Minimal-footprint photonic crystal nanolasers for biointegration
Catriona A. Thomson, Andreas Stühler, Nachiket Pathak, Valeryia Dzikevich, Marcel Schubert · 2026
Read Minimal-footprint photonic crystal nanolasers for biointegration by Catriona A. Thomson, Andreas Stühler, Nachiket Pathak, Valeryia Dzikevich, Marcel Schubert (2026) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2601-12561.txt.
Introduction
Catriona A. Thomson and four co authors work on photonic crystal nanolasers with a tiny footprint. Photonic crystals give unmatched control over how light is confined and guided. They also shape how light interacts with matter at small scales. That control has reshaped optics and spawned many practical devices over past decades.
A nanolaser built in such a crystal can be extremely small. Small size matters for the goal named here: biointegration. A laser that can sit inside or on biological tissue opens new sensing routes. The team stress a minimal footprint design for that end. Work of this kind links photonics with medicine and life science tools.
Catalog record
| CREATOR | Catriona A. Thomson, Andreas Stühler, Nachiket Pathak, Valeryia Dzikevich, Marcel Schubert |
|---|---|
| YEAR | 2026 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 29 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2601-12561
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Minimal-footprint photonic crystal nanolasers for biointegration Catriona A. Thomson, Andreas Stühler, Nachiket Pathak, Valeryia Dzikevich, Marcel Schubert Abstract Photonic crystals allow unprecedented control over how light is confined, propagates, and interacts with matter. Their development has had a transformative impact on optics and physics, and they remain the central platform for both fundamental discoveries and practical photonic technologies. However, the relatively large footprint and substrate-bound nature of photonic crystal structures have so far strongly limited their use as miniature optical devices or biointegrated sensors. Here, we overcome these limitations by identifying the minimal size of a 2D photonic crystal array needed to achieve lasing and describe the fabrication of substrate-less hexagonal laser particles with an active area as small as 30 µ m 2 30\text{\,}{\mathrm{\SIUnitSymbolMicro m}}^{2} . Massively parallel fabrication, robust detachment, and integration of the nanolaser particles into live cells is demonstrated. Crucially, by engineering spatial and spectral mode characteristics, we designed NIR-II probes with mode volumes on the order of tens of attolitres, an order of magnitude smaller than whispering gallery probes of similar dimensions. Such high light localization is comparable in scale to different organelles of eucaryotic cells. In the future, we expect that chemical or plasmonic functionalization of the device will enable label-free sensing of nanoscale intracellular processes, and that it shall serve as a miniature platform to exploit developments in optical and quantum sensing for chemical and biological applications. \setarticletype Pre-print 1 Introduction Figure 1: A small-footprint L3 photonic crystal nanolaser particle of InGaAsP: (a) |E|^{2} distribution of the fundamental L3 mode of the optimized design on a finite-sized hexagonal particle. The five perturbed holes are highlighted in red. (b) 3D representation of the mode shown in (a), highlighting the strong localization of the field inside the defect area. (c) SEM images of fabricated nanolaser particles. Top: top-view of an optimized L3 cavity, showing the accurate placement of the perturbed holes (scale bar: 100\text{\,}\mathrm{nm} ). Bottom-left: Detached optimized L3 nanolaser particle resting on the substrate after ultra-sonication (scale bar: 500\text{\,}\mathrm{nm} ). Bottom-right: Titled view of the defect area (scale bar: 500\text{\,}\mathrm{nm} ). Figure 2: Determining the minimum array size for the optimized L3 cavity array nanolaser particles. (a) Threshold curves of nanolaser particles showing the emitted power as function of the pump energy for PhC cavities of various sizes. (b) Calculated quality factors corresponding to the threshold curves in (a). (c) Summary of laser threshold energies (triangles) and maximum quality factors (circles) plotted over the array diameter. (d) Lasing spectra at a pump energy of 34.7\text{\,}\mathrm{pJ} for nanolaser particles with increasing array diameter. Measured SEM images of three nanolasers are overlaid for size comparison, where the array of adjacent holes (optimized positions highlighted in red) is schematically shown. Colours correspond to the previous panels. For each nanolaser size, the number of air holes adjacent to one side of the L3 defect