Instabilities in Drying Colloidal Films: Role of Surface Charge and Substrate Wettability Journal: International Journal of Multiphase Flow
A. Madhav Sai Kumar a , A. Hari Govindha b , Ranajit Mondal a and Kirti Chandra Sahu c · 2026
Read Instabilities in Drying Colloidal Films: Role of Surface Charge and Substrate Wettability Journal: International Journal of Multiphase Flow by A. Madhav Sai Kumar a , A. Hari Govindha b , Ranajit Mondal a and Kirti Chandra Sahu c (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-17655.txt.
Introduction
A. Madhav Sai Kumar and co-authors study instabilities in drying colloidal films. When suspensions dry, particles deposit in complex patterns. Cracks and delamination often spoil the film. The team tests sessile droplets with silica nanoparticles. They vary particle surface charge and substrate wettability together. Both traits shape how the drop dries.
They track evaporation dynamics and final deposit shape. Crack patterns are part of the record. Coupled effects matter because real coatings vary both at once. Paints, inks, and printed films all face these flaws. Knowing which mix cracks worst guides better formulas. The study gives makers a map of charge and surface effects.
Catalog record
| CREATOR | A. Madhav Sai Kumar a , A. Hari Govindha b , Ranajit Mondal a and Kirti Chandra Sahu c |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 47 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-17655
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Instabilities in Drying Colloidal Films: Role of Surface Charge and Substrate Wettability Journal: International Journal of Multiphase Flow A. Madhav Sai Kumar a , A. Hari Govindha b , Ranajit Mondal a and Kirti Chandra Sahu c Abstract The drying of colloidal suspensions leads to complex deposition patterns, accompanied by instabilities such as cracking and delamination. In this study, we experimentally investigate the coupled influence of particle surface charge and substrate wettability on the evaporation dynamics, final deposition morphology, and crack patterns of sessile droplets containing silica nanoparticles. We examine the dynamics of two types of colloids, namely the negatively charged colloidal silica nanoparticles (Ludox TM50) and the positively charged silica nanoparticle (Ludox CL30), at concentrations ranging from 0.1 wt.% to 5.0 wt.%, deposited on glass, polystyrene, and polytetrafluoroethylene (PTFE) substrates with distinct wettability. Side and top-view imaging techniques are employed to capture the evaporation process and analyze the resulting cracks. Our results reveal that the nature of the particle charge and substrate wettability significantly affect the evaporation mode, with transitions observed between constant contact radius (CCR), constant contact angle (CCA), and mixed modes. TM50-laden droplets consistently exhibit radial cracks, whereas CL30 droplets display more randomly oriented and irregular cracks. At higher particle concentrations, TM50 suspensions form thicker deposits that undergo delamination, particularly on highly wettable substrates like glass. Quantitative analysis reveals that crack spacing and length follow power-law relationships with particle concentration. Additionally, the delamination behavior is strongly influenced by both the particle concentration and the type of substrate. We propose a mechanistic framework to explain the role of particle–substrate interactions in governing the observed cracking and delamination behaviors. Keywords: Evaporation, sessile droplet, drying, deposition patterns, delamination 1 Introduction The evaporation of complex fluids, such as colloidal dispersions, polymer solutions, and biological fluids, involves the irreversible removal of solvent, leading to the consolidation of solutes into dense deposits. This drying process plays a vital role in diverse applications, including paints and coatings [ Brinckmann and Stephan 2011 ] , cosmetics [ Yu et al. 2021 ] , microelectronics [ Davoust and Theisen 2013 , Prasad et al. 2014 ] , inkjet printing [ de Gans and Schubert 2004 , Lim et al. 2012 , Lim et al. 2009 ] , and lithography [ Kim et al. 2005 , He and Darhuber 2019 , Chang and Velev 2006 , Kim et al. 2016 , Yanagisawa et al. 2014 , Weldon et al. 2017 ] . The evaporation of particle-laden dispersions has been extensively studied in the sessile configuration, where it often results in a ring-like deposit of particles at the periphery, a phenomenon known as the “coffee-ring” effect [ Deegan et al. 1997 ] . This pattern arises from outward capillary flows induced by a non-uniform