An efficient treatment of heat-flux boundary conditions in GSIS for rarefied gas flows Journal: XXX
Yanbing Zhang, Ruifeng Yuan, Liyan Luo, Lei Wu · 2026
Read An efficient treatment of heat-flux boundary conditions in GSIS for rarefied gas flows Journal: XXX by Yanbing Zhang, Ruifeng Yuan, Liyan Luo, Lei Wu (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-13870.txt.
Introduction
Yanbing Zhang, Ruifeng Yuan, Liyan Luo, and Lei Wu speed up simulations of rarefied gas flows in 2026. Rarefied gas is thin gas where wall effects rule the flow. Heat-flux boundary conditions are hard to apply in a fast way. The wall-reflected gas temperature and density must be found as the computation runs.
Their work sits in the general synthetic iterative scheme, or GSIS. That scheme solves the Boltzmann kinetic equation in an outer loop. Macroscopic synthetic equations run in an inner loop. An efficient heat-flux treatment could cut cost for aerospace and vacuum work.
Catalog record
| CREATOR | Yanbing Zhang, Ruifeng Yuan, Liyan Luo, Lei Wu |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 47 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-13870
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
An efficient treatment of heat-flux boundary conditions in GSIS for rarefied gas flows Journal: XXX Yanbing Zhang, Ruifeng Yuan, Liyan Luo, Lei Wu Abstract Heat-flux boundary conditions are challenging to implement efficiently in rarefied gas flow simulations because the wall-reflected gas temperature and density must be determined dynamically during the computation. This paper aims to tackle this problem within the general synthetic iterative scheme (GSIS), where the Boltzmann kinetic equation is solved deterministically in an outer loop and macroscopic synthetic equations are solved in an inner loop. To avoid kinetic-macroscopic boundary-flux mismatch and the resulting convergence bottlenecks, for the macroscopic boundary flux at every inner iteration, the incident increment is estimated using a Maxwellian distribution, and then the reflected contribution is obtained by boundary conditions consistent with those in the kinetic solver. In addition to retaining the fast-converging and asymptotic-preserving properties of GSIS, the proposed method significantly reduces the iterations required to determine the wall-reflected gas parameters. Numerical simulations of rarefied gas flows in and around a 3D nozzle, a 2D adiabatic cylinder, and a 2D annular heat-transfer configuration show good agreement with the direct simulation Monte Carlo method, while achieving substantial efficiency gains over conventional iterative schemes. 1 Introduction Rarefied gas flows play an increasingly important role in modern engineering applications, such as spacecraft design, hypersonic flight, and vacuum technologies. In these situations, gas flows often depart from thermodynamic equilibrium, rendering the Navier-Stokes-Fourier (NSF) equations inadequate. The Boltzmann equation provides a fundamental mesoscopic description of gas dynamics and remains valid across all rarefaction regimes, making it essential for modeling rarefied gas flows. However, its numerical solution is highly challenging due to the high dimensionality of the velocity distribution function (VDF). As a result, solving the Boltzmann equation, through the stochastic direct simulation Monte Carlo (DSMC) method 5 or the deterministic discrete velocity method 3 , 22 , incurs prohibitive computational cost. Over the past decades, a wide range of multiscale numerical methods have been developed to solve the Boltzmann equation and its simplified kinetic models. These include hybrid NSF-DSMC coupling approach 28 , unified gas-kinetic scheme and their variants 32 , 12 , 16 , implicit-explicit Runge-Kutta method 8 , 7 , stochastic Fokker-Planck method 11 , general synthetic iterative scheme (GSIS) 26 , and unified stochastic particle method 9 , 10 , among others. Examining the development trends of these methods, it may be concluded that, to be efficient, they should satisfy several key criteria. First, asymptotic-preserving (AP) 15 : in near-continuum flow regimes, conventional schemes that treat streaming and collision separately impose severe restrictions on spatial cell size and time step. An AP method, however, correctly recovers the NSF limit and allows the use of spatial cells much larger than the molecular mean free path 32 , 38 . Second, fast convergence : since steady-state solutions are of primary interest in most applications, a numerical method should avoid unnecessary intermediate evolutions and converge rapidly to the steady state. Third, universality : because the Boltzmann collision operator becomes highly complex for polyatomic gases or chemically reacting flows, an effective