Uniqueness and stability in bottom detection through surface measurements of water waves
2026
Read Uniqueness and stability in bottom detection through surface measurements of water waves (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-17639.txt.
Introduction
Water wave measures at the surface can reveal the hidden bottom shape. That is a geometric inverse problem. This study uses the general water-waves system on a bounded part of the fluid domain. It asks if the bottom can be identified from surface data alone. It also asks how stable that recovery is. Small surface errors should not cause wild bottom errors. No author is named in the record.
Uniqueness and stability proofs guide real survey methods. Harbors and coasts need bottom maps for safe navigation. Surface-only sensing would cut survey cost a lot. The math tells users when to trust such maps. It also shows which data the bottom leaves no trace in.
Catalog record
| YEAR | 2026 |
|---|---|
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 100 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-17639
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Uniqueness and stability in bottom detection through surface measurements of water waves Abstract This paper investigates the geometric inverse problem of recovering the bottom shape from surface measurements of water waves. Using the general water-waves system on a bounded subdomain of the fluid domain, we address this inverse problem, focusing on the identifiability and the stability issues. We establish uniqueness and derive logarithmic stability estimates in the determination of the bathymetry on any fixed smooth, bounded, open domain 𝒪 ⊂ ℝ d \displaystyle{\mathcal{O}}\subset{\mathbb{R}}^{d} , d = 1 , 2 \displaystyle d=1,2 , from the knowledge of the free surface, its first time derivative, the velocity potential at a given instant t 0 \displaystyle t_{0} within 𝒪 \displaystyle\mathcal{O} , and the knowledge of the bottom along ∂ 𝒪 \displaystyle\partial\mathcal{O} . No further assumptions are required for uniqueness. For stability, we impose only a local fatness condition on the region between the bottom profiles, allowing us to adapt the size estimates method. Keywords— Water waves, Elliptic systems, Geometric inverse problems, Identifiability, Log-Log stability, Log stability, Size estimates, Bottom. 1 Introduction Knowledge of river and ocean bathymetry is indispensable for many engineering applications, including the design of offshore platforms and harbors [ 12 ] , the study of channel-flow hydrodynamics [ 15 , 31 ] , and the approximations of tsunami run-up [ 19 , 41 , 42 ] . Estimating this geometry is a challenging problem that often relies on in situ measurements [ 23 , 29 , 40 ] . However, these techniques are time-consuming and costly, especially for large aquatic domains [ 22 , 29 , 37 ] . Due to these limitations, an inverse-problem approach emerges to infer the underwater geometry by selecting appropriate governing equations for the flow dynamics and using measurements taken at the water surface. (See the review paper [ 38 ] and the references therein.)Crucially, surface measurements, such as the wave profile [ 17 , 35 , 36 , 43 ] or the surface velocity potential [ 1 , 17 ] , are more accessible than bottom topography [ 22 , 39 ] . In this work, we formulate the detection of the bottom profile as an inverse problem in which the flow dynamics is governed by the so-called general water–waves system [ 28 ] . This system describes the motion of a layer of an inviscid, incompressible, and irrotational fluid limited below by a solid bottom and above by a free surface, with both boundaries assumed to be parametrized. We define this spatial region as \Omega_{t}=\{(X,y)\in\mathbb{R}^{d}\times\mathbb{R},\;b(X)<y<\zeta(t,X)\},\hskip 9.24994ptd\in\{1,2\}. From [ 28 ] , the system reads \left\{\begin{array}[]{ll}\Delta\phi=0,&\hskip 9.24994pt\textrm{ in }\Omega_{t},\\ \partial_{t}\zeta+\nabla_{X}\zeta\cdot\nabla_{X}\phi=\partial_{y}\phi,&\hskip 9.24994pt\textrm{ for }y=\zeta,\\ \partial_{t}\phi+\frac{1}{2}\left(\left|\nabla_{X}\phi\right|^{2}+\left(\partial_{y}\phi\right)^{2}\right)+g\zeta=0,&\hskip 9.24994pt\textrm{ for }y=\zeta,\\ \nabla_{X}b\cdot\nabla_{X}\phi-\partial_{y}\phi=0,&\hskip 9.24994pt\textrm{ for }y=b.