Analysis of inviscid shear instability of axisymmetric flows
Kengo Deguchi 1, Haider Munawar 1, Runjie Song 1 · 2026
Read Analysis of inviscid shear instability of axisymmetric flows by Kengo Deguchi 1, Haider Munawar 1, Runjie Song 1 (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-18029.txt.
Introduction
Kengo Deguchi, Haider Munawar, and Runjie Song derive simple tests for when a swirling flow stays calm. Their 2026 preprint studies inviscid shear instability in axisymmetric flows. The base flows run in annuli and pipes. The authors seek plain criteria that say whether such a flow is stable or will break into disturbance. They treat both symmetric and non-symmetric disturbance types.
Their sufficient condition for stability sharpens a classical result. It builds on the second Kelvin-Arnold stability theorem. Simple, sound tests save heavy computation in design work. Flows in pipes and rings sit inside engines, reactors, and lab rigs, so the tests have wide reach.
Catalog record
| CREATOR | Kengo Deguchi 1, Haider Munawar 1, Runjie Song 1 |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 66 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-18029
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Analysis of inviscid shear instability of axisymmetric flows Kengo Deguchi 1, Haider Munawar 1, Runjie Song 1 Abstract Simple analytical criteria are derived to determine whether axisymmetric base flows in annuli and pipes are stable or unstable. Both axisymmetric and non-axisymmetric inviscid disturbances are considered. Our sufficient condition for stability improves upon the classical result of 4 , following the idea of the second Kelvin-Arnol’d stability theorem. A novel sufficient condition for instability is also derived by extending the recently proposed hurdle theorem for parallel flows ( 9 ) . These analytical criteria are applied to annular and pipe model flows and are shown to effectively predict the neutral parameters obtained from eigenvalue computations of the stability problem. † † affiliation: 1 School of Mathematics, Monash University, VIC 3800, Australia 1 Introduction Axisymmetric flows arise in a variety of applications, including flows through annuli and pipes as well as round jets, and their stability has long been of considerable interest. In most practical situations, the Reynolds number is high, so viscous effects may be neglected. The inviscid approximation greatly simplifies the stability equations and often leads to fruitful mathematical results. An important contribution to the inviscid stability of axisymmetric base flows was made by 4 , who derived a convenient sufficient condition for stability. This result can be viewed as an extension of the well-known Rayleigh-Fjortoft stability condition for parallel flows ( 30 ; 16 ) . Although significant progress has since been made in the inviscid stability analysis of parallel base flows, somewhat surprisingly, applications to axisymmetric base flows remain scarce. 1 showed that two distinct sufficient conditions for stability exist through a pseudoenergy-based analysis, which is now known as Arnol’d’s method (see 35 also). Earlier, Lord Kelvin had also suggested the presence of two such conditions ( 38 ) . Owing to this historical development, those stability conditions are called the Kelvin-Arnol’d 1^{\rm st} and 2^{\rm nd} shear-stability theorems (KA-I and KA-II). The Rayleigh-Fjørtoft condition corresponds to KA-I, as does the result of 4 . For parallel flows, the KA-II conditions have also been well studied, particularly in the context of instabilities in planetary atmospheres (see 37 ; 13 ; 31 , for example) . Therefore, one might expect that the KA-II condition could also be applied to axisymmetric base flows to yield useful stability criteria; however, no such results have been explicitly derived in the literature. Except for a few special cases, the KA stability conditions generally fail to sharply detect points of neutral stability, as first demonstrated in the pioneering work of 40 . This limitation has motivated efforts to identify classes of base flows that admit sharp stability criteria and to simplify those criteria as much as possible. For example, 32 and 2 employed the Nyquist method, whereas 3 and 19 drew inspiration from the properties of certain quadratic forms. Despite being more numerically tractable than the full eigenvalue problem, these approaches still rely on the solution to a Fredholm integral equation or similarly complex criteria. Recently, 9 derived a simple sufficient condition for