Gain-Layer Project Journal: NIM-A

Niels G. Sorgenfrei, Anna Rita Altamura, Cristina Besleaga, Georgia Andra Boni, Tomas Ceponis, Paul Erberk, Eckhart Fretwurst, Yana Gurimskaya, Kevin Lauer, Ludovico Massaccesi, Luca Menzio, Michael Moll, Marie Mühlnikel, Andrei Nitescu, Ulrich Parzefall, Roxana-Elena Patru, Jevgenij Pavlov, Ioana P · 2026

Read Gain-Layer Project Journal: NIM-A by Niels G. Sorgenfrei, Anna Rita Altamura, Cristina Besleaga, Georgia Andra Boni, Tomas Ceponis, Paul Erberk, Eckhart Fretwurst, Yana Gurimskaya, Kevin Lauer, Ludovico Massaccesi, Luca Menzio, Michael Moll, Marie Mühlnikel, Andrei Nitescu, Ulrich Parzefall, Roxana-Elena Patru, Jevgenij Pavlov, Ioana P (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-16049.txt.

Introduction

Niels Sorgenfrei and a large team track how a key layer in a photon sensor wears out. Their 2026 preprint deals with Low Gain Avalanche Diodes, built for use in high energy tests. Blast of rays harms the gain layer and cuts sensor life. No one yet knows the harm at the flaw level. Past tests used stuff with far less charge than real sensors.

The team sets out to close that gap with new tests. They probe the gain layer as rays break it down step by step. Clear flaw level proof would guide how to build tougher sensors. It would also help teams guess sensor life in hard ray fields. The work serves groups who build tools for big test halls.

Catalog record

CREATORNiels G. Sorgenfrei, Anna Rita Altamura, Cristina Besleaga, Georgia Andra Boni, Tomas Ceponis, Paul Erberk, Eckhart Fretwurst, Yana Gurimskaya, Kevin Lauer, Ludovico Massaccesi, Luca Menzio, Michael Moll, Marie Mühlnikel, Andrei Nitescu, Ulrich Parzefall, Roxana-Elena Patru, Jevgenij Pavlov, Ioana P
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE39 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-16049