\end{array}\right. (1) Here, \displaystyle g stands for gravitational acceleration and \displaystyle\phi is the velocity potential related to fluid velocity \displaystyle U through the relation \displaystyle U=\nabla\phi . Throughout this paper, we set \nabla=\begin{pmatrix}\nabla_{X}\\[2.0pt] \partial_{y}\end{pmatrix}\hskip 9.24994pt\text{ and }\hskip 9.24994pt\Delta=\Delta_{X}+\partial_{y}^{2}. Moreover, we adopt the hypotheses outlined in [ 28 ] . Additionally, we exclude the case of water at rest, that is, we assume that the velocity \displaystyle U is not zero (a.e.). The system ( 1 ) can be reformulated to exclusively characterize the behavior on the free surface [ 44 ] . Following [ 14 ] and using the Dirichlet to Neumann operator (DNO), we obtain the following system: \left\{\begin{array}[]{ll}\partial_{t}\zeta=G(\zeta,b)\psi,\\ \partial_{t}\psi=-g\zeta-\frac{1}{2}\left|\nabla_{X}\psi\right|^{2}+\dfrac{\left(G(\zeta,b)\psi+\nabla_{X}\zeta\cdot\nabla_{X}\psi\right)^{2}}{2\left(1+|\nabla_{X}\zeta|^{2}\right)},\\ \zeta(0,X)=\zeta_{0}(X),\;\psi(0,X)=\psi_{0}(X),\\ \end{array}\right. (2) where \displaystyle\psi(t,X)=\phi(t,X,\zeta(t,X)) is the trace of the velocity potential at the free surface \displaystyle\zeta , and \displaystyle G is the so-called Dirichlet to Neumann operator , defined by \psi\longrightarrow G(\zeta,b)\psi=\sqrt{1+|\nabla_{X}\zeta|^{2}}\;\partial_{n}\phi_{|_{y=\zeta}}, (3) where \displaystyle\phi is the solution to the elliptic system \left\{\begin{array}[]{ll}\Delta\phi=0,\hskip 28.73712pt\textrm{ in }\Omega_{t},\\ \phi_{|_{y=\zeta}}=\psi,\;\partial_{n}\phi_{|_{y=b}}=0.\\ \end{array}\right. (4) For the well-posedness of ( 2 )-( 4 ) in different Sobolev spaces, we refer the reader to [ 2 , 28 ] . The inverse problem associated with ( 2 )-( 4 ) consists of recovering the bottom profile \displaystyle b from measurements taken at the water surface \displaystyle\zeta . In [ 35 ] , the problem is treated numerically. However, the approach requires standing wave profiles and thus has limited applicability in real-world settings [ 36 ] . In [ 43 ] , the standing wave assumption is removed by imposing a periodic velocity potential and small-amplitude waves. Recently, in [ 17 ] , the authors established mathematical uniqueness for this inverse problem without restrictions on velocity or wave type. Precisely, given two different bottoms \displaystyle b and \displaystyle b_{0} in \displaystyle C^{5}(\mathbb{R}^{d}) and their corresponding surface elevations \displaystyle\zeta,\,\zeta_{0} and velocity potentials \displaystyle\phi_{,}\,\phi_{0} , the authors proved that, if for some nonempty open set \displaystyle S in \displaystyle\mathbb{R}^{d} and for some time \displaystyle t_{0} we have \zeta(t_{0},X)=\zeta_{0}(t_{0},X)\neq 0,\;\;\psi(t_{0},X)=\psi_{0}(t_{0},X)\neq 0\;\;\text{and }\;\;\partial_{t}\zeta(t_{0},X)=\partial_{t}\zeta_{0}(t_{0},X),\hskip 9.24994pt\forall X\in S, then b(X)=b_{0}(X),\hskip 9.24994pt\forall X\in\mathbb{R}^{d}. However, the preceding result relies on an unbounded fluid-domain setting (or, equivalently, on a bounded fluid domain with solid, impermeable vertical walls) and on a smooth bathymetry (see [ 17 , Section 2.2] ). In [ 30 ] , the stability is addressed. However, due to geometric complexity, the authors restrict the stability analysis to the case \displaystyle\zeta(t_{0},x)=\zeta_{0}(t_{0},x) . Moreover, in the region between the bottoms, the study assumes that the set of intersection points between \displaystyle b and \displaystyle b_{0} is (at most) finite. Furthermore, the results require a bounded \displaystyle C^{1,1} domain with solid (impermeable) walls. To treat both bounded and unbounded fluid domains, we consider the inverse problem of detecting the seafloor over an arbitrary bounded open set \displaystyle\mathcal{O}\subset\mathbb{R}^{d} with boundary \displaystyle C^{1} . The choice of a bounded truncation of the fluid domain is motivated by our interest in establishing a stability estimate using results for elliptic systems that are available (to the best of our knowledge) only for bounded domains. Moreover, this truncation is essential for the numerical implementation that we intend to develop in future work; see Section 5 . Specifically, adopting the surface measurements of [ 17 , 30 ] , we consider the \displaystyle(d+1) -dimensional water–waves system ( 2 )–( 4 ) for \displaystyle d\in\{1,2\} on an unbounded fluid domain \displaystyle\Omega_{t} , and we study identifiability and stability for recovering an arbitrary bounded portion of the bottom \displaystyle b using measurements collected only above it. The unbounded fluid domain setting ensures that the well-posedness difficulties associated with ( 2 )–( 4 ) [ 7 ] are avoided. Moreover, in contrast to [ 30 ] , we do not confine our analysis to the situation in which the normal derivative of the velocity potential vanishes on vertical walls, since in our setting such walls are not necessarily impermeable. The primary objective of this paper is to prove stability and uniqueness under minimal assumptions. Specifically, we aim to prove identifiability for the geometric inverse problem on the truncated domain and show that we can recover the bottom profile without using inlet or outlet data for the velocity potential. Moreover, we aim to derive stability estimates without several conservative assumptions used in [ 30 ] . More precisely, we do not assume: (i) a homogeneous Neumann condition for the velocity potential on the vertical walls (e.g., on \displaystyle\Gamma_{b}^{\zeta} in Figure 1 ); (ii) that the two free surfaces coincide at some time \displaystyle t_{0} \displaystyle(\zeta(t_{0},\cdot)=\zeta_{0}(t_{0},\cdot)) ; (iii) that the