instability. The condition essentially depends on whether the reciprocal Rossby-Mach number, derived from the base flow, surpasses a threshold called the hurdle . Since this can be conveniently assessed using a simple graphical procedure, the result is referred to as the hurdle theorem . Although this condition does not sharply determine the neutral point, plotting the regions in parameter space where the hurdle theorem and the KA criteria hold allows one to roughly estimate the location of neutral points. In practice, this helps restrict the parameter range that needs to be explored in the eigenvalue problem. The proof by 9 follows the two-step approach that became popular after the seminal work of 20 : (i) first, demonstrate the existence of a neutral solution, and (ii) then show that an unstable mode emerges when this neutral state is perturbed. The essence of this approach can already be found in 40 . A mathematically rigorous proof of step (ii) was later provided by 27 , and more recently simplified by 24 . In step (i), the neutral solution is constructed through minimisation of the Rayleigh quotient. The central idea of 9 is to analytically derive a simple condition ensuring the existence of a neutral solution by estimating the minimum value with a suitable trial function. In this paper, we extend the sufficient stability condition of 4 and derive a simple sufficient condition for instability for axisymmetric base flows. The former is obtained following the aforementioned KA-II framework, while the latter is derived by generalising the hurdle theorem. For annular flows, the analysis proceeds in much the same way as for parallel flows, although the azimuthal wavenumber of the perturbations must be treated carefully. Pipe flows, however, require additional consideration, and the conditions must be modified from those for the annular case to obtain satisfactory results. The proposed stability conditions are applied to representative model flows to assess their practical usefulness. More specifically, we consider cases where shear flow and thermal convection coexist. Parallel shear flows, whether driven by a pressure gradient or by moving boundaries, tend to be inviscidly stable, as exemplified by plane Couette flow or plane Poiseuille flow. The first model flow we consider is sliding Couette flow (an annular version of Couette flow, see 17 , 10 ), coupled with thermal convection due to the temperature difference between the walls. The flow is designed so that, in the absence of the wall sliding effect, the system reduces to natural convection in a vertical annulus, a configuration frequently studied in the natural convection literature ( 7 , 42 , 21 , 41 ). The second model is a vertically oriented Hagen-Poiseuille flow with homogeneous internal heating. This model can be regarded as the pipe analogue of the channel model flow used to test the hurdle theorem in 9 , and it was also investigated by 34 and 29 . The performance of the stability conditions will be assessed by comparing their predictions with the numerically obtained neutral points. Those inviscid stability results are further compared with linearised Navier–Stokes computations. The structure of the paper is as follows. In the next section, we formulate the stability problem for axisymmetric base flows. Numerical methods for both inviscid and viscous stability problems are also introduced. Section 3 summarises the sufficient conditions for stability and instability derived in this paper. These conditions are applied to model flows in annuli and pipes in section 4 , with their derivation presented in section 5 . Finally, section 6 presents the conclusions. In the same section, we also discuss the implications of the present results for round jets, which originally motivated the work of 4 . 2 Formulation of the problem 2.1 Inviscid stability problem for axisymmetric base flows Let \mathbf{u}=u_{r}\mathbf{e}_{r}+u_{\varphi}\mathbf{e}_{\varphi}+u_{z}\mathbf{e}_{z} and p denote the velocity and pressure of an incompressible fluid in cylindrical coordinates (r,\varphi,z) , with \mathbf{e}_{r} , \mathbf{e}_{\varphi} , and \mathbf{e}_{z} the associated unit vectors. Periodicity of 2\pi/k is imposed in the z direction, with k denoting the axial wavenumber. We assume a steady axisymmetric base flow \mathbf{u}=U(r)\mathbf{e}_{z} directed along the axial direction, and assess its stability by examining the evolution of infinitesimal perturbations \tilde{\mathbf{u}}=\tilde{u}_{r}\mathbf{e}_{r}+\tilde{u}_{\varphi}\mathbf{e}_{\varphi}+\tilde{u}_{z}\mathbf{e}_{z}