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Gain-Layer Project Journal: NIM-A Niels G. Sorgenfrei, Anna Rita Altamura, Cristina Besleaga, Georgia Andra Boni, Tomas Ceponis, Paul Erberk, Eckhart Fretwurst, Yana Gurimskaya, Kevin Lauer, Ludovico Massaccesi, Luca Menzio, Michael Moll, Marie Mühlnikel, Andrei Nitescu, Ulrich Parzefall, Roxana-Elena Patru, Jevgenij Pavlov, Ioana Pintilie, Stephanie Reiss, Joern Schwandt, Valentina Sola Abstract Gain-layer degradation from exposure to radiation limits the use of Low-Gain Avalanche Diodes (LGADs) in high energy particle physics detector experiments. Proper understanding of how the gain-layer is destroyed is not available on a defect level. Only measurements for materials with much lower effective doping concentrations are available. The direct study of the gain-layer is not possible with typical defect spectroscopy measurements like Thermally Stimulated Currents (TSC) and Deep-Level Transient Spectroscopy (DLTS). To combat this problem and gain a better understanding of the processes which degrade LGADs, the Gain-Layer Project was started. This project produced 19 050 19\,050 diodes with various Boron, Phosphorus, Oxygen and Carbon concentrations. The material used is low-resistivity p p -type Silicon. The effective doping concentrations are in the order of a LGAD gain-layer. These diodes will serve the defect community in the coming years for various studies. This article introduces this project with detailed descriptions of the diodes, their flavours and their processing, and reports on results from I I – V V , C C – V V , SIMS and DLTS measurements on unirradiated diodes. † † graphicalabstract: This figure shows the increase of the leakage currents with higher Carbon implantation doses in diodes on Diffusion-Oxygenated Float-zone p -type Silicon with Phosphorus co-doping. † † highlights: Research highlight 1 Large production of Gain-Layer Project Diodes ( 19\,050 ) was successful Research highlight 2 Unirradiated diodes work well in I – V , C – V and DLTS measurements Research highlight 3 Most SIMS measurements showed a good agreement with the simulation of the processing Research highlight 4 Carbon implantation leads to higher leakage currents, which increase with higher Carbon doses Research highlight 5 These diodes can be used for defect studies to understand gain-layer degradation of LGADs with irradiation 1 Introduction Low Gain Avalanche Diodes (LGADs) are sensors with intrinsic gain developed for increasing the particle detection and timing performance in High Energy Physics (HEP) experiments. With a timing resolution of 2030\text{\,}\mathrm{ps} and an intrinsic gain in the order of 10, LGADs will be used as timing detectors at the upgraded High-Luminosity Large Hadron Collider (HL-LHC) [ 17 , 16 , 30 ] . The n^{++}-p^{+}-p-p^{++} structure of LGADs with a thin ( 12\text{\,}\mathrm{\SIUnitSymbolMicro m} ), highly doped p^{+} region (the gain-layer), provides strong enough electric fields near the junction contact to produce charge multiplication via impact ionisation [ 15 ] . The limiting factor for the use of LGADs in harsh radiation environments is the degradation of their gain-layer [ 34 , 20 , 14 ] . A reduction of the gain due to the exposure to radiation lowers the signal-to-noise ratio and degrades the time resolution. At some point, the gain-layer doping is fully compensated by the formation of radiation-induced defects [ 30 ] . This apparent deactivation of the gain-layer dopants is called Acceptor Removal Effect (ARE), and is directly observed as a variation in the effective doping concentration N_{\text{eff}} . The Boron dopants (acceptors) are deactivated or compensated by donor-like defects introduced into the Silicon lattice by radiation. The current understanding is that this is predominantly caused by the creation of Boron containing defects such as the Boron-interstitial-Oxygen-interstitial ( \text{B}_{\text{i}}\text{O}_{\text{i}} ) [ 35 , 7 , 36 , 29 , 8 , 9 , 10 ] or the Silicon-interstitial-Boron-substitutional ( \text{Si}_{\text{i}}\text{B}_{\text{s}} ) [ 27 , 1 , 4 ] defect centres. An effective way to mitigate the gain loss is Carbon co-implantation [ 30 ] , but the improvement in radiation hardness is still not enough to cover the lifetime of future HEP experiments, where extreme radiation fluences are expected. To understand the gain-layer degradation, a direct defect spectroscopy measurement of the gain-layer is needed. However, Deep-Level Transient Spectroscopy (DLTS), the most powerful technique for characterising electrically active defects, is unable to probe the complex structures of LGADs [ 6 ] . The Thermally Stimulated Currents (TSC) method can probe the LGAD structures [ 4 ] , but for a quantitative evaluation of the radiation damage in the gain-layer only, the doping profile in the implanted p^{+} thin layer, the temperature dependence of the gain as well as the damage in the bulk of the measured LGADs has to be well determined. Consequently, most studies have so far relied on measurements of standard n^{++}-p pad diodes with resistivities ranging from 50\text{\,}\mathrm{\SIUnitSymbolOhm}\text{\,}\mathrm{cm} to several \mathrm{k\SIUnitSymbolOhm}\text{\,}\mathrm{cm} , and irradiated at a maximum 1\text{\,}\mathrm{MeV} neutron equivalent fluence \Phi_{\text{eq}} of {10}^{15}\text{\,}{\mathrm{cm}}^{-2} [ 7 , 29 , 8 , 9 , 10 , 4 , 5 , 33 ] . Radiation-induced defects after higher irradiation fluences were not investigated so far. Further experimental measurements are required, together with new model development. New techniques that are able to handle large defect concentrations, such as Fourier Transform Infrared (FTIR) and Photo-luminescence (PL) spectroscopies, should be employed. Also, specially-designed samples should be fabricated for these studies. Moreover, the change of the fundamental semiconductor properties, e.g. the carrier mobilities and lifetimes, at extreme fluences are not precisely known, although they are needed for any detector design. The Gain-Layer Project was envisioned to address these issues. It aims to study defects in specially-engineered p -type pad diodes with a highly-doped bulk, which mimics the gain-layer of LGADs. We refer to these diodes as Gain-Layer Project Diodes (GLPDs). The project started in the framework of the RD50/DRD3 collaborations [ 37 , 12 ] , and produced 19\,050 diodes with bulk doping close to the doping levels used for establishing the gain-layers in LGADs, specifically designed for defect studies. Thus, planar n^{++}-p^{+}-p^{++} defect engineering Silicon diodes mimicking the gain-layer of LGADs with 3 different Carbon implantation doses, Boron ( 2\text{\,}\mathrm{\SIUnitSymbolOhm}\text{\,}\mathrm{cm}10\text{\,}\mathrm{\SIUnitSymbolOhm}\text{\,}\mathrm{cm} ), Phosphorus (for a partial compensation of Boron doping in the 2\text{\,}\mathrm{\SIUnitSymbolOhm}\text{\,}\mathrm{cm} wafers) and Oxygen content have been fabricated. They are processed on standard and Oxygen-Diffused Float-zone Silicon (FZ and DOFZ) wafers of 2\text{\,}\mathrm{\SIUnitSymbolOhm}\text{\,}\mathrm{cm}10\text{\,}\mathrm{\SIUnitSymbolOhm}\text{\,}\mathrm{cm} resistivity p -type substrate. They are designed to be thoroughly investigated from the microscopic point of view over a large fluence range, using DLTS, TSCap and TSC. TSC requires fully-depleted samples. However, these highly-doped substrates are expected to have very large depletion voltages. To allow full-depletion of a controlled volume, diodes with a thin ( \sim 2\text{\,}\mathrm{\SIUnitSymbolMicro m} ) layer with 10\text{\,}\mathrm{\SIUnitSymbolOhm}\text{\,}\mathrm{cm} resistivity are produced out of 2\text{\,}\mathrm{\SIUnitSymbolOhm}\text{\,}\mathrm{cm} substrates by compensating the Boron doping of the bulk with a Phosphorus implant at different energies. This solution also allows to study the Donor Removal Effect (DRE) and the possibility to exploit it to mitigate the ARE in gain-layers with Boron-Phosphorus co-implantation. GLPDs will be irradiated at different fluences, ranging from \sim {10}^{13}\text{\,}\mathrm{$\mathrm{n}_{eq}\mathrm{/}\mathrm{c}\mathrm{m}^{2}$} to over {10}^{16}\text{\,}\mathrm{$\mathrm{n}_{eq}\mathrm{/}\mathrm{c}\mathrm{m}^{2}$} . Different experimental methods will be used for defect characterisation as appropriate: DLTS up to {10}^{15}\text{\,}\mathrm{$\mathrm{n}_{eq}\mathrm{/}\mathrm{c}\mathrm{m}^{2}$} , TSC and TSCap up to {10}^{16}\text{\,}\mathrm{$\mathrm{n}_{eq}\mathrm{/}\mathrm{c}\mathrm{m}^{2}$} , and FTIR and PL spectroscopies above {10}^{16}\text{\,}\mathrm{$\mathrm{n}_{eq}\mathrm{/}\mathrm{c}\mathrm{m}^{2}$} . Charge Collection Efficiency (CCE), Transient Current Technique (TCT), charge carrier lifetime, Van der Pauw resistivity and Hall mobility measurements will also

Read the complete text