Influence of Charge Density Waves on the Hall coefficient in NiTi

Adrian Braun, Henrik Dick, Timon Sieweke, Alexander Kunzmann, Klara Lünser, Gabi Schierning, Thomas Dahm · 2026

Read Influence of Charge Density Waves on the Hall coefficient in NiTi by Adrian Braun, Henrik Dick, Timon Sieweke, Alexander Kunzmann, Klara Lünser, Gabi Schierning, Thomas Dahm (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-14772.txt.

Introduction

Adrian Braun and six co-authors study the Hall coefficient in NiTi in this 2026 paper. NiTi is a shape-memory alloy used in medical and engineering devices. The team presents a mean-field charge density wave theory for it. Their starting point is a density functional theory bandstructure, a computed map of the material's electronic states. From that base, they calculate the Hall coefficient as a function of temperature.

They compare the result with recent experimental results. They also analyze contributions to the Hall coefficient from different parts of the Fermi surface. They find the coefficient is dominated by certain hot spots. Readers get a theory of how charge density waves steer electrical response in a workhorse alloy.

Catalog record

CREATORAdrian Braun, Henrik Dick, Timon Sieweke, Alexander Kunzmann, Klara Lünser, Gabi Schierning, Thomas Dahm
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE39 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-14772

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Influence of Charge Density Waves on the Hall coefficient in NiTi Adrian Braun, Henrik Dick, Timon Sieweke, Alexander Kunzmann, Klara Lünser, Gabi Schierning, Thomas Dahm Abstract We present a mean-field charge density wave theory for NiTi using density functional theory bandstructure as a starting point. We calculate the Hall coefficient as a function of temperature and compare with recent experimental results. We analyze the contributions to the Hall coefficient from different parts of the Fermi surface and find that the Hall coefficient is dominated by certain “hot spots”. The analysis shows that these hot spots are mostly dominated by Ni d d -orbitals. We demonstrate that the Hall coefficient is not well reproduced by Boltzmann transport theory within the constant relaxation time approximation without charge density waves. We consider both uniaxial and biaxial charge density waves and show that biaxial charge density waves can account well for the Hall coefficient, while uniaxial cannot. We also investigate the temperature dependence of the resistivity and the specific heat. I Introduction The shape memory effect in NiTi is due to a highly reversible martensitic structural phase transition 40 ; 15 . A general understanding of the structural change has been achieved by molecular dynamics (MD) simulations either based on effective interatomic potentials 38 ; 24 or by ab-initio molecular dynamics (AIMD) 54 . However, a precise theoretical understanding of the transition temperature and the electronic properties of NiTi is still lacking. Molecular dynamics is based on the Born-Oppenheimer approximation 2 which assumes that the electrons can instantanously follow the motions of the nuclei. It thus neglects nonadiabatic effects like the retarded electron-phonon interaction, which is crucial to understand instabilities in the electronic system like charge density waves (CDWs), for example. There have been speculations about the possible formation of CDWs in NiTi already during the 1980s 41 ; 43 . Arguments in favor of this conjecture have been superlattice reflections in X-ray, neutron and electron diffraction 43 ; 52 , the appearence of a gap like feature in the optical conductivity and a suppression of the magnetic susceptibility in the martensitic phase 47 , Fermi surface nesting features seen in band structure calculations 41 ; 56 ; 50 , and phonon softening at a wave vector unrelated to the martensite phase 51 ; 55 . But also some doubts were raised 48 . Direct observation of a CDW by scanning tunneling microscopy (STM) or the CDW gap by angular resolved photoemission spectroscopy (ARPES) has been difficult due to the insufficient surface quality of this material. Also, to our knowledge a quantitative theoretical study on the appearance of CDWs in NiTi has never been presented, which would allow a more direct comparison between experiment and theory. Recent experimental results on electronic transport properties of this material found a strong decrease of the charge carrier density and a strong increase of carrier mobility in the martensite phase from Hall coefficient measurements. Also, a surprisingly large contribution of the electronic part of the entropy change at the phase transition was found 26 ; 27 , hinting towards a strong involvement of the electronic subsystem in the phase transition. In the present work we investigate a mean-field theory of the formation of different types of CDWs in NiTi based on ab-initio bandstructure. We calculate the Hall coefficient within this model and compare with the experimental data in an effort to gauge the possibility of a CDW forming in this material. Figure 1: Ground state energy relative to the B2 phase as a function of monoclinic angle. Figure 2: Fermi surfaces of (a) the B2 and (b) the B19’ phase. In section II we will review the current understanding of the structural phase transition in NiTi based on ab-initio molecular dynamics and introduce the bandstructures we are using. In section III we will present Boltzmann transport calculations based on these bandstructures and compare them with measurements of the Hall coefficient and resistivity. Our CDW mean-field theory is introduced in section IV and compared with experimental results. II Current understanding of the structural phase transition in NiTi NiTi undergoes a martensitic phase transformation from a high temperature simple cubic austenite B2 phase into a low temperature monoclinic martensite B19’ phase with a monoclinic angle of 98° 3 . There has been a long-standing discussion about the structure of the zero-temperature ground state of NiTi, as DFT calculations tended to yield an orthorhombic phase, the B33 phase, to be the most stable one, which is inconsistent with the observed shape memory effect, however 19 ; 16 ; 25 ; 54 . This puzzle has been resolved recently by Wu and Lawson, who could show that both the finite temperature entropic effects together with the zero-point energy of the phonons conspire to make the B19’ phase more stable than the B33 phase 54 . The martensistic transition temperature still was found to be 80 K above the experimental one, however. In Fig. 1 we present our own DFT calculation of the ground state energy as a function of monoclinic angle. We have used the QuantumEspresso package 14 ; 13 within the generalized gradient approximation using the more recent revised Perdew-Burke-Ernzerhof approximation for solids (PBEsol) 42 . For the ultrasoft pseudopotentials we used an energy cutoff of 100 Ry. Mazari-Vanderbilt cold smearing of 0.02 Ry was used 35 together with a 8\times 8\times 8 Monkhorst-Pack k -point grid. The lattice constants and the atomic positions within the unit cell were fully relaxed under the constraint of a fixed monoclinic angle. The ground state energies shown in Fig. 1 are in very good agreement with previous calculations 19 ; 54 . In contrast to previous work, we find a minimum of the energy at an monoclinic angle of 103.5°, however. We attribute this to our use of the PBEsol pseudopotential. We note that the energy curve becomes extremely flat in the range between \gamma=99 ° and \gamma=114 °, where the variation is below 1 meV/atom. The minimum at 103.5° is found to be just 0.06 meV/atom below the energy of the B33 phase. This result demonstrates that the position of the energy minimum is highly sensitive to small changes in the pseudopotential due to the flatness of the energy curve. We did not include the phonon zero point energy here, which is expected to shift the minimum further down to 101° 54 . As the experimentally observed monoclinic angle of the B19’ phase is 98° 3 , in the following we will restrict our discussion of electronic transport properties to a comparison of the cubic B2 phase and the B19’ phase. We will not aim to understand the transition region between these two phases, which is a hysteretic first order transition, but instead try to understand the behavior in the two limiting homogeneous phases. The Fermi surfaces in B2 and B19’ phases are shown in Fig. 2 , which are in good agreement with previous results 41 ; 56 ; 17 ; 50 . In the B2 phase there are two bands crossing the Fermi surface, denoted here in blue and red color. Centered around the \Gamma point one can see a large cube-like structure in blue with red “bowls” near the six

Read the complete text