is also stated. Arrays with less than 4 adjacent holes did not show lasing. Figure 3: L3 nanolaser particles inside live fibroblast cells. (a) Schematic overview of the procedures used to fabricate detached nanolaser particles and their addition to live cell cultures. First, the hole array and trench around each device are defined by e-beam lithography. After dry-etching through all wafer layers, wet-etching the InP substrate layer with hydrochloric acid allows each device to fall onto the etch-stop layer (also InGaAsP). Ultrasonication in PBS detaches the nanolaser particles into solution. Replacing PBS with cell media, the solution is added to cells and incubated for 24 hours to allow for nanolaser internalization. (b) SEM images of nanolasers after wet-etching and brief ultrasonication step (left). Scale bar, 10\text{\,}\mathrm{\SIUnitSymbolMicro m} . Longer ultrasonication detaches almost all nanolaser particles (right). Scale bar, 10\text{\,}\mathrm{\SIUnitSymbolMicro m} . (c) Normalized lasing spectra from an optimized L3 nanolaser inside a live fibroblast cell, measured at three different pump energies. (d) Brightfield microscopy time-lapse imaging of fibroblast cells and an intracellular nanolaser, covering a period of 4 hours. Scale bar, 100\text{\,}\mathrm{\SIUnitSymbolMicro m} . (e) Confocal fluorescence microscopy image of fixed fibroblasts with stained cytosol (purple), nucleus (orange), and a L3 nanolaser (cyan). Scale bar, 10\text{\,}\mathrm{\SIUnitSymbolMicro m} . Photonic crystals (PhCs) are among the most advanced and versatile optical technologies currently available. They have been instrumental in understanding the similarities between light and matter waves by representing a photonic version of the periodic structure of ordered atoms inside crystalline materials. Many other directions of modern physics have used PhCs as a platform to study the related optical analogue, including phenomena related to wave chaos or topological science. Two-dimensional semiconductor slabs patterned with circular, triangular or square air-holes are the basis for the majority of functional PhC devices performing in the visible to terahertz domain. Creative design choices based on the superposition and perturbation of PhC lattices – leveraging intuition, topological theory, and inverse design algorithms [ 12 ] – enable high control over the resultant photonic modes confined to the dielectric slab. In recent years there have been significant advances in the development of devices exhibiting optimized out-coupling [ 21 , 30 ] , fabrication-error tolerance [ 40 ] , multi-mode operation [ 37 ] , subdiffraction limited optical field volumes, and exceptionally high quality factors (Q-factors) [ 28 , 18 , 19 , 22 , 21 , 42 ] . PhC light confinement and guiding has been exploited for cavity quantum electrodynamics [ 45 ] , on-chip optical communications [ 25 , 27 ] , and low-threshold lasing, with one of the most practical applications being in extremely powerful electrically-driven lasers for commercial and clinical applications [ 24 , 14 , 46 ] . Harnessing the strong light-matter coupling offered by their small mode-volumes and high Q-factors, chemical and biosensing with PhCs is also an active field, based on resonant wavelength shifts due to refractive index changes in the evanescent field [ 11 , 16 , 7 , 33 , 29 , 43 , 9 , 13 ] , with some cavities including surface biofunctionalization or plasmonic elements for further mode confinement [ 17 , 6 , 44 ] . Given their high configurability and potential for mass production, PhC cavities are well suited to the ambitious lab-on-chip vision, to interrogate multiple or complex biological signals on an ultra-compact system for the detection of disease [ 43 , 23 , 35 ] . However, as most PhC devices are confined to the substrate plane, there has been limited demonstration of direct interfacing with the cellular environment, with the most promising demonstration being a photonic crystal needle probe which achieved in vitro label-free protein sensing inside a single cell [ 34 ] . Alternative micro and nanoscopic optical devices have been used for complete biointegration down to the single cell level, arguably enabled by their significantly simplified structures and fabrication. For example, intracellular microlasers represent a fast developing technology that aims to generate bright and spectrally narrow signals to encode real-time chemical and physical information about the cellular environment, and to serve as cellular barcodes [ 36 , 20 , 5 , 15 , 8 , 38 , 39 ] . First demonstrations of intracellular lasers used spherical resonators to support whispering gallery modes (WGMs) oscillating just within the resonator’s perimeter [ 31