evaporative flux across the droplet surface [ Deegan et al. 1997 , Karapetsas et al. 2016 , Katre et al. 2021 , Katre et al. 2022 ] . Over the past few decades, significant progress has been made in understanding and controlling the evaporative assembly of colloidal particles into well-defined patterns, supported by theoretical predictions of internal flow and solute transport within evaporating droplets that demonstrated good agreement with experimental observations [ Deegan et al. 2000 ] . Both extrinsic factors, such as substrate properties [ Mondal et al. 2018 ] , drying configuration [ Mondal et al. 2018 , Mondal and Basavaraj 2019 , Mondal and Basavaraj 2020 ] , temperature [ Li et al. 2015 ] , and humidity [ Zhang et al. 2022 ] , and intrinsic parameters, including particle size [ Weon and Je 2010 ] , shape [ Yunker et al. 2011 , Dugyala and Basavaraj 2014 , Hodges et al. 2010 ] , surface charge [ Dugyala and Basavaraj 2014 , Bhardwaj et al. 2010 ] , particle density [ Liou et al. 2024 ] , dispersing medium [ Katre et al. 2021 , Katre et al. 2020 , Hari Govindha et al. 2022 , Gurrala et al. 2019 ] , and the presence of macromolecules [ Shao et al. 2020 , Still et al. 2012 , Rey et al. 2022 ] or small dissolved species [ Ma and Wang 2012 , Xu et al. 2017 , Shimobayashi et al. 2018 ] , have been shown to play crucial roles in dictating particle transport and deposition. These factors collectively influence the formation of intriguing deposit patterns [ Mondal et al. 2023 ] . A detailed review of the drying dynamics of colloidal droplets is available in Thampi and Basavaraj 2023 . The drying of colloidal dispersions that form particulate films on substrates often leads to mechanical defects such as buckling, wrinkling, cracking, warping, or delamination [ Mondal et al. 2023 , Lohani et al. 2020 , Lama et al. 2017 ] . While such defects are generally undesirable in applications like paints and coatings, controlled crack formation with designed periodicity holds promise for optical grafting and as lithographic templates for fabricating nano- and microfluidic channels. Fundamentally, these defects originate from the release of excess strain energy accumulated during the consolidation of particles as the solvent evaporates [ Dugyala et al. 2016 ] . Numerous studies have investigated crack formation and evolution in drying colloidal films, emphasizing the influence of material properties [ Mailer and Clegg 2014 , Dugyala et al. 2016 ] and external conditions [ Lama et al. 2016 , Lama et al. 2017 , Lama et al. 2018 ] . For instance, Giorgiutti-Dauphiné and Pauchard 2014 experimentally explored the relationship between spatial ordering and cracking onset to the mechanical properties of the gel and drying kinetics using sessile droplets of aqueous colloidal silica on glass substrates. Dugyala et al. 2016 demonstrated that particle shape significantly influences crack morphology. Specifically, they observed that spherical particles tend to form radial cracks, while ellipsoids lead to circular crack patterns. This transition reflects differences in particle self-assembly and local ordering, with cracks propagating along paths of least resistance to release the accumulated strain energy. A hydrodynamic model proposed by Lilin and Bischofberger 2022 linked the pore pressure within the deposit to the initiation of cracks and air invasion during drying, and was validated through experiments involving the evaporation of Ludox AS30 particles on glass. The study identified two distinct air invasion modes, governed by the interplay of pore pressure and capillary forces, which modulate internal stress distributions. Substrate stiffness also plays a key role, with softer substrates tending to produce circular cracks, while stiffer ones favor linear or radial crack patterns [ Lama et al. 2021 ] . Furthermore, Kumar et al. 2023 showed that particle polarity and surface charge impact crack spacing and propagation speed, with positively charged particles yielding wider and faster-growing cracks due to changes in adhesion and interparticle interactions. Surface charge plays a crucial role in governing film cracking behavior. By varying the pH of the suspension, Singh et al. 2009 experimentally examined the influence of zeta potential on the critical cracking thickness (CCT) of aqueous \alpha -alumina dispersions deposited on glass substrates. They observed that the CCT increases as the zeta potential approaches zero and subsequently decreases with further reduction in zeta potential. This non-monotonic behavior was attributed to changes in surface charge that alter