Hybrid Epitaxial Al/InGaAs system: Solid-state dewetting and Al facet formation

A. Elbaroudy, N. Shaw, Sandra J. Gibson, B. D. Moreno, F. Sfigakis, J. Baugh, Z. R. Wasilewski · 2026

Read Hybrid Epitaxial Al/InGaAs system: Solid-state dewetting and Al facet formation by A. Elbaroudy, N. Shaw, Sandra J. Gibson, B. D. Moreno, F. Sfigakis, J. Baugh, Z. R. Wasilewski (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-13523.txt.

Introduction

A. Elbaroudy and co-authors grow hybrid films of aluminium on indium gallium arsenide and watch them bead and facet. Hybrid superconductor and semiconductor stacks can host bound states in the gap. In topological phases, a zero energy class of such states may show, called Majorana bound states. Such states draw wide hunt.

The team grows aluminium films by molecular beam on In0.75Ga0.25As at near room heat. They track how the film dewets as a solid and how facets form. Film form sets if bound states can live at all. For Majorana teams, growth facts on the base stack are ground work, not a side note.

Catalog record

CREATORA. Elbaroudy, N. Shaw, Sandra J. Gibson, B. D. Moreno, F. Sfigakis, J. Baugh, Z. R. Wasilewski
YEAR2026
COLLECTIONPAPERS
FORMATTXT
FILE SIZE31 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2601-13523