numerical method should be applicable to a wide range of collision operators rather than being limited to simplified models such as the BGK or Shakhov models 4 , 24 . Fourth, simplicity and compatibility : the numerical procedure should be as simple as possible and ideally compatible with conventional computational fluid dynamics frameworks, facilitating practical implementation and extension. The GSIS has emerged as a representative framework that targets the above criteria 26 . In GSIS, the steady-state solution is obtained by alternately solving a kinetic equation and a set of macroscopic synthetic equations on the same spatial grid. The synthetic equations are derived from the kinetic model, reduce to the NSF system in the near-continuum flow regime, and incorporate rarefaction effects through the velocity moments of the numerical VDF in the transition and free-molecular flow regimes. The macroscopic synthetic solution, solved directly toward the steady state, is then fed back to guide the update of the VDF in the subsequent kinetic iteration. This two-way tight coupling endows the GSIS with fast-converging and AP properties 27 . The GSIS is also compatible with finite-volume and discontinuous Galerkin discretizations, as well as established techniques in computational fluid dynamics. More recently, it has been extended from linearized to nonlinear kinetic equations, to polyatomic gas and gas-mixture models, to gas-radiation coupling 37 , 35 , 33 , 34 , and even to boost DSMC simulations 19 , 20 , achieving computational efficiencies several orders of magnitude higher than those of conventional numerical schemes in large-scale 3D simulations 36 . It should be noted that most multiscale methods in rarefied gas dynamics assume a fixed wall temperature. In experimentally relevant conditions for thermal-management components 14 , heat-flux boundary conditions allow direct specification of energy transfer and yield consistent predictions across different Knudsen numbers. Unlike the continuum flow based on the NSF equations, implementing these conditions in kinetic simulation is challenging because the heat flux corresponds to a half-space moment of the VDF, and for diffuse boundary condition the VDF reflected from the wall depends on unknown wall temperature and gas density, which must be determined by simultaneously enforcing both impermeability and the prescribed energy flux 21 , 14 . Conventional numerical schemes, which lack global flow information exchange across the entire computational domain, require a prohibitively large number of iterations to determine the two unknown wall-reflected parameters. For example, in DSMC implementations of specified wall heat flux, the wall temperature is typically adjusted iteratively based on the sampled wall heat flux, and the convergence behavior depends on tunable relaxation/controlling factors and wall-sampling periods. As a result, millions of time steps are needed to determine the wall temperature in DSMC 31 , 1 , 2 . Even in GSIS, where the synthetic equation is of diffusion type and thus enables efficient global exchange of flow information, the macroscopic boundary flux must remain compatible with the kinetic boundary condition and be updated consistently; failing to do so turns the near-wall region into a convergence bottleneck and can compromise robustness, especially for large implicit time steps. This paper is dedicated to developing a consistent and efficient macroscopic boundary treatment that preserves kinetic–macroscopic compatibility for prescribed thermal wall conditions within the GSIS framework. The remainder of the paper is organized as follows. Section 2 presents the governing equations and summarizes the kinetic boundary-condition settings. Section 3 describes the numerical methodology, including the GSIS algorithm and the proposed consistent macroscopic boundary treatment used in the synthetic equations. Section 4 reports the computational results and provides detailed discussion on accuracy, robustness, convergence behavior, and efficiency. Finally, conclusions are given in Section 5 . 2 Governing equations In gas kinetic theory, the VDF f(t,\bm{x},\bm{v}) describes the state of a monatomic gas with three translational degrees of freedom, where t is time, \bm{x}=(x_{1},x_{2},x_{3}) is the spatial coordinate, and \bm{v}=(v_{1},v_{2},v_{3}) is the molecular velocity. The macroscopic variables are obtained by taking velocity moments of the VDF. For examples, the density \rho , flow velocity \bm{u} , and total energy per unit mass E are defined as \left(\rho,~\rho\bm{u},~\rho E\right)=\int_{\mathbb{R}^{3}}\left(1,~\bm{v},~\frac{1}{2}v^{2}\right)f\,\mathrm{d}\bm{v}. (1) The specific internal energy is e=E-u^{2}/2=\frac{3}{2}RT , and the pressure is p=\rho RT ,