Low-Loss, High-Coherence Airbridge Interconnects Fabricated by Single-Step Lithography

J. B. Fu, B. Ren, J. D. Ouyang, C. Li, K. C. Q. Zhu, Y. G. Che, X. Fu, S. C. Xue, Z. H. Yang, M. T. Deng, J. J. Wu · 2026

Read Low-Loss, High-Coherence Airbridge Interconnects Fabricated by Single-Step Lithography by J. B. Fu, B. Ren, J. D. Ouyang, C. Li, K. C. Q. Zhu, Y. G. Che, X. Fu, S. C. Xue, Z. H. Yang, M. T. Deng, J. J. Wu (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-16416.txt.

Introduction

Fu and coauthors make air bridge links for chips in one lith step. Their 2026 preprint deals with links that hop over lines on a chip. Such hops cut stray links and let dense chips work well. Old builds need more than one step to form each hop. More steps add flaws and block fine scale builds.

One step builds form hops that are small, low loss and firm. Tests check loss and clean act of the new hops. Fine hops serve both fast chips and quantum gear. A plain build path eases scale up to real lines. The work is a craft step for chip makers.

Catalog record

CREATORJ. B. Fu, B. Ren, J. D. Ouyang, C. Li, K. C. Q. Zhu, Y. G. Che, X. Fu, S. C. Xue, Z. H. Yang, M. T. Deng, J. J. Wu
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE14 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-16416

