · 2026

Read Accelerating Update Broadcasts Over LoRaWAN Downlink via D2D Cooperation by Anshika Singh, Siddhartha S. Borkotoky (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-18134.txt.

Introduction

Anshika Singh and Siddhartha S. Borkotoky speed up how updates reach far-flung devices over LoRaWAN. Their 2026 preprint deals with broadcast of updates like security patches and learned models. Long range networks serve sensors spread over wide areas, often on batteries. Sending one update to every device through the gateway alone is slow and fragile. The authors study reliable over-the-air broadcast in this setting.

Their route uses device-to-device cooperation. Devices that got the update can pass it on to neighbors. Cooperation can lift coverage and cut the gateway's load. Secure, timely updates are vital as billions of small devices join networks. The work targets a quiet bottleneck in the Internet of Things.

Catalog record

CREATORAnshika Singh, Siddhartha S. Borkotoky
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE42 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-18134

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Accelerating Update Broadcasts Over LoRaWAN Downlink via D2D Cooperation Anshika Singh, Siddhartha S. Borkotoky Abstract Broadcast distribution of updates (e.g., security patches, machine learning models) from a server to end devices (EDs) is a critical requirement in the Internet of Things (IoT). In this paper, we consider the problem of reliable over-the-air broadcast of updates in Long Range Wide Area Networks (LoRaWANs). Existing broadcast techniques for LoRaWANs suffer from long delivery delays due to low data rates and duty-cycle constraints. We address this problem by proposing a device-level cooperative mechanism, in which updated EDs broadcast a few update fragments to accelerate delivery to their neighbors. We demonstrate large reductions in the delivery time compared to conventional methods. For instance, in a 400-node network spanning 1 km radius and operating at 1% duty-cycle, the proposed scheme reduces the time required to deliver a 10 kilobyte update to an ED at the network’s edge from 42 hours to 45 minutes. The proposed solution thus provides a pathway toward improved security and efficient realization of edge intelligence in LoRaWAN IoT. I Introduction The LoRaWAN communication standard is characterized by its ability to support low-power, long-range data transmission. It has thus enabled a broad range of IoT applications such as smart cities, smart agriculture, remote monitoring, and Industry 4.0. In such IoT deployments, it is often necessary to broadcast updates to end devices (EDs). These updates may include security patches that address newly discovered vulnerabilities or firmware upgrades that introduce new functionalities. Update broadcasts are also essential for supporting distributed machine learning (ML) in IoT networks. For instance, in the popular distributed-ML paradigm known as federated learning, a server must iteratively broadcast global ML model updates to EDs. The need for reliable update dissemination has led to the development of the paradigm called firmware updates over the air (FUOTA). The FUOTA Working Group within the LoRa Alliance defines guidelines for FUOTA over LoRaWAN [ 13 ] . In this framework, an update server divides the update into fragments, each small enough to fit a LoRaWAN link-layer frame. The frames are multicast via a gateway to all EDs that require the update. A representative FUOTA model for LoRaWAN is shown in Fig. 1 . The FUOTA framework can also be used to transfer other updates, such as an ML model. Therefore, in the remainder of this paper, we use FUOTA as an umbrella term for the broadcast or multicast transfer of updates (firmware, ML model, etc.) from a gateway to multiple EDs in a LoRaWAN. Fig. 1 : Representative model of a LoRaWAN in which a subset of the EDs require a firmware update. The update recipients are shown in red. The gateway multicasts the update frames produced by the firmware update server. A key challenge in FUOTA is the long time required to deliver updates. LoRaWAN frames have modest data rates, sometimes as low as 300 bps. The transmissions are further constrained by strict regional duty-cycle limits. For instance, devices in the 868 MHz band in the EU are limited to a 1% transmitter duty cycle, necessitating idle periods between successive update fragments. These limitations can lead to substantial delivery delays. For example, consider a 10 kB update divided into 200 fragments of 50 bytes each. With spreading factor (SF) 12 and 125 kHz bandwidth, each fragment has an on-air time of roughly 2.8 s, yielding a total of 560 s of airtime. Under a 1% duty cycle, the minimum delivery time becomes 56,000 s ( \approx 15 h). In practice, some fragments will be lost and retransmitted, leading to a much longer delivery time. This can be unacceptable for time-sensitive security patches and can significantly delay the convergence of iterative distributed ML methods such as federated learning. Using higher data rates (lower SFs) can reduce update time, but only when the frame-loss rate is low. To ensure acceptable reliability for all recipients including those far from the gateway, low data rates (high SFs) are typically required. A practical workaround is to deploy multiple gateways. Each gateway then covers a smaller area and can transmit at higher data rates. However, this raises infrastructure cost and undermines LoRaWAN’s primary advantage of wide-area coverage. As a remedy, we propose a method to accelerate update delivery in LoRaWAN without deploying additional gateways. The approach leverages device-to-device (D2D) communication: once an ED receives the complete update, it broadcasts a few fragments to other EDs. These unfinished EDs then collect fragments from both the D2D links and the gateway, yielding significantly faster update completion than conventional gateway-only delivery. II Related Work The FUOTA working group has released multiple specifications addressing different aspects of FUOTA [ 2 , 4 , 14 , 1 , 3 ] . Of particular interest is [ 14 ] , which considers the fragmentation of the update for transmission as link-layer frames. Noting the need to mitigate the effect of frame erasures for reliable update delivery, [ 14 ] recommends the use of forward-erasure correction (FEC). In FEC, the source transmits redundant (coded) fragments, which are linear combinations of source fragments. The redundancy helps compensate for frame losses, thus improving reliability. In [ 6 ] , the authors study the effect of link-layer parameters on FUOTA performance. FEC is used for frame recovery. They report that lower data rates improve update efficiency but increase delivery delay, consistent with the findings of [ 7 ] . Practical FUOTA-based dissemination of tiny-ML models in LoRaWAN is demonstrated in [ 23 ] , where a pre-trained model is broadcast to EDs deployed on an agricultural field. The above approaches employ a best-effort model. In this model, the update session ends after a fixed number of fragments have been sent. However, this does not ensure the delivery of the complete update to all EDs. Rateless-coding–based FEC solutions in [ 27 , 28 ] address this by allowing the gateway to continue transmitting coded fragments until all devices complete the update. In the multi-SF group-based method of [ 21 ] , EDs are grouped by distance and assigned distinct SFs, with multicast performed group-wise; this reduces energy consumption but increases delay [ 10 ] . A tunable delay–energy trade-off is provided in [ 10 ] , where the gateway cycles through SFs without grouping EDs. All these methods rely solely on gateway transmissions. To our knowledge, this paper is the first to consider a D2D-aided strategy for FUOTA over LoRaWAN. Indeed, D2D communications have been studied in many contexts, ranging from industrial IoT [ 24 ] to cognitive radio networks [ 16 ] . Examples of the use of D2D communications in LoRaWANs include [ 22 , 12 , 25 ] . However, existing works either consider the establishment of D2D data transfer sessions with the help of the network server [ 22 ] or use EDs as D2D relays to transmit device data on the uplink [ 12 , 25 ] . We instead target reliable downlink delivery of complete updates using scalable, server-independent D2D communications among EDs. Rateless codes lend themselves well to device-level cooperation for accelerating update transfer. This is illustrated, for example, in [ 9 , 30 , 8 ] . In these works, broadcast recipients

Read the complete text