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Hybrid Epitaxial Al/InGaAs system: Solid-state dewetting and Al facet formation Preprint: AIP/123-QED A. Elbaroudy, N. Shaw, Sandra J. Gibson, B. D. Moreno, F. Sfigakis, J. Baugh, Z. R. Wasilewski Abstract Hybrid superconductor–semiconductor platforms can host subgap electronic excitations such as Andreev bound states (ABSs); in topological regimes, a special zero-energy class, Majorana bound states (MBSs), can emerge. Here we report the growth of epitaxial Al films by molecular-beam epitaxy on In 0.75 ​ Ga 0.25 ​ As \mathrm{In_{0.75}Ga_{0.25}As} under near-room-temperature substrate conditions. Using a combination of AFM/SEM, cross-sectional TEM, and in situ RHEED, we map how substrate temperature and Al deposition rate govern film morphology, continuity, and interface quality. We identify a growth window that yields continuous, superconducting Al films with an abrupt Al / In 0.75 ​ Ga 0.25 ​ As \mathrm{Al}/\mathrm{In_{0.75}Ga_{0.25}As} interface and no detectable indium interdiffusion. We further investigate the thermal stability of these films under in situ post-growth heating and ex situ annealing following surface oxidation. For unoxidized Al, rapid surface diffusion triggers solid-state dewetting at approximately 165 ∘ ​ C 165\,^{\circ}\mathrm{C} , resulting in the formation of { 111 } \{111\} -faceted Al islands. In contrast, the presence of a native oxide largely suppresses dewetting, with failure occurring only locally at surface defects. Annealing above the indium melting point ( 156.6 ∘ ​ C 156.6\,^{\circ}\mathrm{C} ) induces significant In surface migration in both cases, leading either to localized interfacial In inclusions beneath Al agglomerates or to uniform surface contamination at sites of localized layer breakdown. Together, these results define growth and annealing conditions for thermally robust epitaxial Al on III–V semiconductors and provide practical guidance for fabricating high-quality superconductor–semiconductor hybrid platforms for quantum devices. I Introduction Superconducting aluminum deposited in situ on III–V semiconductors—particularly InAs and InGaAs—forms the foundation of a broad class of quantum-hardware platforms. These include Andreev spin qubits, 13 gatemon and transmon devices, 6 and related proximitized circuits, 9 as well as topological-superconductor architectures aimed at realizing Majorana bound states. 12 ; 25 ; 22 ; 4 Implementations of Al–InAs hybrid systems typically employ either one-dimensional nanowires 22 ; 18 or two-dimensional electron-gas (2DEG) heterostructures. 28 ; 1 ; 4 ; 5 While nanowires enabled the first reported signatures of Majorana physics, 22 2DEG-based platforms offer superior lithographic scalability and device density, which are essential for implementing braiding and fusion protocols. 28 ; 1 Within these 2DEG architectures, material quality plays a decisive role. In situ deposition of aluminum—made possible by compatibility with molecular beam epitaxy (MBE)—is crucial for forming atomically clean semiconductor–superconductor interfaces. 18 Such interfaces are required to achieve a hard, proximity-induced superconducting gap with strongly suppressed subgap states. 7 In addition, ultrathin Al films can sustain large in-plane critical magnetic fields, a key requirement for driving hybrid systems into the topological regime. InAs is an especially attractive semiconductor partner, as it provides the three essential ingredients for topological superconductivity: high electron mobility, strong spin–orbit coupling, and a large effective g -factor. 1 ; 28 ; 4 Despite these favorable properties, the unambiguous experimental realization of a robust topological phase in Al/InAs systems remains an open challenge. Progress toward this goal depends critically on overcoming several materials-science challenges. Although the MBE growth of InAs-based 2DEGs is now well established, supported by mature epitaxial buffer designs that yield low dislocation densities, the near-surface quantum well (QW) remains highly sensitive to disorder and oxidation. To mitigate these effects, a thin InGaAs cap layer is commonly employed to protect the InAs QW. However, this cap must remain sufficiently thin to preserve a strong superconducting proximity coupling between the Al film and the 2DEG. 28 ; 8 Alternative cap materials, such as InAlAs, have also been explored to tune Fermi-level pinning and improve electrostatic gate control. 29 A second, equally important set of challenges arises during the aluminum deposition itself. Under ultra-high-vacuum conditions, Al exhibits high surface mobility on III–V surfaces, which promotes dewetting and discontinuous 3D film growth. Cooling the substrate to as low as -40~^{\circ}\mathrm{C} has been reported to be an effective strategy to suppress this behavior. 32 ; 28 ; 8 ; 27 ; 26 Beyond surface diffusion, interfacial chemical reactions can further complicate growth, leading to pitting, three-dimensional island formation, 27 or indium migration into the Al layer. These effects can perturb both the superconducting properties of the film and the electrostatics of the underlying 2DEG. Although various interlayers (e.g., AlAs, GaAs, AlSb) and growth optimizations have been developed to mitigate these issues, 27 ; 30 ; 26 ; 35 achieving reproducible control over the final film structure remains challenging. This difficulty is exacerbated by the large lattice and crystal-structure mismatch between Al and III–V substrates, which favors the nucleation of multiple competing crystal orientations. As these domains grow and coalesce, they form polycrystalline films whose complex grain structure can degrade key superconducting properties such as the critical temperature T_{\mathrm{c}} and the in-plane critical magnetic field. 8 In our prior work, we demonstrated an abrupt transition from three-dimensional island growth to two-dimensional, continuous Al films on In 0.75 Ga 0.25 As surfaces, controlled purely by the aluminum growth rate and the substrate thermal budget. 11 By employing a high Al deposition rate of 3~\text{\AA}\,\mathrm{s}^{-1} at a near-room-temperature substrate temperature ( \sim 14~^{\circ}\mathrm{C} ), we obtained continuous epitaxial Al films with uniformity comparable to those produced using low-temperature deposition at slow growth rate. 28 ; 32 ; 8 Here, we build on that result by further investigating the Al/In 0.75 Ga 0.25 As system grown at high deposition rates without an insertion layer. Using transmission electron microscopy (TEM) and electron energy-loss spectroscopy (EELS), we determine the crystal orientation of Al on InGaAs and assess indium interdiffusion into the Al film. We further characterize the superconducting properties of these layers and examine their thermal stability through post-growth annealing. Furthermore, we study the solid-state dewetting of these films upon annealing, showing how thermally driven film breakup and island faceting correlate with Indium interdiffusion. Together, these results clarify how interlayer-free, high-rate Al deposition can yield continuous superconducting films suitable for hybrid quantum devices, while delineating the thermal and kinetic limits beyond which interface reactions and dewetting degrade film quality. II Experiments All heterostructures in this study were grown in a Veeco GEN10 MBE system on InP (100) semi-insulating Fe-doped substrates. The growth sequence for each sample consisted of a lattice-matched \mathrm{In}_{0.53}\mathrm{Ga}_{0.47}\mathrm{As} buffer layer, followed by a 6 nm \mathrm{In}_{0.75}\mathrm{Ga}_{0.25}\mathrm{As} layer, and ending in an epitaxial Al layer with a target thickness of 10 nm. The Al deposition parameters, specifically the growth rate and substrate rotation, were quoted for each sample as summarized in Table 1 . This investigation builds upon our previous work, 11 in which Al layers were grown on stationary substrates. Sample G0972, used here, was grown at an Al rate of 3 \text{\AA}\,\mathrm{s^{-1}} , resulting in a continuous 2D Al thin film. In the present study, sample G1001 was grown at the same high rate ( 3.0~\text{\AA}\,\mathrm{s^{-1}} ) but with continuous substrate rotation ( 33.3~\text{rev}\,\mathrm{s^{-1}} ) to facilitate in situ RHEED study of surface reconstruction at four different azimuths simultaneously. Finally, sample G1100—a repeat of G1001—was grown to enable a dedicated in situ RHEED study of the Al dewetting dynamics, which

Read the complete text