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Low-Loss, High-Coherence Airbridge Interconnects Fabricated by Single-Step Lithography J. B. Fu, B. Ren, J. D. Ouyang, C. Li, K. C. Q. Zhu, Y. G. Che, X. Fu, S. C. Xue, Z. H. Yang, M. T. Deng, J. J. Wu Abstract Airbridges are essential for creating high-performance, low-parasitic interconnects in integrated circuits and quantum devices. Conventional multi-step fabrication methods hinder miniaturization and introduce process-related defects. We report a simplified process for fabricating nanoscale airbridges using only a single electron-beam lithography step. By optimizing a multilayer resist stack with a triple-exposure-dose scheme and a thermal reflow step, we achieve smooth, suspended metallic bridges with sub-200-nm features that exhibit robust mechanical stability. Fabricated within a gradiometric SQUID design for superconducting transmon qubits, these airbridges introduce no measurable additional loss in the relaxation time T 1 T_{1} , while enabling a 2.5‑fold enhancement of the dephasing time T 2 ∗ T_{2}^{*} . This efficient method offers a practical route toward integrating high‑performance three‑dimensional interconnects in advanced quantum and nano‑electronic devices. Introduction The continuous drive for miniaturization, increased functionality, and superior performance in modern integrated circuits, photonic integrated circuits, and micro-electromechanical systems necessitates the development of complex three-dimensional architectures. A critical challenge is creating high-performance, low-parasitic interconnections that can span over underlying components or other interconnect layers without introducing detrimental electrical, optical, or mechanical interference. Airbridge structures are an indispensable enabling technology for this purpose 13 ; 19 ; 2 ; 8 . In quantum information processing, airbridges are particularly important for realizing low-loss microwave resonators, essential coupling elements between qubits, and effective grounding strategies that suppress spurious electromagnetic modes, thereby directly enhancing qubit coherence and gate fidelity 5 ; 17 ; 16 ; 9 ; 1 . Conventional airbridge fabrication typically relies on multi-layer resist stacks and multiple lithography steps to define suspended metallic structures after selective etching of a sacrificial layer 23 ; 6 ; 18 ; 4 ; 3 . While functional, these methods require complex alignment across exposures and risk introducing organic residues or process-induced defects that can degrade quantum coherence 15 ; 12 , thereby hindering further miniaturization and high-density integration. Alternative single-step methods, such as gradient exposure 10 or two-photon lithography 9 , can form arched bridge profiles but face challenges in scaling to sub-micron dimensions. Here, we present a method for fabricating airbridges using only a single electron-beam lithography (EBL) step. By optimizing a multilayer resist composition and applying a triple-exposure-dose scheme followed by a thermal reflow, we achieve an undercut profile that yields smooth, suspended metallic bridges after development and lift-off. These single-lithography airbridges (SL-airbridges) feature sub-200-nm dimensions, a well-defined arch shape, and strong resilience to low-power ultrasonic treatment. This streamlined process can be directly integrated into quantum circuit fabrication without introducing additional decoherence sources. Figure 1: Schematic of the single-lithography airbridge (SL-airbridge) fabrication process. a , Deposition, patterning, and etching of a 100-nm-thick Al base wire. b , Spin-coating of a multilayer electron-beam resist stack. c , Patterning via EBL using three distinct exposure doses. d , Thermal reflow of the developed resist stack on a hotplate. e , Ion milling of the base metal contact areas followed by electron-beam evaporation of the bridge metal (150 nm Al). f , Lift-off and ultrasonic cleaning. g , Top-view scanning electron microscopy (SEM) image of a fabricated nanoscale airbridge. h , Side-view SEM image of an airbridge taken at an 85° stage tilt. Experiment setup The SL-airbridge fabrication sequence is illustrated in Fig. 1 . We start from introducing the carefully designed electron-beam resist stack. First, a 300-nm-thick layer of poly(methyl methacrylate) (PMMA, 950k molecular weight) is spin-coated on a substrate and baked at 160 ℃ for 10 minutes. This bottom layer defines the electrical contact region between the airbridge and the underlying circuit. Next, a 400-nm-thick layer of methyl methacrylate (MMA EL9) is spin-coated and baked under the same conditions. Finally, a 400-nm-thick blended resist layer, composed of PMMA and MMA in a 2:3 ratio, is spin-coated and baked. The blended top layer offers higher sensitivity than pure PMMA for forming the bridge profile while maintaining pattern stability during the subsequent thermal reflow. Patterning is performed using standard EBL. A critical aspect is the application of three calibrated exposure doses. The highest dose (exceeding 1000 \mu C/cm 2 ) fully exposes the entire resist stack to define the airbridge pedestal. An intermediate dose (300–500 \mu C/cm 2 ) exposes the MMA and PMMA/MMA blend layers to pattern the suspended bridge profile. The lowest dose (below 150 \mu C/cm 2 ) is designed to create a controlled undercut within the middle MMA layer, which is crucial for successful lift-off after reflow. After exposure, the sample is developed in a 1:3 mixture of methyl isobutyl ketone and isopropyl alcohol (MIBK:IPA) for 45 s. A thermal reflow step is then performed at 125 ℃, the glass transition temperature of PMMA, for a precisely controlled duration of 45 s. This step transforms the developed profile into a smooth, arched shape essential for continuous metal deposition. Figure 2: Control experiments of reflow and triple-dose exposure scheme. Comparison of SL-airbridges fabricated a without and b with the thermal reflow step and comparison of SL-airbridges fabricated c with a double-dose exposure scheme and d with the optimized triple-dose exposure scheme. Figure 3: Ultrasonic treatment tests of SL-airbridges. a , Optical images of a subset of the 60 test samples. b , Layout of a single test sample with four contact pads. c , Intact SL-airbridge after low-power ultrasonic treatment for 20 s. d , Damaged SL-airbridge after high-power ultrasonic treatment for 20 s. Metallization begins with argon ion milling to clean the contact areas and ensure low-resistance interfaces, followed by electron-beam evaporation of a 150-nm-thick aluminum film at normal incidence. Lift-off is carried out in an 80 ℃ N-methyl-2-pyrrolidone (NMP) bath. Low-power ultrasonic agitation is applied to remove edge residues and improve the bridge smoothness. Figures 1 (g) and (h) show representative SEM images of a completed SL-airbridge, which is 2 \mu m wide and approximately 200 nm high. The smooth edges indicate a high-quality lift-off process. A previously reported single-step lithography method using a triple-layer PMMA/MMA stack employed only two exposure doses and omitted thermal reflow 11 . The resulting airbridges exhibited rough edges, which could increase surface loss and electromagnetic radiation, thereby degrading quantum coherence. Furthermore, such structures could not tolerate ultrasonic cleaning, limiting their use in complex fabrication sequences. To highlight the importance of thermal reflow and the triple-dose strategy, we performed control experiments, shown in Fig. 2 . Without reflow, the deposited metal layers show rough edges and discontinuous connections [Fig. 2 (a)]. With reflow, the SL-airbridge maintains a smooth profile even at sub-micron scales [Fig. 2 (b)]. However, reflow alone tends to reduce the undercut, complicating lift-off and leading to raised metal walls, as seen in Fig. 2 (c). The triple-dose exposure scheme resolves this conflict by using a low dose to preserve a controlled undercut in the MMA layer after reflow. Airbridges fabricated with a double-dose scheme exhibit unstable, raised edges due to the resist slope [Fig. 2 (c)], whereas the triple-dose scheme yields smooth, well-defined edges [Fig. 2 (d)]. Figure 4: Enhanced qubit coherence with SL-airbridge interconnects.

Read the complete text